MDS D200

• Заказные данные
  (1)
• Аксессуары
  (3)
• Информационные материалы

  Информационные материалы

  Транспондер  MDS D200 является пассивной (без батареи) меткой,  не требующий технического обслуживания . Создан в соответствии со  стандартом ISO 15693  Tag-it HFi technology.

  Мобильный носитель информации может использвоться в RFID системе линейки  MOBY D, а так же  SIMATIC RF300 (ISO).

  Область применения

  Подходит для различных применений от простой идентификации до решений требующих дополнения и перезаписи информации .

  Чертеж

  

  Технические данные

  Order number		6GT2600-1AD00-0AX0
  Product type designation		MDS D200 transponder
  Suitability for operation		RF200, RF300, MOBY D
  Wireless frequencies
  Operating frequency Rated value		13.56 MHz
  Electrical data
  Range maximum		600 mm; range is reader dependent: observe http://support.automation.siemens.com/WW/view/en/67384964
  Protocol with radio transmission		ISO 15693
  Transfer rate with radio transmission maximum		26.5 kbit/s
  Product feature multitag-capable		Yes
  Product component Backup battery		No
  Memory
  Type of memory		EEPROM
  Storage capacity of the user memory		256 byte
  Type of memory organization		UID (fixed code) 8 bytes, user memory 256 bytes, configuration memory 8 bytes
  Number of read cycles at ambient temperature < 40 °C maximum		100 000 000 000 000
  Number of write cycles at ambient temperature < 40 °C maximum		1 000 000
  Data retention time at ambient temperature < 40 °C not less than		10 y
  Property of memory		Block-by-block write protection of the user memory
  Type of transponder chip used		TI Tag-it HFI
  Mechanical data
  Material		PVC laminated plastic
  Color		white
  Mounting distance relating to metal surfaces recommended minimum		25 mm
  Permitted ambient conditions
  Ambient temperature
  ● during read/write access		-20 ... +60 °C
  ● outside the read/write area		-20 ... +60 °C
  ● during storage		-20 ... +60 °C
  Protection class IP		IP67
  Shock resistance		According to DIN EN 60721-3-7 Class 7 M3
  Resistance to mechanical stress		Shock and vibration according to ISO 10373 / ISO 7810, torsion and twisting according to ISO 10373 / ISO 7816-3
  Design, dimensions and weight
  Width		54 mm
  Height		0.8 mm
  Depth		85 mm
  Net weight		5 g
  Mounting type		Gluing, mounting bag (see accessories)
  Product properties, functions, components general
  Product feature
  ● printable		Yes
  Printing process		Printable on both sides
  Standards, specifications, approvals
  MTBF		228 y
  Accessories
  accessories		Fixing strap, holder, spacer