Supplementary system components

• Заказные данные
  (70)
• Информационные материалы

  Дополнительно

  Intelligent Operator Panel IOP Handheld

  

  IOP Handheld for mobile use

  The Intelligent Operator Panel IOP Handheld is a very user-friendly and powerful operator panel for commissioning and diagnostics as well as local operator control and monitoring of SINAMICS G110D, SINAMICS G120D and SINAMICS G110M distributed inverters.

  The IOP supports both entry-level personnel and drive experts. Thanks to the large plain text display, the menu-based operation and the application wizards, it is easy to commission standard drives. A drive can be essentially commissioned without having to use a printed parameter list – as the parameters are displayed in plain text, and explanatory help texts and a parameter filtering function are provided.

  Application wizards interactively guide you when commissioning important applications such as conveyor technology, pumps, fans and compressors.

  There is a basic commissioning wizard for general commissioning.

  The drives are easily controlled manually using directly assigned buttons and the navigation wheel. The IOP Handheld has a dedicated switchover button to switch over from automatic to manual mode.

  The inverter can be diagnosed in a user-friendly fashion using the plain text display of faults and alarms. Help texts can be obtained by pressing the INFO button.

  Up to two process values can be graphically visualized and up to four process values can be numerically visualized on the status screen/display.

  Process values can also be displayed in technological units.

  The IOP Handheld supports standard commissioning of identical drives. For this purpose, a parameter list can be copied from an inverter into the IOP Handheld and when required, downloaded into other drive units of the same type.

  The IOP supports the following languages ¹⁾: German, English, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Czech, Polish, Turkish, Finnish.

  In addition to the IOP, the IOP Handheld includes a housing with the rechargeable batteries, charging unit and RS232 connecting cable. The charging unit is supplied with connector adapters for Europe, the US and UK. When the batteries are fully charged, the operating time is up to 8 hours.

  To connect the IOP handheld to SINAMICS G110D, SINAMICS G120D and SINAMICS G110M, the RS232 connecting cable with optical interface is required in addition.

  Updating the IOP Handheld

  The IOP Handheld can be updated and expanded using the integrated USB interface.

  Data to support future drive systems can be transferred from the PC to the IOP Handheld via drag & drop. Further, the USB interface allows user languages and wizards that will become available in the future to be subsequently downloaded and the firmware to be updated for the IOP Handheld ¹⁾.

  ¹⁾ For additional information, see
  https://support.industry.siemens.com/cs/document/67273266

  Selection and ordering data

  Description	Article No.
  IOP Handheld For use with SINAMICS G120, SINAMICS G120C, SINAMICS G120P, SINAMICS G110D, SINAMICS G120D, SINAMICS G110M and SINAMICS S110 Included in the scope of delivery: IOP Handheld housing Rechargeable batteries (4 × AA) Charging unit (international) RS232 connecting cable (3 m/9.84 ft long, for use with SINAMICS G120, SINAMICS G120C, SINAMICS G120P and SINAMICS S110) USB cable (1 m/3.28 ft long)	6SL3255-0AA00-4HA0
  RS232 connecting cable With optical interface to connect the SINAMICS G110D, SINAMICS G120D or SINAMICS G110M inverters to the IOP Handheld (2.5 m/8.2 ft long)	3RK1922-2BP00

  
  
  

  Memory card

  

  SINAMICS memory card (SD card)

  The parameter settings for an inverter can be stored on the SINAMICS SD card. When service is required, e.g. after the inverter has been replaced and the data have been downloaded from the memory card the drive system is immediately ready for use again.

  • Parameter settings can be written from the memory card to the inverter or saved from the inverter to the memory card.
  • Up to 100 parameter sets can be stored.
  • The memory card supports standard commissioning without the use of the Intelligent Operator Panel IOP Handheld or the STARTER and SINAMICS Startdrive commissioning tools.

  Note:

  The memory card is not required for operation and does not have to remain inserted.

  Selection and ordering data

  Description		Article No.
  SINAMICS memory card (SD card) 512 MB		6SL3054-4AG00-2AA0
  Optional firmware memory card
  SINAMICS SD card 512 MB + firmware V4.7 (Multicard V4.7)	NEW	6SL3054-7EH00-2BA0
  SINAMICS SD card 512 MB + Firmware V4.7 SP6 HF1 (Multicard V4.7 SP6 HF1)	NEW	6SL3054-7TD00-2BA0

  
  
  

  For more information on firmware V4.7:

  https://support.industry.siemens.com/cs/document/92554110

  Additional information on firmware V4.7 SP6 HF1:

  https://support.industry.siemens.com/cs/document/109482094

  PC inverter connection kit 2 (mini USB interface cable for communication with a PC)

  For controlling and commissioning an inverter directly from a PC via a point-to-point connection if the appropriate software (STARTER commissioning tool¹⁾, V4.3 SP3 and higher or SINAMICS Startdrive V13 and higher) has been installed.

