RF685R

• Заказные данные
  (4)
• Аксессуары
  (11)
• Информационные материалы

  Информационные материалы

  The high-performance SIMATIC RF685R reader has a built-in adaptive antenna and a connection for an external antenna. This enables single reading stations with one or two antennas or two logical reading stations to be implemented for reading on conveyor systems. The high radiated power of up to 2 W ERP / 4 W EIRP (dependent on antenna and cable) permits long ranges. The high degree of protection (IP65) of the overall system enables problem-free use, even under the most difficult environmental conditions.

  One special feature of the RF685R is the integrated adaptive antenna. Thanks to their variable polarization, they can achieve high reading rates, even in areas with poor radio reception. In addition, project planning and spare parts inventory management are considerably simplified. For individual reading points along a production line, the RF685R is the ideal choice of device.

  The integrated processing logic of the reader enables numerous functions of the higher-level software layers to be executed in the device itself. If necessary, the digital outputs for signaling functions are automatically controlled. The advantage of the SIMATIC RF685R is that its intelligence considerably reduces the cost for additional software modules (RFID middleware). Configuration, commissioning and diagnosis is performed via an easy-to-use Web interface that can be operated with a standard Internet browser. Access to the user interface data is also possible via the TIA Portal. The reader supports commissioning, such as the orientation of the antenna(s), or determining the radiant power required by means of corresponding software tools and the extended LED display.

  A variety of diagnostic displays, such as the live radio signal diagram or the diagnostic logbook considerably simplifies and speeds up troubleshooting.

  Data communication in the RF685R is executed either via an XML protocol with TCP/IP or via an S7 protocol via Profinet. Two Ethernet interfaces are available for data and diagnostics, of which one has Profinet capability.

  The digital inputs and outputs (DI/DO) are used for simple process interfacing (sensors, actuators). The digital I/Os can be mapped directly into the IO image of a SIMATIC controller.

  All antennas of the RF600 series are supported.

  Note:
  If the reader is used together with the ASM 456 communication module, be aware that only one reader can be connected to this communication module at a time. Two connected readers would exceed the maximum permissible power consumption.

  Область применения

  The SIMATIC RF685R stationary UHF reader is ideally suited for applications along a production line or for reading points that can be implemented with two antennas at maximum.
  The SIMATIC RF685R supports the established EPCglobal Class 1, Gen 2 standard and is offered in four versions:

  • ETSI for Europe
  • FCC for USA/Canada
  • CMIIT for China
  • ARIB for Japan

  Чертеж

  

