TM120 Terminal Module

• Заказные данные
  (1)
• Аксессуары
  (2)
• Информационные материалы

  Информационные материалы

  

  TM120 Terminal Module

  Four temperature sensors can be evaluated via the TM120 Terminal Module. The temperature sensor inputs are safely electrically isolated from the evaluation electronics in the TM120 Terminal Module and are suitable for evaluating the temperature of special motors, e.g. SIMOTICS L-1FN linear motors and SIMOTICS T-1FW6 built-in torque motors.

  Дизайн

  The following are located on the TM120 Terminal Module:

  • 4 temperature sensor inputs for KTY84‑130, Pt1000 or PTC (Pt1000 can be used from firmware V4.7 HF17)
  • 2 DRIVE‑CLiQ sockets
  • 1 connection for the electronics power supply via the 24 V DC supply connector
  • 1 PE/protective conductor connection

  The status of the TM120 Terminal Module is indicated via a multi-color LED.

  The TM120 Terminal Module can be snapped onto a TH 35 standard mounting rail in accordance with EN 60715 (IEC 60715).

  Интеграция

  The TM120 Terminal Module can communicate via DRIVE‑CLiQ with the following Control Units with SINAMICS firmware version V4.3 and higher:

  • CU310‑2 Control Unit
  • CU320‑2 Control Unit
  • SINUMERIK Control Unit
  • SIMOTION D Control Unit or Controller Extension

  

  Example connection of TM120 Terminal Module

  Технические данные

  	TM120 Terminal Module 6SL3055-0AA00-3KA0
  Current requirement, max. at 24 V DC	0.5 A
  Conductor cross-section, max.	2.5 mm2
  Fuse protection, max.	20 A
  Temperature sensor inputs The inputs can be individually parameterized to evaluate sensors of type KTY84‑130, Pt1000, PTC or temperature switches
  Conductor cross-section	0.2 ... 6 mm2
  Constant current per sensor, approx.	2 mA
  Safe electrical separation up to line voltage, max.	480 V AC
  Power loss, typically	2.4 W
  PE connection	M4 screw
  Dimensions
  Width	30 mm (1.18 in)
  Height	150 mm (5.91 in)
  Depth	111 mm (4.37 in)
  Weight, approx.	0.41 kg (0.90 lb)