SIPLUS S7-400 CPU 416H

Заказные данные
(1)
Аксессуары
(21)

CPU for SIPLUS S7-400H
Usable in high-availability systems such as the S7-400H
With integrated PROFIBUS DP master and combined MPI/PROFIBUS DP master interface
With integrated PROFINET interface (2-port switch)
Features 2 slots for sync modules

Note:

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme specific information was added.

Область применения

The CPU 416-5H can be used for SIMATIC S7-400H.

The integrated PROFIBUS DP interfaces enable direct connection as master to the PROFIBUS DP fieldbus.

The integrated PROFINET interface with switch functionality forms the basis for providing 2 externally accessible PROFINET ports. In this way, linear or ring structures can be implemented.

Дизайн

The CPU 416-5H has:

A powerful processor:
The CPU achieves command execution times as low as 12.5 ns per binary command.
16 MB RAM (6 MB for programs, 10 MB for data):
Load memory for user programs and configuration data for the S7-400H automation system; Fast main memory for subroutines of the user program that are relevant to the process.
A memory card:
For expanding the integrated load memory. In addition to the program itself, the information contained in the load memory also includes configuration data for the S7-400H, which is why it takes up twice as much space in the memory. The result is that:
- The integrated load memory is not sufficient for large programs, which is why the memory card is often required.
  RAM and FEPROM cards are available (FEPROM for saving data even when power supply is disconnected).
Flexible expansion options:
Up to 262 144 digital and 16 384 analog inputs/outputs.
Multi-point interface MPI:
The MPI enables the creation of a simple network with up to 32 nodes and a data transfer rate of 187.5 kbit/s. The CPU can establish up to 64 connections to nodes on the communication bus (C bus) and the MPI.
Note:
If PROFIBUS DP and MPI interfaces are being used simultaneously, only the following bus connectors can be connected to the MPI interface:
- With socket: 6ES7 972-0BB42-0XA0
- Without socket: 6ES7 972-0BA42-0XA0
PROFIBUS DP interface:
The PROFIBUS DP interface allows a redundant, distributed automation configuration offering high speed and ease of use. From the user's point of view, the distributed I/Os are treated like centralized I/Os (same configuring, addressing and programming).
PROFINET interface with 2 ports (switch):
Support of system redundancy and MRP (Media Redundancy Protocol)
Mode selector:
Designed as a toggle switch.
Diagnostics buffer:
The last 120 alarm and interrupt events are stored in a ring buffer for diagnostic purposes.
Real-time clock:
Diagnostics reports from the CPU are provided with the date and time.
PROFIBUS DP interface:
The CPU 416-5H with PROFIBUS DP master interface enables distributed automation to be established at high speed and with easy operation. From the user's point of view, the distributed I/Os are treated like centralized I/Os (same configuring, addressing and programming).
Note:
If PROFIBUS DP and MPI interfaces are being used simultaneously, only the following bus connectors can be connected to the MPI interface:
- With socket: 6ES7 972-0BB42-0XA0
- Without socket: 6ES7 972-0BA42-0XA0

Функции

Block protection:
In addition to the keyswitch, a password concept protects the user program from unauthorized access. User blocks can also be protected by an encryption mechanism.
Integrated HMI services:
For HMI devices, the user only has to specify the source and destination for the data. They are then automatically transported by the system on a cyclic basis.
Integrated communication functions:
- PG/OP communication
- Extended communication (standard and high-availability)
Master-spare switchover programmed by user

Parameterizable attributes

With the STEP 7 "Hardware Configuration" tool and the installed S7-400H option package, the properties and behavior of the S7-400H including the CPUs can be parameterized, e.g.:

MPI multi-point interface:
- Determination of node addresses
- Start-up/cyclic response
- Determination of maximum cycle time and communication load
Address assignment:
Addressing of I/O modules
Retentive areas:
Determination of number of retentive bit memories, counters, timers, data blocks and clock memories
Protection level:
Specifying the access rights to programs and data
System diagnostics:
Determination of handling and scope of diagnostic alarms
Cyclic interrupts:
Setting of periodicity
Configuration of H stations

Display and information functions

Status and error LEDs:
LEDs indicate, for example, internal and external faults and operating statuses such as RUN, STOP, startup and "Master" operating mode as well as redundancy errors and test functions.
Test functions:
The PG is used to indicate signal states during program execution, to modify process variables independently of the user program, to output the contents of stack memories, to execute individual program steps, and to block program sections.
Information functions:
The PG can be used to obtain information about the memory capacity and operating mode of the CPU and the current loading of the work and load memory.

