- Каталог оборудования Siemens
- Каталог продуктов Siemens Industry
- Приводная техника
- Преобразователи
- Стандартные преобразователи
- Общая информация о базовых преобразователях SINAMICS V
- Преобразователи частоты общего назначения SINAMICS G
- Высокопроизводительные преобразователи SINAMICS S
- Сервопреобразователь SINAMICS S110
- SINAMICS S120
- Excellence in Motion Control
- Системный обзор
- System data
- Модули контроля
- Сетевые модули и сетевые компоненты питания
- Модули двигателей
- SINAMICS S120 Chassis Format Units
- Air-cooled units
- Power Modules
- Active Line Modules
- Active Interface Modules
- Smart Line Modules
- Basic Line Modules
- Motor Modules
- Mounting device for power blocks
- Liquid-cooled units
- Power Modules
- Active Line Modules
- Active Interface Modules
- Basic Line Modules
- Motor Modules
- System components
- Line filters
- Line reactors
- Recommended line-side system components
- Braking Modules
- Braking resistors
- DC link fuses
- Motor reactors
- dv/dt filters plus VPL
- dv/dt filters plus VPL
- dv/dt filters compact plus VPL
- Sine-wave filters
- Safe Brake Adapter SBA
- Силовые модули
- Дополнительные системные компоненты
- Компоненты
- Кабели и штекеры MOTION-CONNECT
- Инструментальное программное обеспечение
- Safety Integrated
- Конфигурирование
- Сервис и документация
- Услуги и документация
- Приводная система SINAMICS S120
- Сертификация
- SIPLUS SINAMICS S120
- SINAMICS S120M distributed servo drive
- SINAMICS S120 Combi
- SINAMICS S120 Chassis Format Units
- SINAMICS S120 Cabinet Modules
- SINAMICS S150 converter cabinet units
- MICROMASTER
- SIPLUS POSMO A
- SIMODRIVE POSMO
- LOHER DYNAVERT Drive System
- Преобразователи на среднее напряжение
- Преобразователи постоянного тока
- Стандартные преобразователи
- Двигатели переменного тока
- Generators
- Мотор-редукторы
- Flender Gear Units
- Couplings
- Инструментальное программное обеспечение
- Дополнительные компоненты
- Преобразователи
- Техника автоматизации
- Energy
- Автоматизация и безопасность зданий
- Низковольтная коммутационная техника
- Технология безопасности
- Системные решения и продукты для отраслей
- Сервис
- Приводная техника
dv/dt filters plus VPL
- Заказные данные (12)
- Информационные материалы
Информационные материалы
dv/dt filter plus VPL (Voltage Peak Limiter) limit the voltage rate-of-rise dv/dt to values < 500 V/μs and the typical voltage peaks to the following values in accordance with the limit value curve according to IEC/TS 60034‑17: 2006:
< 1000 V at Uline < 575 V
< 1250 V at 660 V < Uline < 690 V
Standard motors with standard insulation and without insulated bearings with a supply voltage of up to 690 V can be used for converter operation if a dv/dt filter plus VPL is used.
dv/dt filters plus VPL are designed for the following maximum motor cable lengths:
- Shielded cables: 300 m (984 ft) (e.g. Protodur NYCWY)
- Unshielded cables: 450 m (1476 ft) (e.g. Protodur NYY)
For shorter cable lengths (100 m (328 ft) shielded, 150 m (492 ft) unshielded), see also dv/dt filter compact plus VPL.
Notice:
The maximum permissible cable length between the dv/dt filter plus VPL and the Power Module/Motor Module is 5 m (16.4 ft).
Дизайн
The dv/dt filter plus VPL consists of two components, which are also supplied as separate mechanical units:
- dv/dt reactor
- Voltage limiting network, which cuts off the voltage peaks and feeds the energy back to the DC link.
