Товаров
  
корзина пуста
  • Каталог оборудования Siemens
Приводная техника
›
Преобразователи
›
Стандартные преобразователи
›
Высокопроизводительные преобразователи SINAMICS S
›
SINAMICS S120
›
Силовые модули
›
Air-cooled Power Modules in blocksize format

Air-cooled Power Modules in blocksize format

  • Заказные данные
    (104)
  • Информационные материалы

    Дизайн

    PM240‑2 Power Modules, frame sizes FSA to FSF (with Control Unit and Operator Panel)

    The PM240‑2 Power Modules in blocksize format feature the following connections and interfaces as standard:

    • Line supply connection
    • PM-IF interface for connection of the PM240‑2 Power Module and CU310-2/SIMOTION D410-2 Control Unit or CUA31/CUA32 Control Unit Adapter. The PM240‑2 Power Module also supplies power to the CU310‑2/SIMOTION D410‑2 Control Unit or CUA31/CUA32 Control Unit Adapter by means of an integrated power supply
    • Terminals DCP/R1 and R2 for connection of an external braking resistor
    • Motor connection using screw terminals or screw studs
    • Control circuit for the Safe Brake Relay for controlling a holding brake
    • 2 PE/protective conductor connections

    Power Modules without integrated line filter can be connected to grounded TN/TT systems and non-grounded IT systems. Power Modules with integrated line filter are suitable only for connection to TN systems with grounded neutral.

    The integrated Braking Module is rated with the capability to continuously utilize the external braking resistor. The temperature of the external braking resistor must be monitored to provide protection against thermal overloading.

    Push-through variant

    The push-through variant allows the cooling fins of the Power Module to be pushed through the rear panel of the control cabinet. Push-through versions should be used in applications where the amount of power loss generated inside the control cabinet itself must be minimized.

    Shield plates and shield connection kits are available. These can be used in the wiring installation for the Control Units and Power Modules to ensure that it complies with EMC guidelines.

    Additional options

    Further selected accessories are available from Siemens Solution Partners.

    Please select "Drive Options" as the technology in the "Solution Partner Finder":

    http://www.siemens.com/automation/partnerfinder

    Характеристика

    Overload capability

    300 s duty cycle based on low overload

    300 s duty cycle based on high overload

    Duty cycle with previous load

    Duty cycle without previous load

    S6 duty cycle with previous load with a duty cycle duration of 600 s

    S6 duty cycle with previous load with a duty cycle duration of 60 s

    Duty cycle with 60 s overload with a duty cycle duration of 300 s

    Duty cycle with 30 s overload with a duty cycle duration of 300 s

    Derating data

    Pulse frequency

    Type rating 1)
    at 50 Hz 200 V 1 AC/3 AC

    Rated output current in A

    for a pulse frequency of

    kW

    hp

    4 kHz

    6 kHz

    8 kHz

    10 kHz

    12 kHz

    14 kHz

    16 kHz

    0.55

    0.75

    3.2

    2.6

    2.1

    1.8

    1.5

    1.4

    1.2

    0.75

    1

    4.2

    3.3

    2.7

    2.3

    2

    1.8

    1.6

    1.1

    1.5

    6

    4.7

    3.9

    3.3

    2.8

    2.5

    2.2

    1.5

    2

    7.4

    6.3

    5.2

    4.4

    3.7

    3.3

    3

    2.2

    3

    10.4

    8.8

    7.3

    6.2

    5.2

    4.7

    4.2

    3

    4

    13.6

    11.6

    9.5

    8.2

    6.8

    6.1

    5.4

    4

    5

    17.5

    14.9

    12.3

    10.5

    8.8

    7.9

    7

    5.5

    7.5

    22

    18.7

    15.4

    13.2

    11

    9.9

    8.8

    7.5

    10

    28

    23.8

    19.6

    16.8

    14

    12.6

    11.2

    11

    15

    42

    35.7

    29.4

    25.2

    21

    18.9

    16.8

    15

    20

    54

    45.9

    37.8

    32.4

    27

    24.3

    21.6

    18.5

    25

    68

    57.8

    47.6

    40.8

    34

    30.6

    27.2

    22

    30

    80

    68

    56

    48

    40

    36

    32

    30

    40

    104

    88.4

    72.8

    62.4

    52

    46.8

    41.6

    37

    50

    130

    110.5

    91

    –

    –

    –

    –

    45

    60

    154

    130.9

    107.8

    –

    –

    –

    –

    55

    75

    178

    151.3

    124.6

    –

    –

    –

    –



    1) Type rating based on the rated output currentIrated. The rated output current Irated is based on the duty cycle for low overload (LO).

