SCALANCE XP-200 managed

Заказные данные
(8)
Аксессуары
(73)

The managed Industrial Ethernet switches of the SCALANCE XP-200 product line with 8 or 16 Ethernet ports are optimally suited for setting up cabinet-free automation concepts of Industrial Ethernet networks with transmission rates of 10/100/1000 Mbps in a line, star or ring topology.

Integral redundancy manager for configuration of high availability networks in ring topologies
Electric device or network connection
Rugged metal housing with mounting options on SIMATIC ET 200pro rack, ITEM rail mounting or direct wall mounting
Rugged device connections with industrial-strength M12 plug connectors, M12 D-coded for FastEthernet (10/100 Mbps interfaces), M12 X-coded for Gigabit (1000 Mbps interfaces), PROFINET and EtherNet/IP-compliant M12 connection technology (M12 D-coded, M12 X-coded)
Redundant power supply (M12, A-coded)
Console port (M12, D-coded)
Diagnostics on the device by means of prominent LED display with integrated SELECT/SET button (power, link status, data communication, display mode)
Error signaling contact with easy adjustment using SELECT/SET button. Configuration storage using C-PLUG swap medium
Grounding screw for external ground connection

New, additional software functions compared to SCALANCE X208PRO:

Virtual Local Area Network (VLAN) port-based, protocol-based and IP-based
IGMP snooping und query (use in EtherNet/IP networks)
Access Control List (ACL) MAC-based and IP-based
Link aggregation
Standby observer for HRP
IEEE 802.1X (e.g. RADIUS)
Rapid Spanning Tree Protocol / Multi Spanning Tree Protocol (RSTP / MSTP)
Remote Network Monitoring (RMON)
Configuration in the TIA Portal as well as in Web Based Management (WBM)

Product versions

For use in PROFINET and EtherNet/IP automation systems, device variants are offered that have a corresponding default setting for the respective automation system. However, the use of a device with a PROFINET or EtherNet/IP default setting is possible in the other network at any time by changing the configuration.

Switches with PROFINET delivery state
- SCALANCE XP208
  with 8 electrical ports (10/100 Mbps, M12 D-coded) for mounting outside the control cabinet (IP65/67)
- SCALANCE XP208EEC
  with 8 electrical ports (10/100 Mbps, M12 D-coded) for mounting outside the control cabinet (IP65/67). Equipped with conformal coating PCBs for use with increased environmental requirements, e.g. rail applications (EN 50155/45545)
- SCALANCE XP208PoE EEC
  with 4 electrical ports (10/100 Mbps, M12 D-coded) and four electrical PoE ports (10/100 Mbps M12 D-coded) according to IEEE 802.3at Type 2 for mounting outside the control cabinet (IP65/67). Equipped with conformal coating PCBs for use with increased environmental requirements, e.g. rail applications (EN 50155/45545)
- SCALANCE XP216
  with 12 electrical ports (10/100 Mbps, M12 D-coded) and 4 electrical ports (10/100/1000 Mbps, M12 X-coded) for mounting outside the control cabinet
- SCALANCE XP216EEC
  with 12 electrical ports (10/100 Mbps, M12 D-coded) and 4 electrical ports (10/100/1000 Mbps, M12 X-coded) for mounting outside the control cabinet (IP65/67). Equipped with conformal coating PCBs for use with increased environmental requirements, e.g. rail applications (EN 50155/45545)
- SCALANCE XP216PoE EEC
  with 8 electrical ports (10/100 Mbps, M12 D-coded), 6 electrical PoE ports (10/100 Mbps, M12 D-coded) according to IEEE 802.3at Type 2, and two electrical PoE ports (10/100/1000 Mbps, M12 X-coded) according to IEEE 802.3at Type 2. The switch can also be operated with only two PoE ports (10/100 Mbps, M12 D-coded) according to IEEE 802.3at Type 2 and two PoE ports (10/100/1000 Mbps, M12 X-coded) according to IEEE 802.3at Type 2. For mounting outside the control cabinet (IP65/67), the switch is equipped with conformal coating PCBs for use with increased environmental requirements, e.g. rail applications (EN 50155/45545)
Switches with EtherNet/IP delivery state
- SCALANCE XP208
  with 8 electrical ports (10/100 Mbps, M12 D-coded) for mounting outside the control cabinet (IP65/67)
- SCALANCE XP216
  with 12 electrical ports (10/100 Mbps, M12 D-coded) and 4 electrical ports (10/100/1000 Mbps, M12 X-coded) for mounting outside the control cabinet (IP65/67)

