Товаров
  
корзина пуста
  • Каталог оборудования Siemens

SCALANCE W788 RJ45 для использования в шкафах управления

  • Заказные данные
    (4)
  • Аксессуары
    (8)
  • Информационные материалы

    Информационные материалы

    • Точки доступа для установки в шкафы управления.
    • Недорогая альтернатива для использования в помещениях с менее тяжелыми условиями окружающей среды.
    • Прочный алюминиевый корпус со степенью защиты IP30, обеспечивающий защиту от механических и электромагнитных воздействий в промышленных зонах.

    Дизайн

    • Прочный алюминиевый корпус с высокой стойкостью к ударным и вибрационным воздействиям.
    • Защита от проникновения пыли, степень защиты корпуса IP30.
    • Диапазон рабочих температур от -20 до +60 °C.
    • Устойчивость к воздействию конденсата. 
    • Установка в шкафы управления.
    • 3 гнезда R-SMA для подключения внешних антенн (6 гнезд R-SMA для вариантов с двумя беспроводными модулями).
    • Посадочные места для антенн, оптимизированные для использования технологии 3x3 MIMO. Установленные непосредственно на корпусе прибора антенны не оказывают взаимного влияния друг на друга.
    • Гнездо RJ45 для подключения к 10/100/1000 Мбит/с сети с питанием через Ethernet по стандарту IEEE 802.3at тип 1 (соответствует IEEE 802.3af).
    • Два ввода для подключения резервированных цепей питания =24 В.
    • Отсек для установки съемного модуля памяти C-PLUG.
    • Светодиоды индикации состояний и наличия ошибок в работе модуля.
    • Дискретный вход для подключения датчика. Например, от системы управления сетью на основе протокола SNMP.
    • Дискретный выход для конвертирования SNMP команды в сигнал и аппаратного переключения функций.
    • Монтаж: настенный, на профильную шину S7 или на стандартную 35 мм профильную шину.

    Конструкция и интерфейсы точки доступа SCALANCE W788-2 RJ45

    Версии приборов 

    SCALANCE W788-1 RJ45

    • Беспроводная радио карта постоянно установлена в приборе

    SCALANCE W788-2 RJ45

    • Две беспроводные радио карты постоянно установлены в приборе

    Функции

    Точки доступа SCALANCE W788 RJ45 могут функционировать в режиме Ethernet клиента. Альтернативно для этой цели могут использоваться модули Ethernet клиентов SCALANCE W748 RJ45.

    В сочетании с модулями Ethernet клиентов SCALANCE W748 RJ45 со степенью защиты IP30 могут создаваться инфраструктуры, в которых широкий диапазон рабочих температур, а также защита от пыли и воды играют менее важную роль.

    Технические данные

    Order number

    6GK5788-1FC00-0AA0

    6GK5788-2FC00-0AA0

    6GK5788-1FC00-0AB0 1)

    6GK5788-2FC00-0AB0 1)

    Product type designation

    SCALANCE W788-1 RJ45

    SCALANCE W788-2 RJ45

    Transmission rate

     

     

     

     

    • Transfer rate with WLAN maximum

    450 Mbit/s

    450 Mbit/s

    • Transfer rate for Industrial Ethernet

    10 Mbit/s, 100 Mbit/s, 1 000 Mbit/s, 10 Mbit/s, 1 000 Mbit/s

    10 Mbit/s, 100 Mbit/s, 1 000 Mbit/s, 10 Mbit/s, 1 000 Mbit/s

    Interfaces

     

     

    Number of electrical connections

     

     

    • for network components or terminal equipment

    1

    1

    • for power supply

    1

    1

    • for redundant voltage supply

    1

    1

    Type of electrical connection

     

     

    • for network components or terminal equipment

    RJ45 socket

    RJ45 socket

    • for power supply

    4-pole screw terminal, PoE

    4-pole screw terminal, PoE

    design of the removable storage

     

     

    • C-PLUG

    Yes

    Yes

    • KEY-PLUG

    Yes

    Yes

    Interfaces wireless

     

     