     

    Type rating 1)
    at 50 Hz 400 V 3 AC

    Rated output current in A

    for a pulse frequency of

    kW

    hp

    2 kHz

    4 kHz

    6 kHz

    8 kHz

    10 kHz

    12 kHz

    14 kHz

    16 kHz

    0.55

    0.75

    1.7

    1.7

    1.45

    1.19

    1.02

    0.85

    0.77

    0.68

    0.75

    1

    2.2

    2.2

    1.87

    1.54

    1.32

    1.1

    0.99

    0.88

    1.1

    1.5

    3.1

    3.1

    2.64

    2.17

    1.86

    1.55

    1.4

    1.24

    1.5

    2

    4.1

    4.1

    3.49

    2.87

    2.46

    2.05

    1.85

    1.64

    2.2

    3

    5.9

    5.9

    5.02

    4.13

    3.54

    2.95

    2.66

    2.36

    3

    4

    7.7

    7.7

    6.55

    5.39

    4.62

    3.85

    3.47

    3.08

    4

    5

    10.2

    10.2

    8.7

    7.1

    6.1

    5.1

    4.6

    4.1

    5.5

    7.5

    13.2

    13.2

    11.2

    9.2

    7.9

    6.6

    5.9

    5.3

    7.5

    10

    18

    18

    15.3

    12.6

    10.8

    9

    8.1

    7.2

    11

    15

    26

    26

    22.1

    18.2

    15.6

    13

    11.7

    10.4

    15

    20

    32

    32

    27.2

    22.4

    19.2

    16

    14.4

    12.8

    18.5

    25

    38

    38

    32.3

    26.6

    22.8

    19

    17.1

    15.2

    22

    30

    45

    45

    38.3

    31.5

    27

    22.5

    20.3

    18

    30

    40

    60

    60

    51

    42

    36

    30

    27

    24

    37

    50

    75

    75

    63.8

    52.5

    45

    37.5

    33.8

    30

    45

    60

    90

    90

    76.5

    63

    54

    45

    40.5

    36

    55

    75

    110

    110

    93.5

    77

    66

    55

    49.5

    44

    75

    100

    145

    145

    123.25

    108.75

    –

    –

    –

    –

    90

    125

    178

    178

    151.3

    133.5

    –

    –

    –

    –

    110

    150

    205

    205

    –

    –

    –

    –

    –

    –

    132

    200

    250

    250

    –

    –

    –

    –

    –

    –



    1) Type rating based on the rated output current Irated. The rated output current Irated is based on the duty cycle for low overload (LO).

     

    Type rating 1)
    at 50 Hz 690 V 3 AC

    Rated output current in A

    for a pulse frequency of

    kW

    hp

    2 kHz

    4 kHz

    6 kHz

    8 kHz

    10 kHz

    12 kHz

    14 kHz

    16 kHz

    11

    10

    14

    8.4

    –

    –

    –

    –

    –

    –

    15

    15

    19

    11.4

    –

    –

    –

    –

    –

    –

    18.5

    20

    23

    13.8

    –

    –

    –

    –

    –

    –

    22

    25

    27

    16.2

    –

    –

    –

    –

    –

    –

    30

    30

    35

    21

    –

    –

    –

    –

    –

    –

    37

    40

    42

    25.2

    –

    –

    –

    –

    –

    –

    45

    50

    52

    31.2

    –

    –

    –

    –

    –

    –

    55

    60

    62

    37.2

    –

    –

    –

    –

    –

    –

    75

    75

    80

    48

    –

    –

    –

    –

    –

    –

    90

    100

    100

    60

    –

    –

    –

    –

    –

    –

    110

    100

    115

    69

    –

    –

    –

    –

    –

    –

    132

    125

    142

    85.2

    –

    –

    –

    –

    –

    –



    1) Type rating based on the rated output current Irated. The rated output current Irated is based on the duty cycle for low overload (LO).