Область применения

The SCALANCE XP-200 Industrial Ethernet switches enable cost-effective configuration of Industrial Ethernet line, star or ring topologies with switching functionality for networks in which high availability or remote diagnostic capabilities are required.

Features:

Industry-compatible thanks to rugged metal housing (e.g. for use in rail applications with increased mechanical loads)
Use outside the control cabinet also possible (IP65/67 degree of protection)
Various mounting options (SIMATIC ET 200pro rack, ITEM rail mounting, wall mounting)
Versatile diagnostic and management capabilities: e.g. signaling contact, remote access via SNMP, web-based management and integrated diagnostics with PROFINET and EtherNet/IP
Use in rail applications thanks to EN 50155 and EN 45545 approval and conformal coating PCBs
Use in harsh environmental conditions (-40 to +70 °C)

Дизайн

The SCALANCE XP-200 Industrial Ethernet switches with rugged metal housing are optimized for use outside the control cabinet. Mounting options: on ET 200pro rack, ITEM rail mounting or direct wall mounting in variety of mounting positions.

Switches in IP65/IP67 degree of protection have:

Two 4-pin M12 connections (A-coded) for connection of redundant power supply (2 x 24 V DC)
An LED display for display of status information using SELECT/SET button (power, link status, data traffic, power supply, signaling contact)
One 2-pin M12 interface (B-coded) for connecting the floating signaling contact
One 2-pin M12 interface (D-coded) as console access

The SCALANCE XP-200 switches are available with the following port types:

10/100 Mbps, M12 connection (D-coded);
automatic detection of the data rate (10 or 100 Mbps), with autosensing and autocrossover function for connection of IE FC cables via IE FC M12 Plug PRO 2x2 up to 100 m.
10/100/10000 Mbps, M12 connection (X-coded);
automatic detection of the data rate (10 or 100 or 1000 Mbps), with autosensing and autocrossover function for connection of IE FC cables via IE FC M12 Plug PRO 4x2 up to 100 m.

Функции

Configuration of electrical Industrial Ethernet line, star and ring topologies
Fast redundancy in the ring with:
- High Speed Redundancy Protocol (HRP), max. 0.3 second reconfiguration time with 50 switches in the ring
- PROFINET MRP (Media Redundancy Protocol), max. 0.2 second reconfiguration time of the ring with 50 switches in the ring
The functioning of the ring is continuously monitored by the integrated redundancy manager. It recognizes failure of a transmission path in the ring or failure of a SCALANCE XP-200 and activates the substitute path within 0.3 seconds with HRP or 0.2 seconds with MRP
Use in ring topologies together with SCALANCE X-200, X-300, XM-400, S627-2M and XR-500

Redundant connection of rings via HRP standby master/slave function

Uncrossed connecting cables can be used due to Autocrossover function integrated in the ports
Easy diagnostics using signaling contact, SNMP and Web browser
Easy copper cable diagnostics via Web browser for localizing cable breaks
Incorporation in the integrated system diagnostics of the TIA Portal with PROFINET diagnostics of data traffic using a configurable mirror port and a commercially available network analyzer
Optimal support of PROFINET real-time communication (RT) through prioritization
Fast device replacement in the event of a fault by using the optional C-PLUG swap medium (not included in scope of supply)

Network topology and network configuration

The SCALANCE XP-200 Industrial Ethernet Switches in degree of protection IP65/IP67 are typically mounted outside the control cabinet. They can be installed in line, star and ring electrical system topologies.