    Number of radio cards permanently installed

    1

    2

    Transmission mode for multiple input multiple output (MIMO)

    3x3

    3x3

    Number of spatial streams

    3

    3

    Number of electrical connections for external antenna(s)

    3

    6

    Type of electrical connection for external antenna(s)

    R-SMA (socket)

    R-SMA (socket)

    Product feature external antenna can be mounted directly on device

    Yes

    Yes

    Signal-Inputs/outputs

     

     

    Number of digital inputs

    1

    1

    Number of digital outputs

    1

    1

    Type of electrical connection at the digital inputs/outputs

    4-pole screw terminal

    4-pole screw terminal

    Signal range at digital input

    24 V DC, safety extra-low voltage

    24 V DC, safety extra-low voltage

    Signal range at digital output

    24 V DC / 1 A

    24 V DC / 1 A

    Supply voltage, current consumption, power loss

     

     

    Type of voltage of the supply voltage

    DC

    DC

    Supply voltage 1

     

     

    • from terminal block

    19.2 V

    19.2 V

    Supply voltage 2

     

     

    • from terminal block

    28.8 V

    28.8 V

    Supply voltage

     

     

    • from Power-over-Ethernet acc. to IEEE802.3at for type 1 and IEEE802.3af

    48 V

    48 V

    • from Power-over-Ethernet acc. to IEEE802.3at for type 2

    50 V

    50 V

    Consumed current

     

     

    • at DC at 24 V typical

    0.45 A

    0.63 A

    • with Power-over-Ethernet according to IEEE802.3at for type 1 and IEEE802.3af typical

    0.22 A

    0.22 A

    • with Power-over-Ethernet according to IEEE802.3at for type 2 typical

    0.3 A

    Power loss [W]

     

     

    • at DC at 24 V typical

    10.7 W

    15 W

    • with Power-over-Ethernet according to IEEE802.3at for type 1 and IEEE802.3af typical

    10.7 W

    • with Power-over-Ethernet according to IEEE802.3at for type 2 typical

    15 W

    Permitted ambient conditions

     

     

    Ambient temperature

     

     

    • during operation

    -20 ... +60 °C

    -20 ... +60 °C

    • during storage

    -40 ... +85 °C

    -40 ... +85 °C

    • during transport

    -40 ... +85 °C

    -40 ... +85 °C

    Relative humidity at 25 °C without condensation during operation maximum

    90 %

    90 %

    Ambient condition for operation

    When used under hazardous conditions (Zone 2), the SCALANCE W788-x or W748-x product must be installed in an enclosure. To comply with EN 50021, this enclosure must meet the requirements of at least IP 54 in compliance with EN 60529.

    When used under hazardous conditions (Zone 2), the SCALANCE W788-x or W748-x product must be installed in an enclosure. To comply with EN 50021, this enclosure must meet the requirements of at least IP 54 in compliance with EN 60529.

    Protection class IP

    IP30

    IP30

    Design, dimensions and weight

     

     

    Width of the enclosure without antenna

    200 mm

    200 mm

    Height of the enclosure without antenna

    158 mm

    158 mm

    Depth of the enclosure without antenna

    79 mm

    79 mm

    Net weight

    1.7 kg

    1.7 kg

    Mounting type

    For mounting on 35 mm DIN rail, an additional mounitng adapter is required

    For mounting on 35 mm DIN rail, an additional mounitng adapter is required

    • S7-300 rail mounting

    Yes

    Yes

    • S7-1500 rail mounting

    Yes

    Yes

    • 35 mm DIN rail mounting

    Yes

    Yes

    • wall mounting

    Yes

    Yes

    Wireless frequencies

     

     

    Operating frequency

     

     

    • for WLAN in 2.4 GHz frequency band

    2.41 ... 2.48 GHz

    2.41 ... 2.48 GHz

    • for WLAN in 5 GHz frequency band

    4.9 ... 5.8 GHz

    4.9 ... 5.8 GHz

    Product properties, functions, components general

     

     