    Ambient temperature

    Permissible output current as a function of ambient temperature for low overload (LO) for PM240‑2 Power Modules, frame sizes FSA to FSC

    Permissible output current as a function of ambient temperature for low overload (LO) for PM240‑2 Power Modules, frame sizes FSD to FSF

    Permissible output current as a function of ambient temperature for high overload (HO) for PM240‑2 Power Modules, frame sizes FSA to FSC

    Permissible output current as a function of ambient temperature for high overload (HO) for PM240‑2 Power Modules, frame sizes FSD to FSF

    Note:

    The operating temperature ranges of the Control Units should be taken into account.

    Installation altitude

    Permissible line supplies depending on the installation altitude

    • Installation altitude up to 2000 m (6562 ft) above sea level
      • Connection to every supply system permitted for the inverter
    • Installation altitudes between 2000 m and 4000 m (6562 ft and 13124 ft) above sea level
      • Connection to a TN system with grounded neutral point
      • TN systems with grounded line conductor are not permitted
      • The TN line system with grounded neutral point can also be supplied using an isolation transformer
      • The phase-to-phase voltage does not have to be reduced

    Note:

    The connected motors, power elements and components must be considered separately.

    Permissible output current as a function of the installation altitude for PM240‑2 Power Modules

    System operating voltage

    The rated output current remains constant over the 380 V to 480 V 3 AC voltage range.

    Интеграция

    PM240‑2 Power Modules in blocksize format communicate via the PM-IF interface with

    • the CU310‑2 Control Unit
    • the SIMOTION D410-2 Control Unit
    • CUA31 or CUA32 Control Unit Adapter

    Connection diagram for PM240‑2 Power Modules, frame sizes FSA to FSC, with or without integrated line filter

    Connection diagram for PM240‑2 Power Modules, frame sizes FSD to FSF, with or without integrated line filter

    With a CUA31/CUA32 Control Unit Adapter snapped on, the PM240‑2 Power Module communicates via a DRIVE‑CLiQ connection with

    • a CU320‑2 Control Unit
    • an NCU 7.x of SINUMERIK
    • SIMOTION D4x5-2 Control Unit
    Power and DC link components that are optionally available depending on the Power Module used

    The following line-side power components, DC link components and load-side power components are optionally available in the appropriate frames sizes for the Power Modules:

     

    Frame size

     

    FSA

    FSB

    FSC

    FSD

    FSE

    FSF

    PM240-2 Power Module with integrated braking chopper

    Available frame sizes

     

     

     

     

     

     

    • 200 V versions

    ✓ 

    ✓ 

    ✓ 

    ✓ 2)

    ✓ 2)

    ✓ 2)

    • 400 V versions

    ✓ 

    ✓ 

    ✓ 

    ✓ 

    ✓ 

    ✓ 

    • 690 V versions

    –

    –

    –

    ✓ 

    ✓ 

    ✓ 

    Line-side power components

    Line filter class A

    I

    I

    I

    I 2)

    I 2)

    I 2)

    Line filter class B (only for 400 V versions)

    U 1)

    U 1)

    U 1)

    –

    –

    –

    Line reactors (only for 3 AC versions)

    S

    S

    S

    I

    I

    I

    DC link components

    Braking resistor

    S

    S

    S

    S

    S

    S

    Braking Module

    –

    –

    –

    –

    –

    –

    Load-side power components

    Output reactor

    S

    S

    S

    S

    S

    S

    Sine-wave filter

    –

    –

    –

    –

    –

    –



    U = Base component

    S = Lateral mounting

    I = Integrated

    – = Not possible

    1) Lateral mounting is the only possible option for push-through variants.

    2) PM240‑2 200 V versions, frame sizes FSD to FSF are only available without integrated line filter.