  Selection and ordering data

  Description	Article No.
  PC inverter connection kit 2 USB cable (3 m/9.84 ft long) for SINAMICS G120C SINAMICS G120 Control Units CU230P-2 CU240B-2 CU240E-2 CU250S-2 SINAMICS G110M Control Units CU240M SINAMICS G120D Control Units CU240D-2 CU250D-2	6SL3255-0AA00-2CA0

  
  
  

  ¹⁾ The STARTER commissioning tool is also available on the Internet at
  https://support.industry.siemens.com/cs/ww/en/ps/13437/dl

  Wall mounting kit

  

  SINAMICS G110M wall mounting kit

  A wall mounting kit is available if SINAMICS G110M should not be mounted on a (geared) motor. With the wall mounting kit the SINAMCS G110M frequency inverter can be mounted close to the motor in the application and can thus be used flexibly, adapted to the conditions of the application.

  The wall mounting kit contains a metal cable gland for connecting the motor cable (max. 5 m/16.41 ft shielded) and a fan including connecting cable for cooling the Power Module.

  Note:

  Only one of the CU240M Control Units for motor frame size 71 can be fitted onto a wall mounting kit.
  The degree of protection with a wall mounting kit is IP66/UL Type 12.

  Compatible CU240M Control Units

  Control Unit	Communications via	Connection system	Control Unit for motor frame size 71
  CU240M	USS, Modbus RTU	Screw-type version	6SL3544-0LB02-1BA0
  CU240M AS-i	AS-Interface	Screw-type version	6SL3544-0LB02-1MA0
  		Plug-in version	6SL3544-0TB02-1MA0
  CU240M DP	PROFIBUS	Screw-type version	6SL3544-0LB02-1PA0
  		Plug-in version	6SL3544-0TB02-1PA0
  CU240M PN	PROFINET, EtherNet/IP	Screw-type version	6SL3544-0LB02-1FA0
  		Plug-in version	6SL3544-0TB02-1FA0

  
  
  

  Selection and ordering data

  Description		Article No.
  Wall mounting kit	NEW	6SL3566-1GA00-0GA0
  Spare part
  Replacement fan for wall mounting kit (includes fan, connecting cable and cable gland)	NEW	6SL3500-0TF02-0AA0

  
  
  

  Dimensional drawings

  

  SINAMICS G110M wall mounting kit

  Installation kits

  Different installation kits can be ordered as accessories for the Control Units with plug-in connections and Control Units with cable gland connections.

  These kits include covers or cable glands for protecting or connecting the 400 V 3 AC supply, the 24 V DC supply and the mechanical motor brake.

  Selection and ordering data

  Description	Article No.
  Installation kit for Control Units with cable gland connections Includes cable glands for connecting the 400 V 3 AC supply, the 24 V DC supply and the mechanical motor brake	6SL3566-2VA00-0GA0
  Installation kit for Control Units with plug-in connections Includes covers for protecting the 400 V 3 AC and 24 V DC input connectors and a cable gland for connecting the mechanical motor holding brake	6SL3566-2LA00-0GA0

  
  
  

  STARTER commissioning tool

  The STARTER commissioning tool (V4.3 SP3 and higher) supports the commissioning and maintenance of SINAMICS G110M inverters. The operator guidance combined with comprehensive, user-friendly functions for the relevant drive solution allow you to commission the device quickly and easily.

  Selection and ordering data

  Description	Article No.
  STARTER commissioning tool 1) on DVD‑ROM	6SL3072-0AA00-0AG0

  
  
  

  ¹⁾ The STARTER commissioning tool is also available on the Internet at https://support.industry.siemens.com/cs/ww/en/ps/13437/dl

  SINAMICS Startdrive commissioning tool

  The SINAMICS Startdrive commissioning tool (V13 and higher) supports the commissioning and maintenance of SINAMICS G110M inverters. SINAMICS Startdrive is part of the TIA Portal engineering platform. It supports the intuitive integration of SINAMICS drives in automation. The same operator control concept, the elimination of interfaces and a high degree of user-friendliness make it possible to quickly integrate SINAMICS into an automation process and start it up with the TIA Portal. The TIA Portal with SINAMICS Startdrive offers you a totally integrated engineering platform for the complete application from the project engineering phase through to commissioning and diagnostics.