    Product function Access Point Mode

    Yes

    Yes

    Product function Client Mode

    Yes

    Yes

    Number of SSIDs

    8

    16

    Product function

     

     

    • iPCF Access Point

    Yes; Only in combination with the 'KEY-PLUG W780 iFeatures'

    Yes; Only in combination with the 'KEY-PLUG W780 iFeatures'

    • iPCF client

    Yes; Only in combination with the 'KEY-PLUG W780 iFeatures' or 'KEY-PLUG W740 iFeatures'

    Yes; Only in combination with the 'KEY-PLUG W780 iFeatures' or 'KEY-PLUG W740 iFeatures'

    • iPCF-MC Access Point

    No

    Yes; Only in combination with the 'KEY-PLUG W780 iFeatures'

    • iPCF-MC client

    Yes; Only in combination with 'KEY-PLUG W780 iFeatures' or 'KEY-PLUG W740 iFeatures'

    Yes; Only in combination with 'KEY-PLUG W780 iFeatures' or 'KEY-PLUG W740 iFeatures'

    Number of iPCF-capable radio modules

    1

    2

    Product function iREF

    Yes; In combination only with 'KEY-PLUG W780 iFeatures'

    Yes; In combination only with 'KEY-PLUG W780 iFeatures'

    Number of iREF-capable radio modules

    1

    2

    Product function iPRP

    Yes; In combination with the 'KEY-PLUG W780 iFeatures' only

    Yes; In combination with the 'KEY-PLUG W780 iFeatures' only

    Product functions management, configuration

     

     

    Number of manageable IP addresses in client

    8

    8

    Product function

     

     

    • CLI

    Yes

    Yes

    • web-based management

    Yes

    Yes

    • MIB support

    Yes

    Yes

    • TRAPs via email

    Yes

    Yes

    • Configuration with STEP 7

    Yes

    Yes

    • configuration with STEP 7 in the TIA Portal

    Yes

    Yes

    • operation with IWLAN controller

    No

    No

    • operation with Enterasys WLAN controller

    No

    No

    • forced roaming on IP down with IWLAN

    Yes

    Yes

    • forced roaming on link down with IWLAN

    Yes

    Yes

    • WDS

    Yes

    Yes

    Protocol is supported

     

     

    • Address Resolution Protocol (ARP)

    Yes

    Yes

    • ICMP

    Yes

    Yes

    • Telnet

    Yes

    Yes

    • HTTP

    Yes

    Yes

    • HTTPS

    Yes

    Yes

    • TFTP

    Yes

    Yes

    • DCP

    Yes

    Yes

    • LLDP

    Yes

    Yes

    Identification & maintenance function

     

     

    • I&M0 - device-specific information

    Yes

    Yes

    • I&M1 – higher-level designation/location designation

    Yes

    Yes

    Product functions Diagnosis

     

     

    Product function

     

     

    • PROFINET IO diagnosis

    Yes

    Yes

    • Link Check

    No

    No

    • connection monitoring IP-Alive

    No

    No

    • localization via Aeroscout

    Yes

    Yes

    • SysLog

    Yes

    Yes

    Protocol is supported

     

     

    • SNMP v1

    Yes

    Yes

    • SNMP v2

    Yes

    Yes

    • SNMP v3

    Yes

    Yes

    Product functions VLAN

     

     

    Product function

     

     

    • function VLAN with IWLAN

    Yes

    Yes

    Product functions DHCP

     

     

    Product function

     

     

    • DHCP client

    Yes

    Yes

    • in Client Mode DHCP server via LAN

    Yes

    Yes

    • DHCP Option 82

    Yes

    Yes

    Product functions Redundancy

     

     

    Protocol is supported

     

     

    • STP/RSTP

    Yes

    Yes

    • MSTP

    Yes

    Yes

    • RSTP

    Yes

    Yes

    Product functions Security

     

     

    Product function

     

     

    • ACL - MAC-based

    Yes

    Yes

    • Management security, ACL-IP based

    Yes

    Yes

    • IEEE 802.1x (radius)

