- Каталог оборудования Siemens
- Каталог продуктов Siemens Industry
- Приводная техника
- Техника автоматизации
- Energy
- Автоматизация и безопасность зданий
- Низковольтная коммутационная техника
- Технология безопасности
- Системные решения и продукты для отраслей
- Автомобильная промышленность
- Биотопливо
- Химическая промышленность
- Пищевая промышленность
- Производственные машины
- Packaging machines
- Printing presses
- Textile machines
- Converting
- Metal forming technology
- Handling systems
- Непрерывное преобразование листового материала - Converting
- Печать
- Манипуляторы
- Пластик
- Текстиль
- Обработка металлов давлением
- Упаковка
- Компоненты автоматизации для станков
- SINUMERIK 808 with SINAMICS V60/V70
- SINUMERIK 828 with SINAMICS S120
- Introduction SINUMERIK 828 with SINAMICS S120
- Обзор функций SINUMERIK 828D с SINAMICS S120 Combi
- SINUMERIK CNC controls
- SINAMICS S120 drive system
- SINAMICS S120 Combi Power Modules
- External fan module, reinforcement plates
- Line reactors
- Line filters
- SINAMICS S120 booksize compact format
- SINAMICS S120 in booksize format
- Smart Line Modules in booksize format
- Line reactors for Smart Line Modules
- Line filters for Smart Line Modules
- Recommended line-side components for Smart Line Modules
- Active Line Modules in booksize format
- Active Interface Modules in booksize format
- Line filters
- Basic Line Filters for Active Line Modules
- Recommended line-side components for Active Line Modules
- Basic Line Modules in booksize format
- Line reactors for Basic Line Modules
- Line filters for Basic Line Modules
- Recommended line-side components for Basic Line Modules
- Single Motor Modules in booksize format
- Double Motor Modules in booksize formats
- Series motor reactors
- Series motor reactors
- Braking Module in booksize format
- Braking resistors for booksize format
- Capacitor Module in booksize format
- Control Supply Module in booksize format
- DC link adapters for booksize and booksize compact formats
- DMC20 DRIVE-CLiQ Hub Module
- DME20 DRIVE-CLiQ Hub Module
- TM54F Terminal Module
- SMC20 Sensor Module Cabinet-Mounted
- SMC30 Sensor Module Cabinet-Mounted
- SMC40 Sensor Module Cabinet-Mounted
- SME120/SME125 Sensor Modules External
- SIMOTICS motors
- Motion Control Encoder measuring systems
- MOTION-CONNECT connection systems
- Services and training
- SINUMERIK Solution Partners
- Certificates of suitability (approvals)
- ЧПУ SINUMERIK 828
- Glossary SINAMICS S120 drive system
- List of abbreviations
- SINUMERIK 840 with SINAMICS S120
- Приводные применения
- Горная и металлургическая промышленность
- Нефтегазовая промышленность
- Фармацевтическая промышленность
- Бумажная промышленность
- Солнечная энергетика
- Транспорт, инфраструктура, логистика
- Вода и водоподготовка
- Сбыт электроэнергии
- Возобновляемые источники энергии
- Отраслевые решения
- Отраслевые продукты
- Сервис
Series motor reactors
- Информационные материалы
Информационные материалы
A series reactor in the form of a three-limb iron-cored reactor may be required in the case of special motors with minimal leakage inductance (for which the controller settings are insufficient). Motors with a low leakage inductance are, from experience, motors that can achieve high stator frequencies > 300 Hz or motors with a high rated current > 85 A.
The series motor reactors are designed for a pulse frequency of 4 kHz or 8 kHz output from the Motor Module. Higher pulse frequencies are not permissible.
The series motor reactor must be installed as close as possible to the Motor Module.
The voltage drop across a series reactor depends on the motor current and the motor frequency. If an unregulated infeed is used, the maximum rated motor voltage depends on the line supply voltage available. If these guide values are observed, lower reductions in power in the upper speed range of the motor can be achieved.
The surface temperature of the series motor reactor can reach up to 100 °C (212 °F). This additional heat source must be taken into account in the system.
The notes in the Configuration Manual for the motors used must be observed.
Технические данные
Input voltage 380 ... 480 V 3 AC
(DC link voltage 510 ... 720 V DC)Series motor reactor
4EU2552-0EF00-4BA0
4EU3951-0AR00-4B
Rated current
A
22.5
108
Rated inductance
mH
0.3
0.1
Power loss
kW
0.146
0.454
Continuous current Ithmax, therm. perm.
A
25
120
Continuous frequency, therm. perm.
Hz
1400
1400
Pulse frequency, max.
kHz
8
8
Relative voltage drop at the series motor reactor
At Ithmax and Vrated
%
23
38
Ambient temperature
°C (°F)
40 (104)
40 (104)
Connection to Motor Module/motor
Flat-type terminal
Flat-type terminal
PE connection
M6 screw
M8 screw
Degree of protection
IP00
IP00
Dimensions
- Width
mm (in)
225 (8.86)
410 (16.14)
- Height
mm (in)
210 (8.27)
385 (15.16)
- Depth
mm (in)
115 (4.53)
174 (6.85)
Weight, approx.
kg (lb)
16 (35.3)
68 (150)
Approvals, according to
cURus
cURus
Suitable for Motor Module in booksize format
Type
6SL3120-...
6SL3121-...6SL3120-...
6SL3121-...