DMC20 DRIVE-CLiQ Hub Module

• Заказные данные
  (1)
• Аксессуары
  (1)
• Информационные материалы

  Информационные материалы

  

  DMC20 DRIVE-CLiQ Hub Module

  The DMC20 DRIVE-CLiQ Hub Module is used to implement a star-shaped topology of a DRIVE‑CLiQ line. Two DMC20 DRIVE‑CLiQ Hub Modules can be connected in series (cascaded).

  Дизайн

  The DMC20 DRIVE‑CLiQ Hub Module in degree of protection IP20 is designed for mounting in control cabinets.

  The following are located on the DMC20 DRIVE-CLiQ Hub Module:

  • 6 DRIVE‑CLiQ sockets for connecting 5 DRIVE-CLiQ devices
  • 1 connection for the electronics power supply via the 24 V DC supply connector

  The status of the DMC20 DRIVE-CLiQ Hub Module is indicated via a multi-color LED.

  The DMC20 DRIVE-CLiQ Hub Module can be snapped onto a TH 35 standard mounting rail in accordance with EN 60715 (IEC 60715).

  Интеграция

  Signals from more than one encoder can be collected with one DRIVE-CLiQ Hub Module and forwarded to the Control Unit through a single DRIVE-CLiQ cable.

  

  With a DRIVE‑CLiQ Hub Module, individual DRIVE‑CLiQ nodes can be removed without interrupting the data exchange with the remaining devices in the DRIVE‑CLiQ line.

  

  Технические данные

  	DMC20 DRIVE-CLiQ Hub Module 6SL3055-0AA00-6AA1
  Current requirement, max. at 24 V DC without DRIVE‑CLiQ supply	0.15 A
  Conductor cross-section, max.	2.5 mm2
  Degree of protection	IP20
  Dimensions
  Width	30 mm (1.18 in)
  Height	151 mm (5.94 in)
  Depth	110 mm (4.33 in)
  Weight, approx.	0.36 kg (0.79 lb)
  Certificate of suitability	cULus