When configuring the network, the following boundary conditions must be observed:

Length of the TP cable between two SCALANCE X Industrial Ethernet switches:
- Max. 100 m with IE FC cable and IE FC M12 Plug PRO
IP address:
The IP address is assigned via DHCP (Dynamic Host Configuration Protocol). If there is no corresponding server in the network, the IP address can be assigned using the supplied software tool PST (Primary Setup Tool) or STEP 7 (TIA Portal).

SCALANCE XP208 and SCALANCE XP216 in factory automation

SCALANCE XP208EEC and SCALANCE XP216EEC on trains (train-side) and along the track (track-side)

Implementation of a network in a harsh environment with SCALANCE XP208EEC and SCALANCE XP216EEC for communication of distributed stations with WIMAX base

Commissioning and diagnostics

PROFINET diagnostic alarms from SCALANCE XP-200 switches can be displayed with the appropriate SIMATIC Engineering Tools and processed in the controller with the enhanced diagnostic function. The engineering effort for the PLC and HMI have been drastically reduced due to the complete integration in the SIMATIC concept for system error messages.

The SCALANCE XP-200 Industrial Ethernet switches can also be integrated in a network management system such as SINEMA Server using the standardized Simple Network Management Protocol (SNMP). If faults occur on the device, error messages (SNMP traps) can be sent to a network management system or as an e-mail to a specified network administrator.

The integrated web server enables configuration and diagnostics settings using a standard browser (e.g. port configuration). Statistical information can also be read out via the web server (e.g. port utilization).

The following information is displayed on site by LEDs:

Power
Port status
Data traffic
Signaling contact
Redundancy manager function

The Industrial Ethernet switches of the SCALANCE XP-200 line can also be monitored using the floating signaling contact.

Особенности

Ideal solution for configuring Industrial Ethernet line, star and ring topologies
Industrial-strength plug-in connection (10/100 Mbps M12 D-coded and 10/100/1000 Mbps, X-coded)
High network availability through configuration of redundant ring topologies (redundancy manager integrated)
Integration of the SCALANCE XP-200 Industrial Ethernet switches in the existing network management infrastructure through SNMP access
Easy integration in the process diagnostics and system diagnostics with PROFINET and EtherNet/IP
Integrated configuration and diagnostics in STEP 7 (TIA Portal) bring significant advantages during the engineering, commissioning, and operating phases of a plant
C-PLUG enables fast device replacement in the event of an error

Технические данные

Order number	6GK5208-0HA00-2AS6	6GK5208-0HA00-2TS6	6GK5208-0HA00-2ES6	6GK5208-0UA00-5ES6