     

    General design information

    Inverter comprising a Power Module (PM), a Control Unit (CU), and base components (side view)

    • If at all possible, the line filter should be mounted directly below the inverter 1).
    • With lateral mounting, the line-side components have to be mounted on the left side of the inverter, and the load-side
      components on the right side.
    • Braking resistors have to be mounted directly on the control cabinet wall due to heating issues.
    Recommended installation combinations of the inverter and optional power and DC link components

    Power Module

    Base

    Lateral mounting

    Frame size

     

    Left of the inverter
    (for line-side power components)

    Right of the inverter
    (for load-side power components and DC link components)

    FSA to FSC

    Line filters

    Line reactor

    Output reactor and/or braking resistor

    FSD to FSF

    –

    Line filters

    Output reactor and/or braking resistor



    Технические данные

    General technical specifications

    Unless explicitly specified otherwise, the following technical specifications are valid for all PM240‑2 Power Modules in the blocksize format, FSA to FSF.

    Note:

    When engineering the complete SINAMICS S120 drive, the system data of the associated Control Units, supplementary system components, DC link components and Sensor Modules must be taken into consideration.

    Electrical specifications

    Line voltage

     

    • Blocksize format FSA ... FSC

    200 to 240 V 1 AC ±10%
    200 to 240 V 3 AC ±10%
    380 to 480 V 3 AC ±10%

    • Blocksize format FSD to FSF

    200 … 240 V 3 AC ±10 % (in operation -20 % <1 min)
    380 ... 480 V 3 AC ±10 % (in operation -20 % <1 min)
    500 … 690 V 3 AC ±10 % (in operation -20 % <1 min)

    Line system configurations

    Grounded TN/TT systems and non-grounded IT systems

    Line frequency

    47 ... 63 Hz

    Line power factor

    for a 3 AC line supply voltage and output power

     

    • Blocksize format FSA ... FSC

     

    • Fundamental power factor (cos φ1)

    >0.96

    • Total (λ)

    > 0.7 - 0.85

    • Blocksize format FSD to FSF

     

    • Fundamental power factor (cos φ1)

    > 0.98 - 0.99

    • Total (λ)

    > 0.9 - 0.92

    Electromagnetic compatibility1)

     

    • Interference immunity

    All PM240-2 Power Modules are suitable for use in both the first and second environments.

    • Interference emission acc. to EN 61800‑3 
      Second environment

     

    • For devices with integrated radio suppression interference filter

    Category C2

    • For devices with integrated radio suppression interference filter, format FSF with a line supply voltage of 690 V

    Category C3

    • For devices without integrated radio interference suppression filter with optional external radio interference filter for grounded line supplies

    Category C2
    (recommended for operation in conjunction with a residual current protective device RCD)

    • For devices without integrated radio interference suppression filter for operation on IT line supplies

    Category C4

    • Interference emission acc. to EN 61800‑3 
      First environment

    Can be used in the first environment when taking into consideration the additional secondary conditions listed in Section, EMC notes

    Overvoltage category

    acc. to IEC/EN 61800‑5‑1

    III

    Electronics power supply

    implemented as PELV circuit according to IEC/EN 61800‑5‑1

    24 V DC, -15 % +20 %
    Ground = negative pole grounded via the electronics

    Short-circuit current rating (SCCR)

    (Short Circuit Current Rating)
    Applies to industrial control cabinet installations according to NEC Article 409 or UL 508A

    100 kA
    See the recommended line-side components – the value depends on the fuses and circuit breakers used

    Rated pulse frequency

     

    • For devices with a rated voltage of 200 V 1/3 AC, 400 V 3 AC and a type rating ≤ 90 kW based on Irated

    4 kHz

    • For devices with a rated voltage of 690 V 3 AC and a type rating ≥ 110 kW based on Irated

    2 kHz

    Output voltage, max.

    Approximately 0.95 × line voltage
    (at 200 V 1 AC, approximately 0.74 × line voltage)

    Output frequency

    0 ... 550 Hz
    (dependencies on the control mode and pulse frequency must be taken into account)

    Mechanical specifications

    Type of cooling

    Internal air cooling, power units with forced air cooling using integrated fans
    External air cooling (push-through cooling) for push-through device versions

    Degree of protection

    acc. to EN 60529

    IP20

    Protection class

     

    • Line circuits with protective conductor connection according to IEC/EN 61800‑5‑1

    I

    • Electronic circuits

    Safety extra low-voltage PELV/SELV

    Touch protection

    according to EN 50274/DGUV regulation 3 when used as intended

     

    • Internal air cooling

    Forced air cooling AF to EN 60146

    • External air cooling

    Push-through cooling for push-through device versions

    Ambient conditions

     