  Selection and ordering data

  Description	Article No.
  SINAMICS Startdrive commissioning tool 1) on DVD‑ROM	6SL3072-4DA02-0XG0

  
  
  

  ¹⁾ The SINAMICS Startdrive commissioning tool is also available on the Internet at https://support.industry.siemens.com/cs/document/68034568

   

  An overview of all available accessories (e.g. connectors and cables) can be found under the following link:
  http://www.siemens.com/distributeddrives-supplementaryproducts

  Connecting cables for the Control Unit

  PROFINET connecting cable

  Flexible plug-in cables and plug-in connectors that can be assembled in the field for transmission of data (up to 100 Mbit/s) between Industrial Ethernet stations with IP65 degree of protection.

  Selection and ordering data

  Description	Article No.
  IE connecting cable M12‑180/M12‑180, axial outlet Pre-assembled IE FC TP trailing cable GP 2 x 2 PROFINET type C with two 4-pole M12 plugs (4-pole, D-coded), IP65/IP67 degree of protection, UL, plug/plug connector (IN/OUT) Length:
  0.3 m (0.98 ft)	6XV1870-8AE30
  0.5 m (1.64 ft)	6XV1870-8AE50
  1 m (3.28  ft)	6XV1870-8AH10
  1.5 m (4.92 ft)	6XV1870-8AH15
  2 m (6.56 ft)	6XV1870-8AH20
  3 m (9.84 ft)	6XV1870-8AH30
  5 m (16.41 ft)	6XV1870-8AH50
  10 m (32.81 ft)	6XV1870-8AN10
  15 m (49 ft)	6XV1870-8AN15
  IE connecting cable M12-180/IE FC RJ45 Plug 145 axial outlet Pre-assembled IE FC TP Trailing Cable GP 2 x 2 (PROFINET Type C) with M12 plugs (D-coded) and IE FC RJ45 plug, IP65/IP67 degree of protection Length:
  2 m (6.56 ft)	6XV1871-5TH20
  3 m (9.84 ft)	6XV1871-5TH30
  5 m (16.41 ft)	6XV1871-5TH50
  10 m (32.81 ft)	6XV1871-5TN10
  15 m (49 ft)	6XV1871-5TN15
  IE M12 Plug PRO axial outlet For assembly in the field, M12 plug-in connector (D-coded), metal enclosure, UL, fast connection method, plug connector
  1 unit	6GK1901-0DB20-6AA0
  8 units	6GK1901-0DB20-6AA8

  
  
  

  PROFIBUS connecting cable

  Flexible plug-in cables/connectors for transmission of data (up to 12 Mbit/s) from PROFIBUS stations.

  Selection and ordering data

  Description	Article No.
  PROFIBUS M12 plug-in cable axial outlet Pre-assembled with two 5-pole M12 plug/socket connectors, UL Length:
  0.3 m (0.98 ft)	6XV1830-3DE30
  0.5 m (1.64 ft)	6XV1830-3DE50
  1 m (3.28  ft)	6XV1830-3DH10
  1.5 m (4.92 ft)	6XV1830-3DH15
  2 m (6.56 ft)	6XV1830-3DH20
  3 m (9.84 ft)	6XV1830-3DH30
  5 m (16.41 ft)	6XV1830-3DH50
  10 m (32.81 ft)	6XV1830-3DN10
  15 m (49 ft)	6XV1830-3DN15
  PROFIBUS M12 plug connector axial outlet 5-pole, B-coded, metal enclosure, 1 package = 5 units
  Pin insert	6GK1905-0EA00
  Female contact insert	6GK1905-0EB00

  
  
  

  AS-Interface connecting cables

  Selection and ordering data

  Description	Article No.
  AS-Interface M12 branch To connect the AS-Interface and the UAux cable to an M12 socket, UL
  1 m (3.28 ft)	3RK1901-1NR21
  2 m (6.56 ft)	3RK1901-1NR22

  
  
  