Product type designation	SCALANCE XP208	SCALANCE XP208 (ETHERNET/IP)	SCALANCE XP208EEC	SCALANCE XP208POE EEC
Transmission rate
Transfer rate	10 Mbit/s, 100 Mbit/s	10 Mbit/s, 100 Mbit/s	10 Mbit/s, 100 Mbit/s	10 Mbit/s, 100 Mbit/s
Interfaces for communication integrated
Number of electrical connections
● for network components or terminal equipment	8	8	8	8
Number of 10/100 Mbit/s M12-ports (D-coded) Integrated	8	8	8	4
● with PoE				4
Interfaces others
Number of electrical connections
● for operator console	1	1	1	1
● for signaling contact	1	1	1	1
● for power supply	1	1	1	1
● for redundant voltage supply	1	1	1	1
design of the removable storage
● C-PLUG	Yes	Yes	Yes	Yes
Signal-Inputs/outputs
Operating voltage of the signaling contacts
● at DC Rated value	24 V	24 V	24 V	54 V
Operating current of the signaling contacts
● at DC maximum	0.1 A	0.1 A	0.1 A	0.1 A
Supply voltage, current consumption, power loss
Type of voltage of the supply voltage	DC	DC	DC	DC
Supply voltage
● external	24 V	24 V	24 V	54 V
● external	19.2 ... 28.8 V	19.2 ... 28.8 V	19.2 ... 28.8 V	46 ... 57 V
Supply voltage 1 Rated value
● Consumed current 1 at rated supply voltage maximum	0.2 A	0.2 A	0.2 A	2.5 A
● Power loss [W] 1 Rated value	4.8 W	4.8 W	4.8 W	9 W
Product component fusing at power supply input	Yes	Yes	Yes	Yes
Consumed current maximum	0.21 A	0.21 A	0.21 A	2.4 A
Power loss [W]
● at DC at 24 V	5 W	5 W	5 W
● maximum				9 W
Supplied active power of PSE with PoE
● per port maximum				120 W
Permitted ambient conditions
Ambient temperature
● during operation	-40 ... +70 °C	-40 ... +70 °C	-40 ... +70 °C	-40 ... +70 °C
● during storage	-40 ... +70 °C	-40 ... +70 °C	-40 ... +70 °C	-40 ... +70 °C
● during transport	-40 ... +70 °C	-40 ... +70 °C	-40 ... +70 °C	-40 ... +70 °C
Relative humidity
● at 25 °C without condensation during operation maximum	95 %	95 %	95 %	95 %
Protection class IP	IP65/67	IP65/67	IP65/67	IP65/67
Design, dimensions and weight
Design	compact	compact	compact	compact
Width	200 mm	200 mm	200 mm	200 mm
Height	200 mm	200 mm	200 mm	200 mm
Depth	49 mm	49 mm	49 mm	49 mm
Net weight	1.8 kg	1.8 kg	1.8 kg	1.8 kg
Product feature conformal coating			Yes	Yes
Material of the enclosure	Aluminum	Aluminum	Aluminum	Aluminum
Mounting type	ET200pro module carrier	ET200pro module carrier	ET200pro module carrier	ET200pro module carrier
● wall mounting	Yes	Yes	Yes	Yes
Product properties, functions, components general
Cascading in the case of a redundant ring at reconfiguration time of <\~0.3\~s	50	50	50	50
Cascading in cases of star topology	any (depending only on signal propagation time)	any (depending only on signal propagation time)	any (depending only on signal propagation time)	any (depending only on signal propagation time)
Product functions management, configuration
Product function
● CLI	Yes	Yes	Yes	Yes
● web-based management	Yes	Yes	Yes	Yes
● MIB support	Yes	Yes	Yes	Yes
● TRAPs via email	Yes	Yes	Yes	Yes
● Configuration with STEP 7	Yes	Yes	Yes	Yes
● RMON	Yes	Yes	Yes	Yes
● Port mirroring	Yes	Yes	Yes	Yes
● multiport mirroring	Yes	Yes	Yes	Yes
● CoS	Yes	Yes	Yes	Yes
● with IRT PROFINET IO switch	No	No	No	No
● PROFINET IO diagnosis	Yes	Yes	Yes	Yes
● switch-managed	Yes	Yes	Yes	Yes
Telegram length for Ethernet maximum	1 518 byte	1 518 byte	1 518 byte	1 518 byte
Protocol is supported
● Telnet	Yes	Yes	Yes	Yes
● HTTP	Yes	Yes	Yes	Yes
● HTTPS	Yes	Yes	Yes	Yes
● TFTP	Yes	Yes	Yes	Yes
● FTP	Yes	Yes	Yes	Yes
● BOOTP	No	No	No	No
● DCP	Yes	Yes	Yes	Yes
● LLDP	Yes	Yes	Yes	Yes
● EtherNet/IP	Yes	Yes	Yes	Yes
● IGMP (snooping/querier)	Yes	Yes	Yes	Yes
Identification & maintenance function