    Storage

    Transport

    Operation

    In the product packaging

    In transport packaging

     

    Ambient temperature

    Class 1K4
    acc. to EN 60721‑3‑1
    -25 ... +55 °C (-13 ... +131 °F)

    Class 2K4
    acc. to EN 60721‑3‑2
    -40 ... +70 °C (-40 ... +158 °F)

    Class 3K3 2)
    acc. to EN 60721‑3‑3
    For operation without derating3): -10 ... +40 °C (14 ... 104 °F) (for operation with low overload)
    -10 ... +50 °C (14 ... 122 °F) (for operation with high overload)
    For operation with derating: >40 ... +60 °C (104 ... 140 °F)

    Relative humidity

    (oil mist, salt mist, ice, condensation, dripping water, spraying water and water jets are not permitted)

    Class 1K4
    acc. to EN 60721‑3‑1
    5 ... 95 %

    Class 2K3
    acc. to EN 60721‑3‑2
    5 ... 95 % at 40 °C

    Class 3K3 2)
    acc. to EN 60721‑3‑3
    5 ... 95 %

    Environmental class/harmful chemical substances

    Class 1C2
    acc. to EN 60721‑3‑1

    Class 2C2
    acc. to EN 60721‑3‑2

    Class 3C2
    acc. to EN 60721‑3‑3

    Organic/biological influences

    Class 1B1
    acc. to EN 60721‑3‑1

    Class 2B1
    acc. to EN 60721‑3‑2

    Class 3B1
    acc. to EN 60721‑3‑3

    Degree of pollution

    acc. to IEC/EN 61800‑5‑1 (condensation not permissible)

    2

    Installation altitude

     

    • For operation with low overload

    Up to 1000m (3281 ft) above sea level without derating

    • For operation with high overload

    Up to 2000 m (6562 ft) above sea level without derating

    • From 2000 m up to 4000 m (6562 ft to 13124 ft) above sea level observe the derating characteristics

    See characteristic for current derating as a function of the installation altitude and/or reduction of the ambient temperature by 3.5 K per 500 m (1640 ft)

    Mechanical strength

     

    Storage

    Transport

    Operation

    In the product packaging

    In transport packaging

     

    Vibratory load

    Class 1M2
    acc. to EN 60721‑3‑1

    Class 2M3
    acc. to EN 60721‑3‑2

    Class 3M1
    acc. to EN 60721‑3‑3
    Test values acc. to EN 60068‑2‑6

    Shock load

    Class 1M2
    acc. to EN 60721‑3‑1

    Class 2M3
    acc. to EN 60721‑3‑2

    Class 3M1
    acc. to EN 60721‑3‑3
    Test values acc. to EN 60068‑2‑27

    Certificates

    Declarations of conformity

    CE (Low Voltage, EMC and M​achinery Directives)

    Certificates of suitability

     

    • Blocksize format FSA ... FSC

    cULus according to UL 61800‑5‑1; CSA only with external surge voltage protection device; RCM; SEMI F47

    • Blocksize format FSD to FSF

    cULus acc. to UL 61800‑5‑1; CSA only with external surge voltage protection device; RCM; SEMI F47
    KCC only with internal or external line filters, Category C2; RoHS; EAC
    WEEE (Waste Electrical & Electronic Equipment)



    1) Observe the EMC notes in Section, Tools and configuring.

    2) Better than 3K3 through increased ruggedness regarding the temperature range and humidity.

    3) Also carefully observe the permissible temperatures for the Control Unit and where relevant, the operator panel (IOP or BOP‑2)

    PM240‑2 Power Modules standard variant

    Line voltage 200 ... 240 V 1 AC/3 AC

    PM240‑2 Power Modules standard variant

    Without integrated line filter

    6SL3210-1PB13-0UL0

    6SL3210-1PB13-8UL0

    6SL3210-1PB15-5UL0

    6SL3210-1PB17-4UL0

    6SL3210-1PB21-0UL0

    With integrated line filter class A

    6SL3210-1PB13-0AL0

    6SL3210-1PB13-8AL0

    6SL3210-1PB15-5AL0

    6SL3210-1PB17-4AL0

    6SL3210-1PB21-0AL0

    Output current

    at 50 Hz 230 V 1 AC

     

