SIMATIC IPC277E 19 INOX PRO

Заказные данные
(2)
Аксессуары
(4)

Configured Nano-Panel PC in fully-enclosed stainless steel housing with high degree of protection for operation and visualization close to machines in the food and beverage, pharmaceutical and fine chemicals industries and in other hygienic areas.

The device has been developed on the basis of EN 1672-2 "Food processing machinery – Safety and Hygiene Requirements".

With its fully-enclosed design and optional expansion modules, the SIMATIC PRO devices are eminently suitable for industrial and machine-level use.

The INOX PRO devices feature stainless steel housing and a compact, hygienic design, and are equipped to meet the high requirements presented by the food and beverage production environment. IP66K degree of protection protects against water even with a jet strength of 100 l/min at 10 bar from a distance of 2.5 m to 3 m.

The optimized profile and minimal housing depth allow liquids to run off.

The high quality requirements in the food and beverages industry demand a high standard of the food processing machinery. There are many relevant regulations, directives, ordinances, standards and laws. Essential here is that all equipment and components are easy to clean and disinfect.

The INOX PRO devices with stainless steel front have a 240 grit hairline finish, and are thus suitably smooth to allow microorganisms to be sufficiently removed during cleaning.
On the front, the membrane covering the display cutout is tested with regard to its resistance to chemicals, has minimal grooves and gaps in which micro-organisms could settle, and also provides shatter protection for the display. The rear covers have an innovative sealing design with replaceable compression seals. This prevents liquids from seeping through.

Область применения

Food production
Slaughterhouse
Secondary packaging/cartoning, filling
Primary packaging
Pharmaceutical and cosmetics industry
Chemical industry
Life sciences

Дизайн

TFT widescreen display
Analog-resistive touch screen sensor
Stainless steel surface ground with 240 grit hairline finish
Device developed on the basis of DIN EN 1672-2
Resistant, decorative membrane tested against chemicals in accordance with DIN 42115, Part 2
Food-standard flat seal in accordance with FDA 21 CFR 177.2006
Housing material:
INOX stainless steel, material number 1.4301
Food-standard sealing material:
FPM (Fluoroelastomer)
Continuous front membrane:
Degree of protection:
Fully-enclosed IP66K
Without front operator controls
Mechanical interface:
For pedestal or support-arm mounting
Service cover for access to the interfaces, cable routing through the support system

Особенности

The INOX PRO device can be mounted either with a supporting arm or supporting foot.

Proven hygienic design for easy cleaning and disinfection
High, fully-enclosed IP66K for increased tightness and ruggedness
Food-standard sealing material and shatter protection for the display to prevent contamination of foodstuffs
Flat, optimized hygienic design allows liquids to run off
Same functionality as the comparably configured standard product
Small footprint thanks to compact, enclosed design.
Without preinstalled operator controls
Flexible implementation due to optional pedestal or support-arm mounting
Quick access to interfaces by means of the removable connection cover
Mounting kit with tube with 40 mm inside diameter permits connection to a wide range of accessories

Технические данные

	IPC277E 19" INOX PRO
Special features	Pedestal mounting	Support arm mounting
General features
Display	18.5" TFT widescreen display	18.5" TFT widescreen display
Resolution (pixels)	1 366 x 768	1 366 x 768
MTBF of backlit display (at 25°C)	50 000 h	50 000 h
Power supply	24 V DC	24 V DC
Equipment
Touch	Analog-resistive touch	Analog-resistive touch
Option	External, USB interface on rear with captive stainless steel lock	External, USB interface on rear with captive stainless steel lock
Special features	Flange adapter for pedestal	Flange adapter for support arm
Configuration / interfaces
	Based on SIMATIC IPC277E, configured (6AV7882-0EB30-2LA0)	Based on SIMATIC IPC277E, configured (6AV7882-0EB30-2LA0)
	Celeron N2930, 8 GB RAM 8 GB CFAST	Celeron N2930, 8 GB RAM 8 GB CFAST
	WES 7 SP1 64-bit, English	WES 7 SP1 64-bit, English
	Without RTX/HMI software	Without RTX/HMI software
	2 x 10/100/1000 Mbps Ethernet RJ45	2 x 10/100/1000 Mbps Ethernet RJ45
	1 x USB 3.0, 2 x USB V2.0; without serial (COM1)	1 x USB 3.0, 2 x USB V2.0; without serial (COM1)
	CFAST slot	CFAST slot
Enclosure
Front	Stainless steel 1.4301, polyester-based membrane	Stainless steel 1.4301, polyester-based membrane
Material	Stainless steel 1.4301	Stainless steel 1.4301
Surface	Hairline finish, 240 grit abrasive grain	Hairline finish, 240 grit abrasive grain
Device seals	FPM, molded parts, replaceable	FPM, molded parts, replaceable
Special features	Decorative display membrane; without USB port on front	Decorative display membrane; without USB port on front
Ambient conditions
Degree of protection, fully-enclosed	IP66K, enclosure type 4 and 4x (indoor use only)	IP66K, enclosure type 4 and 4x (indoor use only)
Ambient temperature during operation	0 ... +45 °C	0 ... +45 °C
Relative humidity during operation	Max. 95 %, no condensation	Max. 95 %, no condensation
Transport temperature / storage temperature / humidity	- 20°C … + 60°C / 10 % to 90 % without condensation	- 20°C … + 60°C / 10 % to 90 % without condensation
Approvals and inspections	CE, UL Hygiene inspection on the basis of EN 1672-2	CE, UL Hygiene inspection on the basis of EN 1672-2
Approvals (planned)	RCM (previously C-Tick)/KC/CUL	RCM (previously C-Tick)/KC/CUL
Sector	Food & beverages, pharmaceuticals industry, cosmetics industry, fine chemicals, other hygiene areas	Food & beverages, pharmaceuticals industry, cosmetics industry, fine chemicals, other hygiene areas
Dimensions
External dimensions (W x H x D in mm)	544 x 430.7 x 136	544 x 430.7 x 136
Depth of enclosure only (without flange and operator controls) in mm	80	80
Weight, net	15.5 kg	15.5 kg
Special features	Flange adapter for pedestal	Flange adapter for support arm

Дальнейшая информация

Note:

Customized modifications

Customized design (logo, type designation and membrane color)
More display sizes
Further certificates and approvals

Quotation preparation

SIMATIC HMI specialists define the product modifications precisely in accordance with customer requirements. The quotation is then prepared with:

Non-recurring costs
Prototype costs
Serial device prices and
the general conditions in the form of a product agreement (e.g. minimum quantity).
The defined device can then be ordered easily using this product agreement and a customized order number.

Further information can be found on the Internet at:

http://www.siemens.com/inox-pro-hmi-devices