SMC20 Sensor Module Cabinet-Mounted

• Заказные данные
  (1)
• Аксессуары
  (1)
• Информационные материалы

  Информационные материалы

  

  SMC20 Sensor Module Cabinet-Mounted

  The SMC20 Sensor Module Cabinet-Mounted is required to evaluate the encoder signals of motors without a DRIVE‑CLiQ interface. External encoders can also be connected via the SMC20.

  The following encoder signals can be evaluated:

  • Incremental encoder sin/cos 1 V_pp
  • Absolute encoder EnDat 2.1
  • SSI encoder with incremental signals sin/cos 1 V_pp (firmware version 2.4 and later)

  The motor temperature can also be sensed using a PTC thermistor KTY84‑130, Pt1000 or PTC.

  Дизайн

  The SMC20 Sensor Module Cabinet-Mounted features the following connections and interfaces as standard:

  • 1 encoder connection including motor temperature sensing (KTY84‑130, Pt1000 or PTC) via SUB‑D connector
  • 1 DRIVE-CLiQ interface
  • 1 connection for the electronics power supply via the 24 V DC supply connector
  • 1 PE (protective earth) connection

  The status of the SMC20 Sensor Module Cabinet-Mounted is indicated via a multi-color LED.

  The SMC20 Sensor Module Cabinet-Mounted can be snapped onto a TH 35 standard mounting rail according to EN 60715 (IEC 60715).

  The signal cable shield is connected via the encoder system connector and can also be connected to the SMC20 Sensor Module Cabinet-Mounted via a shield connection terminal, e.g. Phoenix Contact type SK8 or Weidmüller type KLBÜ CO 1. The shield connection terminal must not be used as a strain relief mechanism.

  Интеграция

  SMC20 Sensor Modules Cabinet-Mounted communicate with a Control Unit via DRIVE-CLiQ.

  Технические данные

  	SMC20 Sensor Module Cabinet‑Mounted 6SL3055-0AA00-5BA3
  Current requirement, max. at 24 V DC, without taking encoder into account	0.2 A
  Conductor cross-section, max.	2.5 mm2
  Fuse protection, max.	20 A
  Power loss, max.	10 W
  Encoders which can be evaluated	Incremental encoder sin/cos 1 Vpp Absolute encoder EnDat 2.1 SSI encoder with incremental signals sin/cos 1 Vpp (firmware version 2.4 and later)
  Encoder supply	5 V DC/0.35 A
  Encoder frequency incremental signals, max.	500 kHz
  Signal subdivision (interpolation), max.	16384 times (14 bits)
  SSI baud rate	100 ... 1000 kBaud
  Cable length to encoder, max.	100 m (328 ft)
  PE connection	M4 screw
  Dimensions
  Width	30 mm (1.18 in)
  Height	150 mm (5.91 in)
  Depth	111 mm (4.37 in)
  Weight, approx.	0.45 kg (0.99 lb)
  Certificate of suitability	cULus