● I&M0 - device-specific information	Yes	Yes	Yes	Yes
● I&M1 – higher-level designation/location designation	Yes	Yes	Yes	Yes
Protocol is supported
● SNMP v1	Yes	Yes	Yes	Yes
● SNMP v2	Yes	Yes	Yes	Yes
● SNMP v3	Yes	Yes	Yes	Yes
Product functions Diagnosis
Product function
● Port diagnostics	Yes	Yes	Yes	Yes
● Statistics Packet Size	Yes	Yes	Yes	Yes
● Statistics packet type	Yes	Yes	Yes	Yes
● Error statistics	Yes	Yes	Yes	Yes
● SysLog	Yes	Yes	Yes	Yes
● loopback diagnostics	Yes	Yes	Yes	Yes
Product functions VLAN
Product function
● VLAN - port based	Yes	Yes	Yes	Yes
● VLAN - protocol-based	No	No	No	No
● VLAN - IP-based	No	No	No	No
● VLAN dynamic	No	No	No	No
Number of VLANs maximum	4 094	4 094	4 094	4 094
Product functions DHCP
Product function
● DHCP server	Yes	Yes	Yes	Yes
● DHCP client	Yes	Yes	Yes	Yes
● DHCP Option 82	Yes	Yes	Yes	Yes
● DHCP Option 66	Yes	Yes	Yes	Yes
● DHCP Option 67	Yes	Yes	Yes	Yes
Product functions Redundancy
Product function
● Ring redundancy	Yes	Yes	Yes	Yes
● High Speed Redundancy Protocol (HRP)	Yes	Yes	Yes	Yes
● high speed redundancy protocol (HRP) with redundancy manager	Yes	Yes	Yes	Yes
● high speed redundancy protocol (HRP) with standby redundancy	Yes	Yes	Yes	Yes
Protocol is supported Media Redundancy Protocol (MRP)	Yes	Yes	Yes	Yes
Product function
● media redundancy protocol (MRP) with redundancy manager	Yes	Yes	Yes	Yes
● redundancy procedure RSTP	Yes	Yes	Yes	Yes
● redundancy procedure MSTP	Yes	Yes	Yes	Yes
● Passive listening	Yes	Yes	Yes	Yes
Product functions Security
Product function
● RADIUS client	Yes	Yes	Yes	Yes
Protocol is supported
● SSH	Yes	Yes	Yes	Yes
● SSL	Yes	Yes	Yes	Yes
Product functions Time
Product function
● SICLOCK support	Yes	Yes	Yes	Yes
● NTP-client	Yes	Yes	Yes	Yes
● SNTP client	Yes	Yes	Yes	Yes
Protocol is supported
● NTP	Yes	Yes	Yes	Yes
● SNTP	Yes	Yes	Yes	Yes
Standards, specifications, approvals
Standard
● for FM	FM3611: Class 1, Divison 2, Group A, B, C, D / T4, CL.1, Zone 2, GP. IIC, T4	FM3611: Class 1, Divison 2, Group A, B, C, D / T4, CL.1, Zone 2, GP. IIC, T4	FM3611: Class 1, Divison 2, Group A, B, C, D / T4, CL.1, Zone 2, GP. IIC, T4	FM3611: Class 1, Divison 2, Group A, B, C, D / T4, CL.1, Zone 2, GP. IIC, T4
● for hazardous zone	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X
● for safety from CSA and UL	UL 60950-1, CSA C22.2 No. 60950-1	UL 60950-1, CSA C22.2 No. 60950-1	UL 60950-1, CSA C22.2 No. 60950-1	UL 60950-1, CSA C22.2 No. 60950-1
● for hazardous zone from CSA and UL	ANSI / ISA 12.12.01, CSA C22.2 No. 213-M1987, CL. 1 / Div. 2 / GP. A, B, C, D T4, CL. 1 / Zone 2 / GP. IIC, T4	ANSI / ISA 12.12.01, CSA C22.2 No. 213-M1987, CL. 1 / Div. 2 / GP. A, B, C, D T4, CL. 1 / Zone 2 / GP. IIC, T4	ANSI / ISA 12.12.01, CSA C22.2 No. 213-M1987, CL. 1 / Div. 2 / GP. A, B, C, D T4, CL. 1 / Zone 2 / GP. IIC, T4	ANSI / ISA 12.12.01, CSA C22.2 No. 213-M1987, CL. 1 / Div. 2 / GP. A, B, C, D T4, CL. 1 / Zone 2 / GP. IIC, T4
● for emitted interference	EN 61000-6-4 (Class A)	EN 61000-6-4 (Class A)	EN 61000-6-4 (Class A)	EN 61000-6-4 (Class A)
● for interference immunity	EN 61000-6-2	EN 61000-6-2	EN 61000-6-2	EN 61000-6-2
Certificate of suitability CE marking	Yes	Yes	Yes	Yes
Certificate of suitability RoHS conformity	Yes	Yes	Yes	Yes
Certificate of suitability
● C-Tick	Yes	Yes	Yes	Yes
● E1 approval			Yes	Yes
● E1 approval			Yes	Yes
● Railway application in accordance with EN 50155	No	No	Yes	Yes
● Railway application in accordance with EN 50124-1	No	No	Yes	Yes
● Fire protection in accordance with EN 45545-2			Yes	Yes
● KC approval	Yes	Yes	Yes	Yes
MTBF at 40 °C	77 y	77 y	77 y	55 y
Accessories
Product extension optional C-PLUG	Yes	Yes	Yes	Yes

