SIPLUS S7-400 CP 443-1

Заказные данные
(1)
Аксессуары
(14)

Communications processor for connecting a SIMATIC S7-400 to Industrial Ethernet networks, also as PROFINET IO controller or in SIMATIC H systems.

The CP supports:

PG/OP communication
S7 communication
Open communication (SEND/RECEIVE)
PROFINET communication
IT communication

The communications processor can also be used for redundant S7 communication in SIMATIC H systems and for fail-safe applications (PROFIsafe) in connection with an S7-400 F-CPU.

Note:

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme specific information was added.

SIPLUS CP 443-1
Article No.	6AG1 443-1EX30-4XE0
Order number based on	6GK7 443-1EX30-0XE0
Ambient temperature range	0 ... +60 °C
Conformal coating	Coating of the printed circuit boards and the electronic components
Technical data	The technical data of the standard product applies, except for the ambient conditions
Ambient conditions
Relative humidity	100%, condensation/frost permissible. No commissioning if condensation present.
Biologically active substances, compliance with EN 60721-3-3	Class 3B2 mold spores, fungal spores (excluding fauna). The supplied plug covers must remain in place over the unused interfaces during operation!
Chemically active substances, compliance with EN 60721-3-3	Class 3C4 incl. salt spray in accordance with EN60068-2-52 (degree of severity 3). The supplied plug covers must remain in place over the unused interfaces during operation!
Mechanically active substances, compliance with EN 60721-3-3	Class 3S4 incl. sand, dust. The supplied plug covers must remain in place over the unused interfaces during operation!
Air pressure (depending on the highest positive temperature range specified)	1080 ... 795 hPa (-1000 ... +2000 m) see ambient temperature range 795 ... 658 hPa (+2000 ... +3500 m) derating 10 K 658 ... 540 hPa (+3500 ... +5000 m) derating 20 K

Technical documentation on SIPLUS can be found here:
http://www.siemens.com/siplus-extreme

Область применения

The CP 443-1 is used to connect the SIMATIC S7-400 to Industrial Ethernet networks. With its own processor, it relieves the CPU of communications tasks and facilitates additional connections.

The CP 443-1 offers communication options with

PGs/PCs
Host computers
HMI systems
SIMATIC S5/S7/C7 systems
PROFINET IO devices

Дизайн

The CP 443-1 features all the advantages of the SIMATIC S7-400 design:

Compact design:
- Two RJ45 sockets for connecting to Industrial Ethernet; automatic data rate detection by means of the autosensing/autocrossover function; the connection is made via the IE FC RJ45 Plug 180 with 180° cable outlet or via a standard patch cable
- Diagnostics LEDs for indicating the operational and communication status
Easy installation:
The CP 443-1 is mounted on the S7-400 rack and connected to the other modules via the backplane bus. No slot rules apply.
The CP 443-1 can be operated without a fan
The CP 443-1 can also be operated in the expansion rack (ER) in conjunction with the IM 460/461
The module can be replaced without the need for a programming device

Функции

Two RJ45 ports with 10/100 Mbps full/half duplex with autosensing and autocrossover functionality via integrated 2-port switch
Communication services of the interface:
- Open communication (TCP/IP and UDP): Multicast with UDP, including routing between both interfaces
- PG/OP communication: Inter-network with S7 routing
- S7 communication (client, server, multiplexing) including routing between both interfaces
- S7 H communication for S7-400 H systems, now also across network boundaries (ISO-on-TCP)
- Certified PROFINET IO controller with real-time properties (RT and IRT)
- IP address assignment via DHCP, simple PC tool or via program block (e.g. for HMI)
Media redundancy (MRP):
- Within an Ethernet network with ring topology, the CP supports the media redundancy procedure MRPMRP as an MRP Manager and as an MRP Client
Diagnostics and network management:
- Comprehensive diagnostics functions for all modules in the rack (including graphical diagnostics, e.g. topology)
- Integration in network management systems due to support of SNMP V1/V3
Security mechanisms:
- Access protection by means of configurable IP access list
- Secure firmware update
- Plagiarism detection
- Certification as per the Achilles Level II Standard
  http://www.wurldtech.com/product_services/certifications/certified_products/
Configuration of all functions with STEP 7 V5.5 SP2;
configuration with STEP 7 Professional V11 only with a limited range of functions of the predecessor CP 443-1 (6GK7 443-1EX20-0XE0) possible
When using the blocks AG_SSEND (FC53), AG_SRECV (FC63), TSEND (FB63), TRCV (FB64), TCON (FB65) and TDISCON (FB66), please note the following information: http://support.automation.siemens.com/WW/view/en/60037071
Module replacement without programming device: All information can be stored on the CPU

Интеграция

Interfacing to higher-level network with CP 443-1 as PROFINET IO controller

Line structure as PROFINET IO controller with integrated real-time switch

Line structure at the superordinated control level through integrated 2-port switch

