Ordering of engineering software, information

• Заказные данные
  (16)
• Информационные материалы

  Информационные материалы

  Scope of supply

  SIMOTION SCOUT engineering software (including SCOUT TIA)

  • SIMOTION SCOUT/SCOUT TIA software
  • License for SIMOTION SCOUT/SCOUT TIA
  • Integrated STARTER commissioning tool

  Optional packages for SIMOTION SCOUT

  • Optional CamTool package without license
    The license must be ordered separately.
  • Optional Drive Control Chart (DCC) package without license
    The license must be ordered separately; DCC cannot be used with SCOUT TIA (SIMOTION in the TIA Portal).

  Documentation

  • Complete SIMOTION documentation on DVD

  Other software

  • SIMOTION – Utilities & Applications
    Free utilities (e.g. calculation tools, optimization tools, etc.) and application examples (ready-to-apply solutions such as winders, cross cutters or handling) as well as the project generator SIMOTION easyProject
  • SIMATIC software:
    A suitable STEP 7 package or TIA Portal Framework must be purchased separately for use with SCOUT.
    The necessary components of STEP 7 for SIMOTION are integrated in SCOUT stand-alone.

  SCOUT V4.5 in the STEP 7 environment (SIMATIC Manager)

  Software requirements

  • Windows 7 Professional or Ultimate (32/64 bit)
  • SIMATIC STEP 7 V5.5 SP4 (not required for SCOUT stand-alone)

  Hardware requirements

  Minimum system requirements PG/PC for SCOUT:

  • As of Pentium V 1.5 GHz, 2 GB RAM (4 GB recommended)
  • Screen resolution: 1024 × 768 pixels, 16-bit color depth
  • Free hard disk memory: 3 GB

  For an installation of WinCC flexible (ES) integrated in SCOUT, a main memory of 4 GB RAM is recommended.

  Use of a programming device or a PC with conventional performance capacity is recommended for processing extensive SIMOTION projects with several modules:

  • PG or PC with Intel® CoreTM i5-3320M, 3.3 GHz or higher, or a comparable device
  • Windows 7 64 bit, 8 GB RAM
  • Screen resolution: 1920 × 1080 pixels, 32-bit color depth

  SCOUT TIA V4.5 (SIMOTION in the TIA Portal)

  SCOUT TIA always requires that a TIA Portal Framework is installed beforehand using another TIA Portal client (such as: STEP 7, WinCC, Startdrive).

  We recommend that the latest update for TIA Portal is always installed.

  System requirements for SIMOTION SCOUT TIA V4.5

  The system requirements of the TIA Portal or its client (e.g. STEP 7, WinCC, Startdrive) are applicable, because SCOUT TIA can only be installed in parallel with these. Any deviating requirements are described in the currently valid readme file.

  Дальнейшая информация

  Important information about SCOUT, SCOUT stand-alone and SCOUTTIA:

  The following engineering packages are available to order:

  • SIMOTION SCOUT: this version can be used only if STEP 7 (SIMATIC Manager) is already installed
  • SIMOTION SCOUT stand-alone: this version can be used if STEP 7 (SIMATIC MANAGER) is not installed.

  Both delivery versions also include SIMOTION SCOUT TIA as an optional package for the TIA Portal.

  The SCOUT license as well as the SCOUT stand-alone license is valid for SCOUT TIA.

  SCOUT stand-alone also includes the components of STEP 7 that are required for SIMOTION SCOUT (SIMATIC CPUs cannot be programmed).

  Users who switch over from SCOUT stand-alone to SCOUT (or vice versa) must install new software for the relevant SCOUT version and purchase a new license (the license for SCOUT and SCOUT stand-alone are different).

  It is not possible to install SCOUT and SCOUT stand-alone "side by side" on the same PC.
  It is possible to install SCOUT TIA and SCOUT (or SCOUT standalone) "side by side" on the same PC if the software version is V4.4 or higher. Only one single SCOUT license is required for "side-by-side" installations.

  Compatibility list ofsoftware products in the SIMOTION environment

  A number of additional software products can be used in conjunction with SIMOTION SCOUT. It must be ensured that the corresponding versions of these software products are compatible. Please consult the Compatibility list of software products in the SIMOTION environment.

  http://support.automation.siemens.com/WW/view/en/18857317

  SIMOTION Kernel updates

  SIMOTION Kernel updates for all SIMOTION platforms are supplied on SCOUT DVDs and can then be copied from the PG/PC to the SIMOTION Micro Memory Card (SIMOTION C) or SIMOTION CompactFlash card (SIMOTION D) or installed on SIMOTION P320-4.

  A PC card adapter is needed to write to the SIMOTION MMC (Micro Memory Card) or the SIMOTION CF (CompactFlash card). Adapters can usually be found in PC shops and at electronics shops.

  With the device update tool, SIMOTION offers a user-friendly solution to update SIMOTION devices. SIMOTION D4x5-2 can also be updated using a USB stick.