Order number	6GK5216-0HA00-2AS6	6GK5216-0HA00-2TS6	6GK5216-0HA00-2ES6	6GK5216-0UA00-5ES6

Product type designation	SCALANCE XP216	SCALANCE XP216 (ETHERNET/IP)	SCALANCE XP216EEC	SCALANCE XP216POE EEC
Transmission rate
Transfer rate	10 Mbit/s, 100 Mbit/s, 1 000 Mbit/s	10 Mbit/s, 100 Mbit/s, 1 000 Mbit/s	10 Mbit/s, 100 Mbit/s, 1 000 Mbit/s	10 Mbit/s, 100 Mbit/s, 1 000 Mbit/s
Interfaces for communication integrated
Number of electrical connections
● for network components or terminal equipment	16	16	16	16
Number of 10/100 Mbit/s M12-ports (D-coded) Integrated	12	12	12	10
● with PoE				2
Number of 10/100/1000 Mbit/s M12-ports (X-coded)
● Integrated	4	4	4	2
● with PoE				2
Interfaces others
Number of electrical connections
● for operator console	1	1	1	1
● for signaling contact	1	1	1	1
● for power supply	1	1	1	1
● for redundant voltage supply	1	1	1	1
design of the removable storage
● C-PLUG	Yes	Yes	Yes	Yes
Signal-Inputs/outputs
Operating voltage of the signaling contacts
● at DC Rated value	24 V	24 V	24 V	54 V
Operating current of the signaling contacts
● at DC maximum	0.1 A	0.1 A	0.1 A	0.1 A
Supply voltage, current consumption, power loss
Type of voltage of the supply voltage	DC	DC	DC	DC
Supply voltage
● external	24 V	24 V	24 V	54 V
● external	19.2 ... 28.8 V	19.2 ... 28.8 V	19.2 ... 28.8 V	46 ... 57 V
Supply voltage 1 Rated value
● Consumed current 1 at rated supply voltage maximum	0.4 A	0.4 A	0.4 A	2.5 A
● Power loss [W] 1 Rated value	9.6 W	9.6 W	9.6 W	13 W
Product component fusing at power supply input	Yes	Yes	Yes	Yes
Consumed current maximum	0.335 A	0.335 A	0.335 A	2.5 A
Power loss [W]
● at DC at 24 V	8 W	8 W	8 W
● maximum				13 W
Supplied active power of PSE with PoE
● per port maximum				120 W
Permitted ambient conditions
Ambient temperature
● during operation	-40 ... +70 °C	-40 ... +70 °C	-40 ... +70 °C	-40 ... +70 °C
● during storage	-40 ... +70 °C	-40 ... +70 °C	-40 ... +70 °C	-40 ... +70 °C
● during transport	-40 ... +70 °C	-40 ... +70 °C	-40 ... +70 °C	-40 ... +70 °C
Relative humidity
● at 25 °C without condensation during operation maximum	95 %	95 %	95 %	95 %
Protection class IP	IP65/67	IP65/67	IP65/67	IP65/67
Design, dimensions and weight
Design	compact	compact	compact	compact
Width	200 mm	200 mm	200 mm	200 mm
Height	280 mm	280 mm	280 mm	280 mm
Depth	49 mm	49 mm	49 mm	49 mm
Net weight	2.5 kg	2.5 kg	2.5 kg	2.5 kg
Product feature conformal coating			Yes	Yes
Material of the enclosure	Aluminum	Aluminum	Aluminum	Aluminum
Mounting type	ET200pro module carrier	ET200pro module carrier	ET200pro module carrier	ET200pro module carrier