    Yes

    Yes

    • NAT/NAPT

    No

    No

    • access protection according to IEEE802.11i

    Yes

    Yes

    • WPA/WPA2

    Yes

    Yes

    • TKIP/AES

    Yes

    Yes

    Protocol is supported

     

     

    • SSH

    Yes

    Yes

    • RADIUS

    Yes

    Yes

    Product functions Time

     

     

    Protocol is supported

     

     

    • NTP

    Yes

    Yes

    • SNTP

    Yes

    Yes

    • SIMATIC Time

    Yes

    Yes

    Standards, specifications, approvals

     

     

    Standard

     

     

    • for FM

    FM 3611: Class I, Division 2, Groups A,B,C,D, T4 / Class 1, Zone 2, Group IIC, T4

    FM 3611: Class I, Division 2, Groups A,B,C,D, T4 / Class 1, Zone 2, Group IIC, T4

    • for hazardous zone

    EN 60079-15:2005, EN 60079-0:2006, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X

    EN 60079-15:2005, EN 60079-0:2006, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X

    • for safety from CSA and UL

    UL 60950-1 CSA C22.2 No. 60950-1

    UL 60950-1 CSA C22.2 No. 60950-1

    • for hazardous zone from CSA and UL

    ANSI/ISA 12.12.01-2013, CAN/CSA C22.2 No.213-M1987, CL. 1, Div. 2, GP. A,B,C,D, T4 / CL. 1, Zone 2, GP IIC

    ANSI/ISA 12.12.01-2013, CAN/CSA C22.2 No.213-M1987, CL. 1, Div. 2, GP. A,B,C,D, T4 / CL. 1, Zone 2, GP IIC

    Certificate of suitability

    • EC declaration of conformity

    Yes

    Yes

    • CE marking

    Yes

    Yes

    • C-Tick

    Yes

    Yes

    • CCC

    No

    No

    • E1 approval

    Yes

    Yes

    • Railway application in accordance with EN 50155

    No

    No

    • NEMA TS2

    No

    No

    • IEC 61375

    No

    No

    • IEC 61850-3

    No

    No

    • NEMA4X

    No

    No

    • Power-over-Ethernet according IEEE802.3at for type 1 and IEEE802.3af

    Yes

    Yes

    • Power-over-Ethernet according to IEEE802.3at for type 2

    Yes

    Yes

    Standard for wireless communication

     

     

    • IEEE 802.11a

    Yes

    Yes

    • IEEE 802.11b

    Yes

    Yes

    • IEEE 802.11e

    Yes

    Yes

    • IEEE 802.11g

    Yes

    Yes

    • IEEE 802.11h

    Yes

    Yes

    • IEEE 802.11i

    Yes

    Yes

    • IEEE 802.11n

    Yes

    Yes

    Wireless approval

    You will find the current list of countries at: www.siemens.de/funkzulassungen

    You will find the current list of countries at: www.siemens.de/funkzulassungen

    Marine classification association

     

     

    • American Bureau of Shipping Europe Ltd. (ABS)

    Yes

    Yes

    • Bureau Veritas (BV)

    Yes

    Yes

    • DNV GL

    Yes

    Yes

    • Lloyds Register of Shipping (LRS)

    Yes

    Yes

    • Nippon Kaiji Kyokai (NK)

    Yes

    Yes

    • Polski Rejestr Statkow (PRS)

    Yes

    Yes

    • Royal Institution of Naval Architects (RINA)

    Yes

    Yes

    Accessories

     

     

    accessories

    24 V DC screw terminal and screw terminal for digital input and output included in the scope of delivery

    24 V DC screw terminal and screw terminal for digital input and output included in the scope of delivery

    1) Wireless approval in the USA

    Дальнейшая информация

    Одобрения на использование в беспроводных сетях:

    Текущий список одобрений можно найти в Интернете по адресу:
    http://www.siemens.de/funkzulassungen

    Для выбора продуктов для промышленных беспроводных сетей можно использовать инструментальные средства "SIMATIC NET Selection Tool":

    Интерактивная версия:
    http://www.siemens.de/snst

    Автономная версия:
    http://www.siemens.de/snst-download