     

     

     

     

     

    • Rated current Irated 1)

    A

    3

    3.9

    5.5

    7.4

    10.4

    • For S6 duty (40 %) IS6

    A

    3.3

    4.3

    6.1

    8.2

    11.5

    • Base-load current IH2)

    A

    2.3

    3

    3.9

    5.5

    7.4

    • Maximum current Imax

    A

    4.6

    6

    8.3

    11.1

    15.6

    Type rating

     

     

     

     

     

     

    • Based on Irated

    kW (hp)

    0.55 (0.75)

    0.75 (1)

    1.1 (1.5)

    1.5 (2)

    2.2 (3)

    • Based on IH

    kW (hp)

    0.37 (0.5)

    0.55 (0.75)

    0.75 (1)

    1.1 (1.5)

    1.5 (2)

    Rated pulse frequency

    kHz

    4

    4

    4

    4

    4

    Efficiency η

    %

    >96

    >96

    >96

    >96

    >96

    Power loss 3)

    at rated current

    kW

    0.04

    0.04

    0.05

    0.07

    0.12

    Cooling air requirement

    m3/s (ft3/s)

    0.005 (0.18)

    0.005 (0.18)

    0.0092 (0.325)

    0.0092 (0.325)

    0.0092 (0.325)

    Sound pressure level

    LpA (1 m)

    dB

    <50

    <50

    <62

    <62

    <62

    24 V DC power supply

    for Control Unit

    A

    1

    1

    1

    1

    1

    Input current 4)

     

     

     

     

     

     

    • Rated current 1 AC/3 AC

    A

    7.5/4.3

    9.6/5.5

    13.5/7.8

    18.1/10.5

    24/13.9

    • Based on IH 1 AC/3 AC

    A

    6.6/3.8

    8.4/4.8

    11.8/6.8

    15.8/9.1

    20.9/12.1

    Line supply connection

    U1/L1, V1/L2, W1/L3

     

    Terminal connector

    Terminal connector

    Terminal connector

    Terminal connector

    Terminal connector

    • Conductor cross-section

    mm2

    1.5 ... 2.5

    1.5 ... 2.5

    1.5 ... 6

    1.5 ... 6

    1.5 ... 6

    Motor connection

    U2, V2, W2

     

    Terminal connector

    Terminal connector

    Terminal connector

    Terminal connector

    Terminal connector

    • Conductor cross-section

    mm2

    1.5 ... 2.5

    1.5 ... 2.5

    1.5 ... 6

    1.5 ... 6

    1.5 ... 6

    PE connection

     

    Included in terminal connector

    Included in terminal connector

    Included in terminal connector

    Included in terminal connector

    Included in terminal connector

    Motor cable length, max.

     

     

     

     

     

     

    • Shielded

    m (ft)

    50 (164)

    50 (164)

    50 (164)

    50 (164)

    50 (164)

    • Unshielded

    m (ft)

    100 (328)

    100 (328)

    100 (328)

    100 (328)

    100 (328)

    Degree of protection

     

    IP20

    IP20

    IP20

    IP20

    IP20

    Dimensions

     

     

     

     

     

     

    • Width

    mm (in)

    73 (2.87)

    73 (2.87)

    100 (3.94)

    100 (3.94)

    100 (3.94)

    • Height

    mm (in)

    196 (7.72)

    196 (7.72)

    291 (11.46)

    291 (11.46)

    291 (11.46)

    • Depth without operator panel

    mm (in)

    165 (6.50)

    165 (6.50)

    165 (6.50)

    165 (6.50)

    165 (6.50)

    Frame size

     

    FSA

    FSA

    FSB

    FSB

    FSB

    Weight, approx.

     

     

     

     

     

     

    • Without integrated line filter

    kg (lb)

    1.4 (3.09)

    1.4 (3.09)

    2.9 (6.39)

    2.9 (6.39)

    2.9 (6.39)

    • With integrated line filter

    kg (lb)

    1.6 (3.53)

    1.6 (3.53)

    3.1 (6.84)

    3.1 (6.84)

    3.1 (6.84)



    1) The rated output current Irated is based on the duty cycle for low overload (LO).

