External fan module, reinforcement plates

• Заказные данные
  (1)
• Аксессуары
  (1)
• Информационные материалы

  Информационные материалы

  External fan module

  The external fan module combined with the reinforcement plates is employed to provide perfect cooling of a SINAMICS S120 Combi Power Module.

  To cool the SINAMICS S120 Combi Power Module, a volumetric flow of air of at least 160 m³/h through the heatsink is required.

  The external fan module supplies a maximum volumetric flow of 290 m³/h. This dimensioning ensures an adequate air flow rate, even with a lower supply voltage or with a slightly soiled heatsink.

  Due to the encapsulated electronics and the ball-bearing-mounted closed rotor, the fan module can be used even under exacting environmental conditions. The fans are equipped with electronic reverse-polarity, blocking and overload protection systems. To ensure maximum machine availability, the fan speed is monitored. A user alarm is displayed if the fan stops.

  Reinforcement plates

  

  It is essential to ensure that the air actually flows through the heatsink. The gap between the fan module and heatsink must therefore be closed. The reinforcement plates must be used for this purpose where possible. The reinforcement plates

  • close the gap between the fan module and heatsink
  • reinforce the rear wall of the control cabinet for sealed installation
  • guarantee ideal ventilation spaces

  Технические данные

  Article No.	6SL3161-0EP00-0AA0
  Product name	External fan module
  Rated voltage DC	24 V
  Voltage range DC	20.4 … 28.8 V
  Volumetric flow, max.	290 m3/h (10241 ft3/h)
  Current consumption	0.8 A
  Power consumption	18 W
  Ambient temperature, max.	-20 ... +70 °C (-4 ... +158 °F)
  Service life
  At 55 °C (131 °F)	50000 h
  At 70 °C (158 °F)	20000 h
  Degree of protection	IP54
  Height	258 mm (10.16 in)
  Width	104 mm (4.09 in)
  Depth	86 mm (3.39 in)
  Net weight	1.5 kg (3.31 lb)
  Certificate of suitability	CSA, UL, VDE

  
  
  

  Article No.	6SL3161-1LP00-0AA0
  Product name	Reinforcement plate
  Height	575 mm (22.64 in)
  Width	15 mm (0.59 in)
  Depth	75 mm (2.95 in)
  Net weight	0.75 kg (1.65 lb)