Особенности

High plant availability through the support of media redundancy (MRP) and use in the SIMATIC S7-400 H system
Optimum support of maintenance through
- Web-based diagnostics
- Remote programming via WAN or a telephone network (ISDN)
- Monitoring by means of IT network management tools (SNMP)
- Module exchange without programming device using the C-PLUG swap medium
Securing the system against unauthorized access by means of
- Central access protection for any devices within an automation cell, e.g. by means of authentication of the network stations
The capability of later connecting existing SIMATIC S7 systems to Industrial Ethernet using the CP 443-1 ensures investment protection

Технические данные

Order number		6GK7443-1EX30-0XE0
Product type designation		CP 443-1
Transmission rate
Transfer rate
● at the 1st interface		10 ... 100 Mbit/s
Interfaces
Number of interfaces acc. to Industrial Ethernet		2
Number of electrical connections
● at the 1st interface acc. to Industrial Ethernet		2
Type of electrical connection
● at the 1st interface acc. to Industrial Ethernet		RJ45 port
design of the removable storage C-PLUG		No
Supply voltage, current consumption, power loss
Type of voltage of the supply voltage		DC
Supply voltage 1 from backplane bus		5 V
Relative symmetrical tolerance at DC
● at 5 V		5 %
Consumed current
● from backplane bus at DC at 5 V typical		1.4 A
Power loss [W]		7.25 W
Permitted ambient conditions
Ambient temperature
● during operation		0 ... 60 °C
● during storage		-40 ... +70 °C
● during transport		-40 ... +70 °C
Relative humidity at 25 °C without condensation during operation maximum		95 %
Protection class IP		IP20
Design, dimensions and weight
Module format		Compact module S7-400 single width
Width		25 mm
Height		290 mm
Depth		210 mm
Net weight		0.7 kg
Product properties, functions, components general
Number of units
● per CPU maximum		14
● Note		max. 4 as PN IO ctrl.
Performance data open communication
Number of possible connections for open communication by means of SEND/RECEIVE blocks maximum		64
Amount of data
● as user data per ISO connection for open communication by means of SEND/RECEIVE blocks maximum		8 Kibyte
● as user data per ISO on TCP connection for open communication by means of SEND/RECEIVE blocks maximum		8 Kibyte
● as user data per TCP connection for open communication by means of SEND/RECEIVE blocks maximum		8 Kibyte
● as user data per UDP connection for open IE communication by means of SEND/RECEIVE blocks maximum		2 Kibyte
Number of possible connections for open communication
● by means of T blocks maximum		64
Amount of data
● as user data per ISO on TCP connection for open communication by means of T blocks maximum		1 452 byte
Performance data S7 communication
Number of possible connections for S7 communication
● maximum		128
● with PG connections maximum		2
● Note		when using several CPUs
Performance data multi-protocol mode
Number of active connections with multi-protocol mode		128
Performance data PROFINET communication as PN IO-Controller
Product function PROFINET IO controller		Yes
Number of PN IO devices on PROFINET IO controller usable total		128
Number of PN IO IRT devices on PROFINET IO controller usable		64
Number of external PN IO lines with PROFINET per rack		4
Amount of data
● as user data for input variables as PROFINET IO controller maximum		4 Kibyte
● as user data for input variables as PROFINET IO controller maximum		4 Kibyte
● as user data for input variables per PN IO device as PROFINET IO controller maximum		1 433 byte
● as user data for output variables per PN IO device as PROFINET IO controller maximum		1 433 byte
● as user data for input variables per PN IO device for each sub-module as PROFINET IO controller maximum		240 byte
● as user data for output variables per PN IO device for each sub-module as PROFINET IO controller maximum		240 byte
Product function MIB support		Yes
Protocol is supported
● SNMP v1		Yes
● DCP		Yes
● LLDP		Yes
Configuration software
● required		STEP 7 V5.5 SP3 or higher / STEP 7 Professional V12 (TIA Portal) or higher
Product functions Diagnosis
Product function Web-based diagnostics		Yes
Product functions switch
Product feature Switch		Yes
Product function
● switch-managed		No
● with IRT PROFINET IO switch		Yes
● Configuration with STEP 7		Yes
Product functions Redundancy
Product function
● Ring redundancy		Yes
● Redundancy manager		Yes
● Parallel Redundancy Protocol (PRP)/operation in the PRP-network		Yes
Protocol is supported Media Redundancy Protocol (MRP)		Yes
Product functions Security
Product function
● password protection for Web applications		No
● ACL - IP-based		Yes
● ACL - IP-based for PLC/routing		No
● switch-off of non-required services		Yes
● Blocking of communication via physical ports		Yes
● log file for unauthorized access		No
Product functions Time
Product function SICLOCK support		Yes
Product function pass on time synchronization		Yes
Protocol is supported
● NTP		Yes