SIMATIC Industrial Thin Client INOX

Заказные данные
(1)

SIMATIC ITC1900 INOX

The Industrial Thin Client with touch screen and stainless steel front is designed for use in the food and beverage industry, the pharmaceuticals industry, fine chemicals and in other hygiene areas for machine-level operator control and monitoring. For this reason, the devices with stainless steel front have been developed in compliance with DIN EN 1672-2 "Food processing machinery – Safety and Hygiene Requirements".

Дизайн

TFT widescreen display
External dimensions and mounting cutout as for corresponding standard product
Optimized frame profile with limited projection of the device from the cabinet
IP66K degree of protection at the front
Stainless steel surface ground with 240 grit hairline finish
Minimal grooves and gaps
Decorative membrane tested against chemicals, over whole display
Display shatter protection
Food-standard seals
Rear clamping frame for even seal application pressure

Особенности

With low installation depth and rugged front, the SIMATIC ITCs are eminently suitable for industrial and machine-level use.

The ITC with stainless steel front is also even better equipped to meet the high requirements presented by the food and beverage production environment. IP66K degree of protection protects against water even with a jet strength of 100 l/min at 10 bar from a distance of 2.5 m to 3 m.

The optimized frame profile and almost flush-mounting of the device on the control cabinet allow liquids to run off.

The high quality requirements in the food and beverages industry require a high standard when it comes to the food processing machinery. There are many relevant regulations, directives, ordinances, standards and laws. It is essential here is that all equipment and components are easy to clean and disinfect so that cross-contamination of foodstuffs can be avoided.

The ITC with stainless steel front has a 240 grit hairline finish, so it is suitably smooth. The membrane covering the display cutout is tested with regard to its resistance to chemicals, has minimal grooves and gaps in which micro-organisms could settle, and also provides shatter protection for the display.

Simpler cleaning thanks to resistant and rugged stainless steel front with smooth surface and minimal grooves and gaps
High IP66K degree of protection on the front for increased tightness of seal and ruggedness
Food-standard sealing material and shatter protection for the display to prevent contamination of foodstuffs
Optimized frame design with small projection distances from the control cabinet and for self-draining of liquids
Device front developed on the basis of DIN EN 1672-2
Decorative membrane tested against chemicals in accordance with DIN 42115, Part 2
Food-standard flat seal in accordance with FDA 21 CFR 177.2006
Rear clamping frame ensures even application pressure of the seal
External dimensions, mounting cutout and functionality as for corresponding standard product

Технические данные

	SIMATIC ITC1900 INOX (the other specifications correspond to the SIMATIC ITC1900)
General features
Display	18.5" TFT widescreen display
Resolution (pixels)	1366 x 768
MTBF of backlighting (at 25 °C)	approx. 50 000 h
Power supply	24 V DC
Front
Material	Stainless steel 1.4301, polyester-based membrane
Surface	Hairline finish, 240 grit abrasive grain
Device seal	EPDM, molded part
Special features	Decorative membrane drawn across the display
Environmental conditions
Degree of protection	At the front: IP66K, enclosure type 4 and 4x (indoor use only) At the rear: IP20
Ambient temperature in operation	0 ... 45 °C
Relative humidity	max. 70 % (no condensation)
Transport/storage temperature	-20 °C … +45 °C
Approvals	CE, C-Tick, KC, cUL, CFM
Industry	Food & beverages, pharmaceuticals industry, other hygiene areas
Dimensions
External dimensions (W x H x D in mm)	483 x 337
Mounting cutout (W x H x D in mm)	465 x 319
Mounting depth, in mm	74
Weight	approx. 6.5 kg
Special features	INOX clamping frame, cast aluminum mounting clamp

Please note the ambient conditions that differ from those of the SIMATIC.

Дальнейшая информация

Customer-specific modifications

Customized design (logo, type designation and membrane color)
Protection against condensation and corrosive gases

Quotation preparation

Customized automation specialists define the product modifications precisely in accordance with customer requirements.

The quotation is then prepared with:

Non-recurring costs,
Prototype costs,
Serial device prices and
the general conditions in the form of a product agreement (e.g. minimum quantity).

The defined device can then be ordered easily using this product agreement and a customer-specific order number.