Технические данные
Line voltage 380 ... 480 V 3 AC
dv/dt filter plus VPL
6SL3000-2DE32-6AA0
6SL3000-2DE35-0AA0
6SL3000-2DE38-4AA0
6SL3000-2DE41-4AA0
Ith max
A
260
490
840
1405
Degree of protection
IP00
IP00
IP00
IP00
Cable length, max.
between dv/dt filter and motor 1)
- Shielded
m (ft)
300 (984)
300 (984)
300 (984)
300 (984)
- Unshielded
m (ft)
450 (1476)
450 (1476)
450 (1476)
450 (1476)
Conformity
CE
CE
CE
CE
Certificate of suitability
cURus
cURus
cURus
cURus
dv/dt reactor
Power loss, max. 2)
- At 50 Hz 400 V
kW
0.701
0.874
1.106
1.111
- At 60 Hz 460 V
kW
0.729
0.904
1.115
1.154
- At 150 Hz 400 V
kW
0.78
0.963
1.226
1.23
Connections
- To the Power Module/ Motor Module
1 × hole for M10
1 × hole for M12
1 × hole for M12
2 × hole for M12
- To load
1 × hole for M10
1 × hole for M12
1 × hole for M12
2 × hole for M12
- PE
M6 screw
M6 screw
M6 screw
M6 screw
Dimensions
- Width
mm (in)
410 (16.1)
460 (18.1)
460 (18.1)
445 (17.5)
- Height
mm (in)
370 (14.6)
370 (14.6)
385 (15.2)
385 (15.2)
- Depth
mm (in)
229 (9.02)
275 (10.8)
312 (12.3)
312 (12.3)
Weight, approx.
kg (lb)
66 (146)
122 (269)
149 (329)
158 (348)
Voltage Peak Limiter (VPL)
Power loss, max.
- At 50 Hz 400 V
kW
0.029
0.042
0.077
0.134
- At 60 Hz 460 V
kW
0.027
0.039
0.072
0.125
- At 150 Hz 400 V
kW
0.025
0.036
0.066
0.114
Connections
- To dv/dt reactor
M8 nut
70 mm2 terminals
1 × hole for M8
1 × hole for M10
- To DC link
M8 nut
70 mm2 terminals
1 × hole for M8
1 × hole for M10
- PE
M8 stud
35 mm2 terminals
M8 stud
M8 stud
Dimensions
- Width
mm (in)
265 (10.4)
392 (15.4)
309 (12.2)
309 (12.2)
- Height
mm (in)
263 (10.3)
285 (11.2)
1313 (51.7)
1313 (51.7)
- Depth
mm (in)
190 (7.48)
210 (8.27)
400 (15.7)
400 (15.7)
Weight, approx.
kg (lb)
6 (13)
16 (35)
48 (106)
72 (159)
Suitable for Power Module
(Type rating)
6SL3310-1TE32-1AA3 (110 kW)
6SL3315-1TE32-1AA3 (110 kW)
6SL3310-1TE32-6AA3 (132 kW)
6SL3315-1TE32-6AA3 (132 kW)
6SL3310-1TE33-1AA3 (160 kW)
6SL3315-1TE33-1AA3 (160 kW)
6SL3310-1TE33-8AA3 (200 kW)
6SL3310-1TE35-0AA3 (250 kW)
6SL3315-1TE35-0AA3 (250 kW)
–
–
Suitable for Motor Module
(Type rating)
6SL3320-1TE32-1AA3 (110 kW)
6SL3325-1TE32-1AA3 (110 kW)
6SL3320-1TE32-6AA3 (132 kW)
6SL3325-1TE32-6AA3 (132 kW)
6SL3320-1TE33-1AA3 (160 kW)
6SL3325-1TE33-1AA3 (160 kW)
6SL3320-1TE33-8AA3 (200 kW)
6SL3320-1TE35-0AA3 (250 kW)
6SL3325-1TE35-0AA3 (250 kW)
6SL3320-1TE36-1AA3 (315 kW)
6SL3325-1TE36-1AA0 (315 kW)
6SL3320-1TE37-5AA0 (400 kW)
6SL3325-1TE37-5AA0 (400 kW)
6SL3320-1TE38-4AA0 (450 kW)
6SL3325-1TE38-4AA0 (450 kW)
6SL3320-1TE41-0AA3 (560 kW)
6SL3325-1TE41-0AA3 (560 kW)
6SL3320-1TE41-2AA3 (710 kW)
6SL3325-1TE41-2AA3 (710 kW)
6SL3320-1TE41-4AA3 (800 kW)
6SL3325-1TE41-4AA3 (800 kW)
6SL3325-1TE41-4AS3 (800 kW) 2)
1) Longer cable lengths for specific configurations are available on request.