    2) The base-load current IH is based on the duty cycle for high overload (HO).

    3) Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

    4) The input current depends on the motor load and line impedance. The input currents apply for a load with the type rating (based on Irated) for a line impedance corresponding to uk = 1%. The current values are specified on the rating plate of the Power Module.

     

    Line voltage 200 ... 240 V 1 AC/3 AC

    PM240‑2 Power Modules standard variant

    Without integrated line filter

    6SL3210-1PB21-4UL0

    6SL3210-1PB21-8UL0

    With integrated line filter class A

    6SL3210-1PB21-4AL0

    6SL3210-1PB21-8AL0

    Output current

    at 50 Hz 230 V 1 AC

     

     

     

    • Rated current Irated 1)

    A

    13.6

    17.5

    • For S6 duty (40 %) IS6

    A

    15

    19.3

    • Base-load current IH2)

    A

    10.4

    13.6

    • Maximum current Imax

    A

    20.8

    27.2

    Type rating

     

     

     

    • Based on Irated

    kW (hp)

    3 (4)

    4 (5)

    • Based on IH

    kW (hp)

    2.2 (3)

    3 (4)

    Rated pulse frequency

    kHz

    4

    4

    Efficiency η

    %

    >96

    >96

    Power loss 3)

    at rated current

    kW

    0.14

    0.18

    Cooling air requirement

    m3/s (ft3/s)

    0.0185 (0.65)

    0.0185 (0.65)

    Sound pressure level

    LpA (1 m)

    dB

    <65

    <65

    24 V DC power supply

    for Control Unit

    A

    1

    1

    Input current 4)

     

     

     

    • Rated current 1 AC/3 AC

    A

    35.9/20.7

    43/24.8

    • Based on IH 1 AC/3 AC

    A

    31.3/18.1

    37.5/21.7

    Line supply connection

    U1/L1, V1/L2, W1/L3

     

    Terminal connector

    Terminal connector

    • Conductor cross-section

    mm2

    6 ... 16

    6 ... 16

    Motor connection

    U2, V2, W2

     

    Terminal connector

    Terminal connector

    • Conductor cross-section

    mm2

    6 ... 16

    6 ... 16

    PE connection

     

    Included in terminal connector

    Included in terminal connector

    Motor cable length, max.

     

     

     

    • Shielded

    m (ft)

    50 (164)

    50 (164)

    • Unshielded

    m (ft)

    100 (328)

    100 (328)

    Degree of protection

     

    IP20

    IP20

    Dimensions

     

     

     

    • Width

    mm (in)

    140 (5.51)

    140 (5.51)

    • Height

    mm (in)

    355 (13.98)

    355 (13.98)

    • Depth without operator panel

    mm (in)

    165 (6.50)

    165 (6.50)

    Frame size

     

    FSC

    FSC

    Weight, approx.

     

     

     

    • Without integrated line filter

    kg (lb)

    5 (11)

    5 (11)

    • With integrated line filter

    kg (lb)

    5.2 (11.5)

    5.2 (11.5)



    1) The rated output current Irated is based on the duty cycle for low overload (LO).

    2) The base-load current IH is based on the duty cycle for high overload (HO).

    3) Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

    4) The input current depends on the motor load and line impedance. The input currents apply for a load with the type rating (based on Irated) for a line impedance corresponding to uk = 1%. The current values are specified on the rating plate of the Power Module.

     

    Line voltage 200 ... 240 V 3 AC

    PM240‑2 Power Modules standard variant

    Without integrated line filter

    6SL3210-1PC22-2UL0

    6SL3210-1PC22-8UL0

    6SL3210-1PC24-2UL0

    6SL3210-1PC25-4UL0

    6SL3210-1PC26-8UL0

    With integrated line filter class A

    6SL3210-1PC22-2AL0

    6SL3210-1PC22-8AL0

    –

    –

    –

    Output current

    at 50 Hz 230 V 3 AC

     

     

     

     

     

     

    • Rated current Irated 1)

    A

    22

    28

    42

    54

    68

    • For S6 duty (40 %) IS6

    A

    24.2

    30.8

    50

    64

    81

    • Base-load current IH2)

    A

    17.5

    22

    35

    42

    54

    • Maximum current Imax

    A

    35

    44

    70

    84

    108

    Type rating

     