● wall mounting	Yes	Yes	Yes	Yes
Product properties, functions, components general
Cascading in the case of a redundant ring at reconfiguration time of <\~0.3\~s	50	50	50	50
Cascading in cases of star topology	any (depending only on signal propagation time)	any (depending only on signal propagation time)	any (depending only on signal propagation time)	any (depending only on signal propagation time)
Product functions management, configuration
Product function
● CLI	Yes	Yes	Yes	Yes
● web-based management	Yes	Yes	Yes	Yes
● MIB support	Yes	Yes	Yes	Yes
● TRAPs via email	Yes	Yes	Yes	Yes
● Configuration with STEP 7	Yes	Yes	Yes	Yes
● RMON	Yes	Yes	Yes	Yes
● Port mirroring	Yes	Yes	Yes	Yes
● multiport mirroring	Yes	Yes	Yes	Yes
● CoS	Yes	Yes	Yes	Yes
● with IRT PROFINET IO switch	No	No	No	No
● PROFINET IO diagnosis	Yes	Yes	Yes	Yes
● switch-managed	Yes	Yes	Yes	Yes
Telegram length for Ethernet maximum	1 518 byte	1 518 byte	1 518 byte	1 518 byte
Protocol is supported
● Telnet	Yes	Yes	Yes	Yes
● HTTP	Yes	Yes	Yes	Yes
● HTTPS	Yes	Yes	Yes	Yes
● TFTP	Yes	Yes	Yes	Yes
● FTP	Yes	Yes	Yes	Yes
● BOOTP	No	No	No	No
● DCP	Yes	Yes	Yes	Yes
● LLDP	Yes	Yes	Yes	Yes
● EtherNet/IP	Yes	Yes	Yes	Yes
● IGMP (snooping/querier)	Yes	Yes	Yes	Yes
Identification & maintenance function
● I&M0 - device-specific information	Yes	Yes	Yes	Yes
● I&M1 – higher-level designation/location designation	Yes	Yes	Yes	Yes
Protocol is supported
● SNMP v1	Yes	Yes	Yes	Yes
● SNMP v2	Yes	Yes	Yes	Yes
● SNMP v3	Yes	Yes	Yes	Yes
Product functions Diagnosis
Product function
● Port diagnostics	Yes	Yes	Yes	Yes
● Statistics Packet Size	Yes	Yes	Yes	Yes
● Statistics packet type	Yes	Yes	Yes	Yes
● Error statistics	Yes	Yes	Yes	Yes
● SysLog	Yes	Yes	Yes	Yes
● loopback diagnostics	Yes	Yes	Yes	Yes
Product functions VLAN
Product function
● VLAN - port based	Yes	Yes	Yes	Yes
● VLAN - protocol-based	No	No	No	No
● VLAN - IP-based	No	No	No	No
● VLAN dynamic	No	No	No	No
Number of VLANs maximum	4 094	4 094	4 094	4 094
Product functions DHCP
Product function
● DHCP server	Yes	Yes	Yes	Yes
● DHCP client	Yes	Yes	Yes	Yes
● DHCP Option 82	Yes	Yes	Yes	Yes
● DHCP Option 66	Yes	Yes	Yes	Yes
● DHCP Option 67	Yes	Yes	Yes	Yes
Product functions Redundancy
Product function
● Ring redundancy	Yes	Yes	Yes	Yes
● High Speed Redundancy Protocol (HRP)	Yes	Yes	Yes	Yes
● high speed redundancy protocol (HRP) with redundancy manager	Yes	Yes	Yes	Yes
● high speed redundancy protocol (HRP) with standby redundancy	Yes	Yes	Yes	Yes
Protocol is supported Media Redundancy Protocol (MRP)	Yes	Yes	Yes	Yes
Product function
● media redundancy protocol (MRP) with redundancy manager	Yes	Yes	Yes	Yes