  SIMATIC RF685R reader

  Технические данные

  Order number		6GT2811-6CA10-2AA0	6GT2811-6CA10-1AA0	6GT2811-6CA10-0AA0
  Product type designation		Reader RF685R CMIIT	Reader RF685R FCC	Reader RF685R ETSI
  Suitability for operation		RF600 transponder, for direct connection to Ethernet/PROFINET or PROFIBUS via communication module	RF600 transponder, for direct connection to Ethernet/PROFINET or PROFIBUS via communication module	RF600 transponder, for direct connection to Ethernet/PROFINET or PROFIBUS via communication module
  Wireless frequencies
  Operating frequency		920 ... 925 MHz	902 ... 928 MHz	865 ... 868 MHz
  Transmit power		3 ... 2 000 mW	3 ... 2 000 mW	3 ... 2 000 mW
  Effective radiant power
  ● for each external antenna maximum		2 000 mW		2 000 mW
  ● minimum		10 mW		10 mW
  ● maximum		2 000 mW		2 000 mW
  Equivalent isotropically radiated power
  ● for each external antenna maximum			4 000 mW
  ● minimum			10 mW
  ● maximum			4 000 mW
  Electrical data
  Range maximum		8 m; Observe system manual RF600: Overreaches are possible, range is dependent on transponder type: observe http://support.automation.siemens.com/WW/view/en/67384964	8 m; Observe system manual RF600: Overreaches are possible, range is dependent on transponder type: observe http://support.automation.siemens.com/WW/view/en/67384964	8 m; Observe system manual RF600: Overreaches are possible, range is dependent on transponder type: observe http://support.automation.siemens.com/WW/view/en/67384964
  Protocol with radio transmission		EPCglobal Class 1 Gen 2 / ISO 18000-6B/-6C	EPCglobal Class 1 Gen 2 / ISO 18000-6B/-6C	EPCglobal Class 1 Gen 2 / ISO 18000-6B/-6C
  Transfer rate with radio transmission maximum		300 kbit/s	300 kbit/s	300 kbit/s
  Product feature multitag-capable		Yes	Yes	Yes
  Polarization		linear, circular, auto	linear, circular, auto	linear, circular, auto
  Transmission time for user data
  ● for write access per byte typical		2 ms	2 ms	2 ms
  ● for read access per byte typical		0.15 ms	0.15 ms	0.15 ms
  Interfaces
  Number of external antennas		1	1	1
  Standard for interfaces for communication		Ethernet/PROFINET, RS422	Ethernet/PROFINET, RS422	Ethernet/PROFINET, RS422
  Type of electrical connection
  ● for external antenna(s)		RP-TNC	RP-TNC	RP-TNC
  ● for supply voltage		M12, 8-pin, connector	M12, 8-pin, connector	M12, 8-pin, connector
  ● for communications interface		2 x M12 4-pin D-coded, M12 8-pin (RS422)	2 x M12 4-pin D-coded, M12 8-pin (RS422)	2 x M12 4-pin D-coded, M12 8-pin (RS422)
  ● at the digital inputs/outputs		M12, 12-pin, female connector	M12, 12-pin, female connector	M12, 12-pin, female connector
  Number of digital inputs		4	4	4
  Number of digital outputs		4	4	4
  Mechanical data
  Material		Aluminum, Pocan	Aluminum, Pocan	Aluminum, Pocan
  Color		silver, TI-Grey	silver, TI-Grey	silver, TI-Grey
  Mounting distance relating to metal surfaces recommended minimum		0 mm	0 mm	0 mm
  Supply voltage, current consumption, power loss
  Supply voltage
  ● at DC Rated value		24 V	24 V	24 V
  ● at DC		20 ... 30 V	20 ... 30 V	20 ... 30 V
  Consumed current at DC at 24 V
  ● typical		0.38 A	0.38 A	0.38 A
  ● maximum		2 A	2 A	2 A
  Permitted ambient conditions
  Ambient temperature
  ● during operation		-25 ... +55 °C	-25 ... +55 °C	-25 ... +55 °C
  ● during storage		-40 ... +85 °C	-40 ... +85 °C	-40 ... +85 °C
  ● during transport		-40 ... +85 °C	-40 ... +85 °C	-40 ... +85 °C
  Ambient condition for operation		With operating temperature below -20 °C: Warming-up time at least 10 minutes	With operating temperature below -20 °C: Warming-up time at least 10 minutes	With operating temperature below -20 °C: Warming-up time at least 10 minutes
  Protection class IP		IP65	IP65	IP65
  Shock resistance		EN 60068-2-27, EN 60068-2-6	EN 60068-2-27, EN 60068-2-6	EN 60068-2-27, EN 60068-2-6
  Shock acceleration		500 m/s²	500 m/s²	500 m/s²
  Vibrational acceleration		200 m/s²	200 m/s²	200 m/s²
  Design, dimensions and weight
  Width		258 mm	258 mm	258 mm
  Height		258 mm	258 mm	258 mm
  Depth		80 mm	80 mm	80 mm
  Net weight		2.47 kg	2.47 kg	2.47 kg
  Mounting type		Vesa 100 with 4 x M4 screws, top-hat rail 35 mm, profile rail S7-300, S7-1200 or S7-1500	Vesa 100 with 4 x M4 screws, top-hat rail 35 mm, profile rail S7-300, S7-1200 or S7-1500	Vesa 100 with 4 x M4 screws, top-hat rail 35 mm, profile rail S7-300, S7-1200 or S7-1500
  Cable length
  ● of antenna cable minimum		1 m	1 m	1 m
  ● of antenna cable maximum		40 m	40 m	40 m
  Product properties, functions, components general
  Display version		two LED rows with 8 and 9 LEDs	two LED rows with 8 and 9 LEDs	two LED rows with 8 and 9 LEDs
  Product feature silicon-free		Yes	Yes	Yes
  Standards, specifications, approvals
  Certificate of suitability		RaWireless according to CMIIT	Wireless according to FCC, IC (Canada), cULus	Wireless according to R&TTE guideline, CE, IEC 60950
  MTBF		29 y	29 y	29 y
  Accessories
  accessories		one external antenna, set for mounting on top-hat rail or profile rail	one external antenna, set for mounting on top-hat rail or profile rail	one external antenna, set for mounting on top-hat rail or profile rail