2) This Motor Module has been specifically designed for loads demanding a high dynamic performance.
Note:
For powers above 560 kW (380 ... 480 V) or 710 kW (500 ... 690 V), then a filter contains two dv/dt reactors.
The technical specifications listed refer to a dv/dt reactor.
For additional information on dv/dt filters, please refer to the SINAMICS Low Voltage Engineering Manual.Line voltage 500 ... 690 V 3 AC
dv/dt filter plus VPL
6SL3000-2DH31-0AA0
6SL3000-2DH31-5AA0
6SL3000-2DH32-2AA0
6SL3000-2DH33-3AA0
Ith max
A
100
150
215
330
Degree of protection
IP00
IP00
IP00
IP00
Cable length, max.
between dv/dt filter and motor 1)
- Shielded
m (ft)
300 (984)
300 (984)
300 (984)
300 (984)
- Unshielded
m (ft)
450 (1476)
450 (1476)
450 (1476)
450 (1476)
Conformity
CE
CE
CE
CE
Certificate of suitability 2)
cURus
cURus
cURus
cURus
dv/dt reactor
Power loss, max.
- At 50 Hz 500/690 V
kW
0.49
0.389
0.578
0.595
- At 60 Hz 575 V
kW
0.508
0.408
0.604
0.62
- At 150 Hz 500/690 V
kW
0.541
0.436
0.645
0.661
Connections
- To the Power Module/ Motor Module
1 × hole for M10
1 × hole for M10
1 × hole for M10
1 × hole for M10
- To load
1 × hole for M10
1 × hole for M10
1 × hole for M10
1 × hole for M10
- PE
M6 screw
M6 screw
M6 screw
M6 screw
Dimensions
- Width
mm (in)
350 (13.8)
350 (13.8)
460 (18.1)
460 (18.1)
- Height
mm (in)
320 (12.6)
320 (12.6)
360 (14.2)
360 (14.2)
- Depth
mm (in)
227 (8.94)
227 (8.94)
275 (10.8)
275 (10.8)
Weight, approx.
kg (lb)
48 (106)
50 (110)
83 (183)
135 (298)
Voltage Peak Limiter (VPL)
Power loss, max.
- At 50 Hz 500/690 V
kW
0.016
0.02
0.032
0.042
- At 60 Hz 575 V
kW
0.015
0.019
0.03
0.039
- At 150 Hz 500/690 V
kW
0.013
0.018
0.027
0.036
Connections
- To dv/dt reactor
M8 nut
M8 nut
70 mm2 terminals
70 mm2 terminals
- To DC link
M8 nut
M8 nut
70 mm2 terminals
70 mm2 terminals
- PE
M8 stud
M8 stud
35 mm2 terminals
35 mm2 terminals
Dimensions
- Width
mm (in)
263 (10.3)
263 (10.3)
392 (15.4)
392 (15.4)
- Height
mm (in)
265 (10.4)
265 (10.4)
285 (11.2)
285 (11.2)
- Depth
mm (in)
188 (7.40)
188 (7.40)
210 (8.27)
210 (8.27)
Weight, approx.
kg (lb)
6 (13)
6 (13)
16 (35)
16 (35)
Suitable for Motor Module
(Type rating)
6SL3320-1TG28-5AA3 (75 kW)
6SL3320-1TG31-0AA3 (90 kW)
6SL3325-1TG31-0AA3 (90 kW)
6SL3320-1TG31-2AA3 (110 kW)
6SL3320-1TG31-5AA3 (132 kW)
6SL3325-1TG31-5AA3 (132 kW)
6SL3320-1TG31-8AA3 (160 kW)
6SL3320-1TG32-2AA3 (200 kW)
6SL3325-1TG32-2AA3 (200 kW)
6SL3320-1TG32-6AA3 (250 kW)
6SL3320-1TG33-3AA3 (315 kW)
6SL3325-1TG33-3AA3 (315 kW)
1) Longer cable lengths for specific configurations are available on request.
2) Only for line voltages 500 ... 600 V 3 AC.
Note:
For powers above 560 kW (380 ... 480 V) or 710 kW (500 ... 690 V), then a filter contains two dv/dt reactors.
The technical specifications listed refer to a dv/dt reactor.
