Central Interface Module (CIM)

Заказные данные
(2)
Аксессуары
(4)

Информационные материалы

The Central Interface Module (CIM) is the intelligent processor module of the SIPLUS HCS4300 heating control system.

Дизайн

Module (encapsulated) in metal enclosure
3 LEDs for normal operation (green), heating on (yellow) and fault (red)
PROFINET interface (up to 100 MBaud) with double switch
Differential serial bus interface for the power output modules (POM)
Connection of up to 6 POMs possible per CIM

Функции

Communication

PROFINET

Import of parameter settings from the higher-level control system
Transfer of diagnostic information to the higher-level control system

Serial bus (internal)

Control and monitoring of up to 54 power channels

Performance features

Calculation of manipulated variables of power channels
Setpoints can be adjusted from 0% to 100% in increments of 1%
Even load distribution over all power channels and over all SIPLUS HCS4300 heating control systems operated as an integrated group
Simple adaptation to any production process through the selection of operating modes
Diagnostics functions
Evaluation of diagnostics information from connected power output modules
Phase-sequence detection indicating whether phases L1, L2, and L3 are correctly connected
Automatic detection of the line frequency

Технические данные

Order number	6BK1943-1AA00-0AA0	6BK1943-1BA00-0AA0	6BK1943-1CA00-0AA0
	HCS CIM4310 PROFINET	HCS CIM4310 PROFIBUS	HCS CIM4310 EtherNet/IP
General information
Product brand name	SIPLUS
Product designation	CIM4310 PROFINET	CIM4310 PROFIBUS
Installation type/mounting
Mounting type	Screw mounting to POM
Mounting position	vertical
Type of ventilation	Forced ventilation
Supply voltage
Type of supply voltage	DC
Rated value (DC)	24 V
Relative negative tolerance	20 %
Relative positive tolerance	20 %
Resistance thermometer (RTD)
● Design of electrical connection for supply voltage	Connector 2x 2-pin with tension spring connection
— Connectable conductor cross-sections, solid	1x (0.2 ... 2.5 mm²)
— Connectable conductor cross-sections, finely stranded with wire end processing	1x (0.2 ... 2.5 mm²)
— Connectable conductor cross-sections for AWG cables	1x (26 ... 12)
Power
Active power input	3 W
Hardware configuration
Type of power output connectable	POM4320
Slots
● Number of slots	1
Interfaces
Interfaces/bus type	PROFINET IO	PROFIBUS DP	EtherNet/IP
PROFINET IO
● Transmission rate, max.	100 Mbit/s
● Design of electrical connection of PROFINET interface	2 x RJ45
PROFIBUS DP
● Transmission rate, max.		12 Mbit/s
● Design of electrical connection of PROFIBUS interface		9-pin sub D socket
EtherNet/IP
● Transmission rate, max.			100 Mbit/s
● Design of EtherNet/IP interface electrical connection			2 x RJ45
Protocols
Supports protocol for PROFINET IO	Yes	No
PROFIBUS DP	No	Yes	No
Further protocols
● EtherNet/IP			Yes
Interrupts/diagnostics/status information
Number of status displays	3
LED status display	LED green = ready, LED yellow = heating on/off, LED red = error display
Isolation
Overvoltage category	III
EMC
EMC interference emission	Limit value in accordance with IEC 61000-6-4:2007 + A1:2011
Electrostatic discharge acc. to IEC 61000-4-2	4 kV contact discharge / 8 kV air discharge
Field-related interference acc. to IEC 61000-4-3	10 V/m (80 ... 1 000 MHz), 3 V/m (1.4 ... 2.0 GHz), 1 V/m (2.0 ... 2.7 GHz)
Conducted interference due to burst acc. to IEC 61000-4-4	2 kV power supply lines, 2 kV PROFINET cables	2 kV power supply lines / 2 kV PROFIBUS cables	2 kV power supply lines, 2 kV PROFINET cables
Conducted interference due to surge acc. to IEC 61000-4-5	DC supply lines: 0.5 kV symmetric and unsymmetric PROFINET cables: 1 kV unsymmetric	DC supply lines: 0.5 kV symmetrical and asymmetrical, PROFIBUS lines: 1 kV asymmetrical	DC supply lines: 0.5 kV symmetric and unsymmetric PROFINET cables: 1 kV unsymmetric
Conducted interference due to high-frequency radiation acc. to IEC 61000-4-6	10 V (0.15 ... 80 MHz)
Degree and class of protection
IP degree of protection	IP20
Standards, approvals, certificates
Degree of pollution	2
Device tag according to DIN EN 81346-2	K
Ambient conditions
Ambient temperature during operation
● min.	0 °C
● max.	55 °C
Ambient temperature during storage/transportation
● Storage, min.	-25 °C
● Storage, max.	70 °C
● Transportation, min.	-25 °C
● Transportation, max.	70 °C
Air pressure acc. to IEC 60068-2-13
● Operation, min.	860 hPa
● Operation, max.	1 080 hPa
● Storage, min.	660 hPa
● Storage, max.	1 080 hPa
● Installation altitude above sea level, max.	2 000 m
Relative humidity
● Operation at 25 ℃, max.	95 %
● Operation at 50 ℃, max.	50 %; 95 % at 25 °C, decreasing linearly to 50 % at 50 °C
Vibrations
● Vibration resistance during operation acc. to IEC 60068-2-6	10 ... 58 Hz / 0.075 mm, 58 ... 150 Hz / 1 g
● Vibration resistance during storage acc. to IEC 60068-2-6	5 ... 8.5 Hz / 3.5 mm, 8.5 ... 500 Hz / 1 g
Shock testing
● Shock resistance during operation acc. to IEC 60068-2-27	15 g / 11 ms / 3 shocks/axis
● Shock resistance during storage acc. to IEC 60068-2-29	25 g / 6 ms / 1 000 shocks/axis
Dimensions
Width	56 mm
Height	285 mm
Depth	136 mm