SMC40 Sensor Module Cabinet-Mounted

• Заказные данные
  (1)
• Информационные материалы

  Информационные материалы

  

  SMC40 Sensor Module Cabinet-Mounted

  The SMC40 Sensor Module Cabinet-Mounted is required to evaluate the encoder signals of motors without a DRIVE-CLiQ interface. External encoders can also be connected via the SMC40.

  The following encoder signals can be evaluated:

  • Absolute encoder EnDat 2.2

  Дизайн

  The SMC40 Sensor Module Cabinet-Mounted features the following connections and interfaces as standard:

  • 2 encoder system interfaces
  • 2 DRIVE‑CLiQ interfaces
  • 1 connection for the electronics power supply via the 24 V DC supply connector
  • 1 PE (protective earth) connection

  The status of the SMC40 Sensor Module Cabinet-Mounted is indicated via a multi-color LED.

  The SMC40 Sensor Module Cabinet-Mounted can be snapped onto a TH 35 standard mounting rail in accordance with EN 60715 (IEC 60715).

  The maximum encoder cable length between SMC40 modules and encoder systems is 100 m (328 ft). The specified supply voltage of the encoder must be observed. The maximum cable length for DRIVE-CLiQ cables is 30 m (98 ft).

  The signal cable shield can be connected to the SMC40 Sensor Module Cabinet‑Mounted via a shield connection terminal, e.g., Phoenix Contact type SK8 or Weidmüller type KLBÜ CO 1. The shield connection terminal must not be used for strain relief.

  Интеграция

  SMC40 Sensor Modules Cabinet-Mounted communicate with a Control Unit via DRIVE‑CLiQ.

  Технические данные

  	SMC40 Sensor Module Cabinet‑Mounted 6SL3055-0AA00-5DA0
  Current requirement, max. At 24 V DC, not taking encoder into account	0.1 A
  Conductor cross-section, max.	2.5 mm2
  Fuse protection, max.	20 A
  Power loss, max.	4 W
  Encoders which can be evaluated	Absolute encoder EnDat 2.2
  PE connection	M4 screw
  Dimensions
  Width	30 mm (1.18 in)
  Height	150 mm (5.91 in)
  Depth	111 mm (4.37 in)
  Weight, approx.	0.45 kg (0.99 lb)
  Certificate of suitability	cULus