● redundancy procedure RSTP	Yes	Yes	Yes	Yes
● redundancy procedure MSTP	Yes	Yes	Yes	Yes
● Passive listening	Yes	Yes	Yes	Yes
Product functions Security
Product function
● RADIUS client	Yes	Yes	Yes	Yes
Protocol is supported
● SSH	Yes	Yes	Yes	Yes
● SSL	Yes	Yes	Yes	Yes
Product functions Time
Product function
● SICLOCK support	Yes	Yes	Yes	Yes
● NTP-client	Yes	Yes	Yes	Yes
● SNTP client	Yes	Yes	Yes	Yes
Protocol is supported
● NTP	Yes	Yes	Yes	Yes
● SNTP	Yes	Yes	Yes	Yes
Standards, specifications, approvals
Standard
● for FM	FM3611: Class 1, Divison 2, Group A, B, C, D / T4, CL.1, Zone 2, GP. IIC, T4	FM3611: Class 1, Divison 2, Group A, B, C, D / T4, CL.1, Zone 2, GP. IIC, T4	FM3611: Class 1, Divison 2, Group A, B, C, D / T4, CL.1, Zone 2, GP. IIC, T4	FM3611: Class 1, Divison 2, Group A, B, C, D / T4, CL.1, Zone 2, GP. IIC, T4
● for hazardous zone	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X
● for safety from CSA and UL	UL 60950-1, CSA C22.2 No. 60950-1	UL 60950-1, CSA C22.2 No. 60950-1	UL 60950-1, CSA C22.2 No. 60950-1	UL 60950-1, CSA C22.2 No. 60950-1
● for hazardous zone from CSA and UL	ANSI / ISA 12.12.01, CSA C22.2 No. 213-M1987, CL. 1 / Div. 2 / GP. A, B, C, D T4, CL. 1 / Zone 2 / GP. IIC, T4	ANSI / ISA 12.12.01, CSA C22.2 No. 213-M1987, CL. 1 / Div. 2 / GP. A, B, C, D T4, CL. 1 / Zone 2 / GP. IIC, T4	ANSI / ISA 12.12.01, CSA C22.2 No. 213-M1987, CL. 1 / Div. 2 / GP. A, B, C, D T4, CL. 1 / Zone 2 / GP. IIC, T4	ANSI / ISA 12.12.01, CSA C22.2 No. 213-M1987, CL. 1 / Div. 2 / GP. A, B, C, D T4, CL. 1 / Zone 2 / GP. IIC, T4
● for emitted interference	EN 61000-6-4 (Class A)	EN 61000-6-4 (Class A)	EN 61000-6-4 (Class A)	EN 61000-6-4 (Class A)
● for interference immunity	EN 61000-6-2	EN 61000-6-2	EN 61000-6-2	EN 61000-6-2
Certificate of suitability CE marking	Yes	Yes	Yes	Yes
Certificate of suitability RoHS conformity	Yes	Yes	Yes	Yes
Certificate of suitability
● C-Tick	Yes	Yes	Yes	Yes
● E1 approval			Yes	Yes
● E1 approval			Yes	Yes
● Railway application in accordance with EN 50155	No	No	Yes	Yes
● Railway application in accordance with EN 50124-1	No	No	Yes	Yes
● Fire protection in accordance with EN 45545-2			Yes	Yes
● KC approval	Yes	Yes	Yes	Yes
MTBF at 40 °C	48 y	48 y	48 y	35 y
Accessories
Product extension optional C-PLUG	Yes	Yes	Yes	Yes

Дальнейшая информация

Selection tool:

To assist in selecting the right Industrial Ethernet switches as well as configuration of modular variants, the SIMATIC NET Selection Tool and the TIA Selection Tool are available at:

www.siemens.com/snst-standalone
www.siemens.com/tia-selection-tool-standalone