For additional information on dv/dt filters, please refer to the SINAMICS Low Voltage Engineering Manual.Line voltage 500 ... 690 V 3 AC
dv/dt filter plus VPL
6SL3000-2DH34-1AA0
6SL3000-2DH35-8AA0
6SL3000-2DH38-1AA0
6SL3000-2DH41-4AA0
Ith max
A
410
575
810
1270
Degree of protection
IP00
IP00
IP00
IP00
Cable length, max.
between dv/dt filter and motor 1)
- Shielded
m (ft)
300 (984)
300 (984)
300 (984)
300 (984)
- Unshielded
m (ft)
450 (1476)
450 (1476)
450 (1476)
450 (1476)
Conformity
CE
CE
CE
CE
Certificate of suitability 2)
cURus
cURus
cURus
cURus
dv/dt reactor
Power loss, max.
- At 50 Hz 500/690 V
kW
0.786
0.862
0.828
0.865
- At 60 Hz 575 V
kW
0.826
0.902
0.867
0.904
- At 150 Hz 500/690 V
kW
0.884
0.964
0.927
0.966
Connections
- To the Power Module/ Motor Module
1 × hole for M12
1 × hole for M12
2 × hole for M12
2 × hole for M12
- To load
1 × hole for M12
1 × hole for M12
2 × hole for M12
2 × hole for M12
- PE
M6 screw
M6 screw
M6 screw
M6 screw
Dimensions
- Width
mm (in)
460 (18.1)
460 (18.1)
445 (17.5)
445 (17.5)
- Height
mm (in)
385 (15.2)
385 (15.2)
385 (15.2)
385 (15.2)
- Depth
mm (in)
312 (12.3)
312 (12.3)
312 (12.3)
312 (12.3)
Weight, approx.
kg (lb)
147 (324)
172 (379)
160 (353)
164 (362)
Voltage Peak Limiter (VPL)
Power loss, max.
- At 50 Hz 500/690 V
kW
0.051
0.063
0.106
0.15
- At 60 Hz 575 V
kW
0.048
0.059
0.1
0.14
- At 150 Hz 500/690 V
kW
0.043
0.054
0.091
0.128
Connections
- To dv/dt reactor
1 × hole for M8
1 × hole for M8
1 × hole for M10
1 × hole for M10
- To DC link
1 × hole for M8
1 × hole for M8
1 × hole for M10
1 × hole for M10
- PE
M8 stud
M8 stud
M8 stud
M8 stud
Dimensions
- Width
mm (in)
309 (12.2)
309 (12.2)
309 (12.2)
309 (12.2)
- Height
mm (in)
1313 (51.7)
1313 (51.7)
1313 (51.7)
1313 (51.7)
- Depth
mm (in)
400 (15.7)
400 (15.7)
400 (15.7)
400 (15.7)
Weight, approx.
kg (lb)
48 (106)
48 (106)
72 (159)
73 (161)
Suitable for Motor Module
(Type rating)
6SL3320-1TG34-1AA3 (400 kW)
6SL3320-1TG34-7AA3 (450 kW)
6SL3325-1TG34-7AA3 (450 kW)
6SL3320-1TG35-8AA3 (560 kW)
6SL3325-1TG35-8AA3 (560 kW)
6SL3320-1TG37-4AA3 (710 kW)
6SL3325-1TG37-4AA3 (710 kW)
6SL3320-1TG38-1AA3 (800 kW)
6SL3325-1TG38-0AA3 (800 kW)
6SL3325-1TG38-1AA3 (800 kW)
6SL3320-1TG38-8AA3 (900 kW)
6SL3320-1TG41-0AA3 (1000 kW)
6SL3325-1TG41-0AA3 (1000 kW)
6SL3320-1TG41-3AA3 (1200 kW)
6SL3325-1TG41-3AA3 (1200 kW)
1) Longer cable lengths for specific configurations are available on request.
2) Only for line voltages 500 ... 600 V 3 AC.
Note:
For powers above 560 kW (380 ... 480 V) or 710 kW (500 ... 690 V), then a filter contains two dv/dt reactors.
The technical specifications listed refer to a dv/dt reactor.
For additional information on dv/dt filters, please refer to the SINAMICS Low Voltage Engineering Manual.