System components

• Информационные материалы

  Технические данные

  General technical specifications

  Unless clearly specified otherwise, the following technical data are valid for all the following system components of the air-cooled and liquid-cooled SINAMICS S120 drive system in the chassis format.

  Electrical specifications
  Rated voltages	380 ... 480 V 3 AC ±10 % (-15 % <1 min) 500 ... 690 V 3 AC ±10 % (-15 % <1 min)
  Line supply types	Grounded TN/TT systems and non-grounded IT systems
  Line frequency	47 ... 63 Hz
  Overvoltage category	III to EN 61800‑5‑1
  Electronics power supply	24 V DC, -15 % +20 % implemented as PELV circuit in accordance with EN 61800-5-1 Ground = negative pole grounded via the electronics
  Mechanical specifications
  Degree of protection	IP00 or IP20 dependent on type
  Protection class	I acc. to EN 61800‑5‑1
  Touch protection	EN 50274/DGUV regulation 3 when used as intended
  Ambient conditions	Storage 1)	Transport 1)	Operation
  Ambient temperature	-25 ... +55 °C (-13 ... +131 °F) Class 1K4 acc. to EN 60721‑3‑1	-25 ... +70 °C (-13 ... +158 °F) Class 2K4 acc. to EN 60721‑3‑2	Line-side components: 0 … 40 °C (32 ... 104 °F) without derating Up to 55 °C (131 °F), see derating data Control Units, supplementary system components, and Sensor Modules: 0 ... 55 °C (32 ... 131 °F) (for operation in a control cabinet) DC link components and motor-side components: 0 ... 55 °C (32 ... 131 °F)
  Relative humidity Condensation, splashwater, and ice formation not permitted (EN 60204, Part 1)	5 ... 95 % Class 1K4 acc. to EN 60721‑3‑1	5 ... 95 % at 40 °C (104 °F) Class 2K4 acc. to EN 60721‑3‑2	5 ... 95 % Class 3K3 acc. to EN 60721‑3‑3
  Environmental class/harmful chemical substances	Class 1C2 acc. to EN 60721‑3‑1	Class 2C2 acc. to EN 60721‑3‑2	Class 3C2 acc. to EN 60721‑3‑3
  Organic/biological influences	Class 1B1 acc. to EN 60721‑3‑1	Class 2B1 acc. to EN 60721‑3‑2	Class 3B1 acc. to EN 60721‑3‑3
  Degree of pollution	2 acc. to IEC/EN 61800‑5‑1	2 acc. to IEC/EN 61800‑5‑1	2 acc. to IEC/EN 61800‑5‑1
  Installation altitude	Up to 2000 m (6562 ft) above sea level without derating >2000 m (6562 ft) above sea level, see derating data
  Mechanical stability	Storage 1)	Transport 1)	Operation
  Vibratory load	–	Class 2M2 acc. to EN 60721‑3‑2	Test values acc. to EN 60068‑2‑6 test Fc: 10 ... 58 Hz with constant deflection 0.075 mm 58 ... 150 Hz with constant acceleration 9.81 m/s2 (1 × g)
  Shock load	–	Class 2M2 acc. to EN 60721‑3‑2	Test values according to EN 60068‑2‑27 test Ea: 98 m/s2 (10 × g)/20 ms
  Compliance with standards
  Certificates of suitability	CE (EMC Directive No. 2014/30/EU, Low Voltage Directive No. 2014/35/EU, Machinery Directive 2006/42/EC for functional safety) cURus or cULus (only for devices connected to line supply voltages 380 ... 480 V 3 AC and 500 ... 600 V 3 AC)
  Electromagnetic compatibility	Built-in units SINAMICS S120 chassis format can be operated in the second environment, Category C3/C2 according to EMC product standard EN 61800‑3. For further information, see section Tools and configuring.

  
  
  

  ¹⁾ In transport packaging.

  Deviations from the specified class are underlined.