Технические данные

Order number		6AG1416-5HS06-7AB0
		SIPLUS S7-400 CPU 416-5H
General information
Product type designation		CPU 416-5H PN/DP
Engineering with
● Programming package		As of STEP 7 V5.5 SP2 with HF1
Supply voltage
Rated value (DC)
● 24 V DC		No; Power supply via system power supply
Power loss
Power loss, typ.		7.5 W
Memory
Work memory
● integrated		16 Mbyte
● integrated (for program)		6 kbyte
● integrated (for data)		10 kbyte
Load memory
● expandable FEPROM, max.		64 Mbyte
● integrated RAM, max.		1 Mbyte
● expandable RAM, max.		64 Mbyte
CPU processing times
for bit operations, typ.		12.5 ns
for word operations, typ.		12.5 ns
for fixed point arithmetic, typ.		12.5 ns
for floating point arithmetic, typ.		25 ns
Counters, timers and their retentivity
S7 counter
● Number		2 048
IEC counter
● present		Yes
S7 times
● Number		2 048
IEC timer
● present		Yes
Data areas and their retentivity
Flag
● Number, max.		16 384 byte
Address area
I/O address area
● Inputs		16 kbyte
● Outputs		16 kbyte
Process image
● Inputs, adjustable		8 kbyte
● Outputs, adjustable		8 kbyte
Time of day
Clock
● Hardware clock (real-time)		Yes
Operating hours counter
● Number		16
Interfaces
Number of RS 485 interfaces		2
Number of other interfaces		2; Fiber-optic interface
1. Interface
Interface type		Integrated
Physics		RS 485 / PROFIBUS + MPI
Functionality
● MPI		Yes
● PROFIBUS DP master		Yes
● PROFIBUS DP slave		No
DP master
● Number of DP slaves, max.		32
2. Interface
Interface type		PROFINET
Physics		Ethernet RJ45
Interface types
● Number of ports		2
Functionality
● PROFINET IO Controller		Yes
● PROFINET IO Device		No
● PROFINET CBA		No
● PROFIBUS DP master		No
● PROFIBUS DP slave		No
3. Interface
Interface type		Integrated
Physics		RS 485 / PROFIBUS
Functionality
● PROFIBUS DP master		Yes
● PROFIBUS DP slave		No
DP master
● Number of DP slaves, max.		125
4. Interface
Interface type		Pluggable synchronization submodule (FO)
Plug-in interface modules		Synchronization modules 6ES7960-1AA06-0XA0 or 6ES7960-1AB06-0XA0
5. Interface
Interface type		Pluggable synchronization submodule (FO)
Plug-in interface modules		Synchronization modules 6ES7960-1AA06-0XA0 or 6ES7960-1AB06-0XA0
Isochronous mode
Isochronous operation (application synchronized up to terminal)		No
Communication functions
PG/OP communication		Yes
Data record routing		Yes
S7 routing		Yes
Global data communication
● supported		No
S7 basic communication
● supported		No
S7 communication
● supported		Yes
S5 compatible communication
● supported		Yes; (via CP max. 10 and FC AG_SEND and FC AG_RECV)
Standard communication (FMS)
● supported		Yes; Via CP and loadable FB
Open IE communication
● TCP/IP		Yes; via integrated PROFINET interface and loadable FBs
— Number of connections, max.		94
● ISO-on-TCP (RFC1006)		Yes; Via integrated PROFINET interface or CP 443-1 and loadable FBs
— Number of connections, max.		94
● UDP		Yes; via integrated PROFINET interface and loadable FBs
— Number of connections, max.		94
Web server
● supported		No
Number of connections
● overall		96
Ambient conditions
Ambient temperature during operation
● min.		-25 °C; = Tmin
● max.		70 °C; = Tmax; @ 60°C for UL/ATEX/FM and safety-related application
Ambient temperature during storage/transportation
● min.		-40 °C
● max.		70 °C
Extended ambient conditions
● relative to ambient temperature-atmospheric pressure-installation altitude		Tmin ... Tmax at 1 080 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax - 20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m). For "F-Systems" applications max. +2 000 m above sea level permissible
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3		Yes; Class 3C4 incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Configuration
Know-how protection
● User program protection/password protection		Yes
● Block encryption		Yes; With S7 block Privacy
Dimensions
Width		50 mm
Height		290 mm
Depth		219 mm
Weights
Weight, approx.		995 g