  Connecting cables/connectors for supplying the Control Unit with power

  Selection and ordering data

  Description	Article No.
  7/8" plug-in cable, axial outlet For 24 V switched and unswitched, pre-assembled with 2 × 7/8" at both ends (axial), 5 × 1.5 mm2, 5-pole plug/socket connectors Length:
  0.3 m (0.98 ft)	6XV1822-5BE30
  0.5 m (1.64 ft)	6XV1822-5BE50
  1 m (3.28  ft)	6XV1822-5BH10
  1.5 m (4.92 ft)	6XV1822-5BH15
  2 m (6.56 ft)	6XV1822-5BH20
  3 m (9.84 ft)	6XV1822-5BH30
  5 m (16.41 ft)	6XV1822-5BH50
  10 m (32.81 ft)	6XV1822-5BN10
  15 m (49 ft)	6XV1822-5BN15
  7/8" power cable, angled outlet, pre-assembled at one end For 24 V switched and unswitched, pre-assembled with 1 × 7/8" angled at one end, 5 × 1.5 mm2 5-pole socket connector Length:
  3 m (9.84 ft)	3RK1902-3GB30
  5 m (16.41 ft)	3RK1902-3GB50
  10 m (32.81 ft)	3RK1902-3GC10
  7/8" power cable, angled outlet For 24 V switched and unswitched, pre-assembled with 2 × 7/8" angled at both ends, 5 × 1.5 mm2, 5-pole plug/socket connectors Length:
  3 m (9.84 ft)	3RK1902-3NB30
  5 m (16.41 ft)	3RK1902-3NB50
  10 m (32.81 ft)	3RK1902-3NC10
  7/8" plug-in connector, axial outlet 5-pole, B-coded, plastic enclosure, 1 package = 5 units
  Pin insert (OUT)	6GK1905-0FA00
  Female contact insert (IN)	6GK1905-0FB00
  7/8" plug-in connector, angled outlet 5-pole, B-coded, plastic enclosure, 1 package = 5 units
  Pin insert (OUT)	3RK1902-3BA00
  Female contact insert (IN)	3RK1902-3DA00

  
  
  

  Connecting cables and connectors for digital inputs and outputs

  Selection and ordering data

  Description	Article No.
  M12 plug-in cable pre-assembled at both ends, axial outlet M12 straight plug, M12 straight socket, screw mounting, 3-pole, 3 x 0.34 mm², A-coded, black PUR sheath, max. 4 A Length:
  1.5 m (4.92 ft)	3RK1902-4PB15-3AA0
  M12 connector Y cable for distributed I/Os for dual connection of I/Os using single 5‑pole M12 cables, 200 mm (7.87 in)
  Straight	6ES7194-6KA00-0XA0

  
  
  

  Connecting cables and connectors for analog inputs

  Selection and ordering data

  Description	Article No.
  M12 cable connector 8-pole plug connector
  Straight cable outlet	Ordered from and supplied by KnorrTec
  T distribution piece To connect two analog inputs 8‑pole M12 male connector to 2 × 4-pole M12 socket, angled	Ordered from and supplied by KnorrTec

  
  
  

  Connecting cables for Power Modules

  Connecting cables pre-assembled at one end and connector sets to connect to the line supply

  Selection and ordering data

  Description	Article No.
  Connecting cable pre-assembled at one end Power supply cable, open at one end, for HAN Q4/2, angled, 4 × 4 mm2
  1.5 m (4.92 ft) long	3RK1911-0DB13
  5 m (16.41 ft) long	3RK1911-0DB33
  Connector set for the power supply Female contact insert HAN Q4/2, 5 socket contacts, grommet housing, angled outlet including screw connection
  2.5 mm2	3RK1911-2BE50
  4 mm2	3RK1911-2BE10
  6 mm2	3RK1911-2BE30

  
  
  

  Connector insert for power loop-through

  Selection and ordering data

  Description	Article No.
  Connector set for power loop-through Plug insert HAN Q4/2, 4 socket contacts, grommet housing, angled outlet including screw connection
  2.5 mm2	3RK1911-2BF50
  4 mm2	3RK1911-2BF10

  
  
  

  Power bus distribution 400 V in IP65 degree of protection

  Selection and ordering data

  Not essential (daisy chaining within device); use is optional.

  Description	Article No. (Ordering see Solution Partner)
  Power T clamp connector for 2.5 ... 6 mm2 With attached 7-pole connector, female contact insert, grommet housing, UL Seals for various cable cross-sections must be ordered separately	Ordered from and supplied by Harting
  T clamp connector Completely pre-assembled	Ordered from and supplied by KnorrTec
  T distributor box, IDC connection power cable Pre-assembled, UL, uncut power cable, 2.5 ... 6 mm2 Push-in connection: 1.5 ... 6 mm2 Seals for various cable cross-sections must be ordered separately	Ordered from and supplied by Weidmüller
  Y distributor For direct connection of 400 V supply line, HAN Q4/2, conductor cross-section 1.5 ... 4 mm2	Ordered from and supplied by Harting

  
  
  

  Дальнейшая информация

  An overview of further supplementary products (e.g. connectors and cables) can be found under the following link:
  http://www.siemens.com/distributeddrives-supplementaryproducts

  For more information about the connecting cables and plug-in connectors mentioned above, please refer to Catalog IK PI.

  

  Further selected accessories are available from Siemens Solution Partners.
  Select "Distributed Field Installation System" as technology in the "Solution Partner Finder".
  http://www.siemens.com/automation/partnerfinder