     

     

     

     

     

    • Based on Irated

    kW (hp)

    5.5 (7.5)

    7.5 (10)

    11 (15)

    15 (20)

    18.5 (25)

    • Based on IH

    kW (hp)

    4 (5)

    5.5 (7.5)

    7.5 (10)

    11 (15)

    15 (20)

    Rated pulse frequency

    kHz

    4

    4

    4

    4

    4

    Efficiency η

    %

    >97

    >97

    >97

    >97

    >97

    Power loss 3)

    at rated current

    kW

    0.2

    0.26

    0.42

    0.57

    0.76

    Cooling air requirement

    m3/s (ft3/s)

    0.0185 (0.65)

    0.0185 (0.65)

    0.055 (1.9)

    0.055 (1.9)

    0.055 (1.9)

    Sound pressure level

    LpA (1 m)

    dB

    <65

    <65

    45 ... 65 4)

    45 ... 65 4)

    45 ... 65 4)

    24 V DC power supply

    for Control Unit

    A

    1

    1

    1

    1

    1

    Input current 5)

     

     

     

     

     

     

    • Rated current

    A

    28.6

    36.4

    44

    56

    70

    • Based on IH

    A

    26.2

    33

    36

    43

    56

    Line supply connection

    U1/L1, V1/L2, W1/L3

     

    Terminal connector

    Terminal connector

    Screw terminals

    Screw terminals

    Screw terminals

    • Conductor cross-section

    mm2

    6 ... 16

    6 ... 16

    10 ... 35

    10 ... 35

    10 ... 35

    Motor connection

    U2, V2, W2

     

    Terminal connector

    Terminal connector

    Screw terminals

    Screw terminals

    Screw terminals

    • Conductor cross-section

    mm2

    6 ... 16

    6 ... 16

    10 ... 35

    10 ... 35

    10 ... 35

    PE connection

     

    Included in terminal connector

    Included in terminal connector

    Screw terminals

    Screw terminals

    Screw terminals

    Motor cable length, max.

     

     

     

     

     

     

    • Shielded

    m (ft)

    50 (164)

    50 (164)

    200 (656)

    200 (656)

    200 (656)

    • Unshielded

    m (ft)

    100 (328)

    100 (328)

    300 (984)

    300 (984)

    300 (984)

    Degree of protection

     

    IP20

    IP20

    IP20

    IP20

    IP20

    Dimensions

     

     

     

     

     

     

    • Width

    mm (in)

    140 (5.51)

    140 (5.51)

    200 (7.87)

    200 (7.87)

    200 (7.87)

    • Height

    mm (in)

    355 (13.98)

    355 (13.98)

    472 (18.58)

    472 (18.58)

    472 (18.58)

    • Depth without operator panel

    mm (in)

    165 (6.50)

    165 (6.50)

    237 (9.33)

    237 (9.33)

    237 (9.33)

    Frame size

     

    FSC

    FSC

    FSD

    FSD

    FSD

    Weight, approx.

     

     

     

     

     

     

    • Without integrated line filter

    kg (lb)

    5 (11)

    5 (11)

    17 (37.5)

    17 (37.5)

    17 (37.5)

    • With integrated line filter

    kg (lb)

    5.2 (11.5)

    5.2 (11.5)

    –

    –

    –



    1) The rated output current Irated is based on the duty cycle for low overload (LO).

    2) The base-load current IH is based on the duty cycle for high overload (HO).

    3) Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

    4) Values dependent on ambient temperature and utilization.

    5) The input current depends on the motor load and line impedance. The input currents apply for a load with the type rating (based on Irated) for a line impedance corresponding to uk = 1%. The current values are specified on the rating plate of the Power Module.

     

    Line voltage 200 ... 240 V 3 AC

    PM240‑2 Power Modules standard variant

    Without integrated line filter

    6SL3210-1PC28-0UL0

    6SL3210-1PC31-1UL0

    6SL3210-1PC31-3UL0

    6SL3210-1PC31-6UL0

    6SL3210-1PC31-8UL0

    With integrated line filter class A

    –

    –

    –

    –

    –

    Output current

    at 50 Hz 230 V 3 AC

     

     

     

     

     

     

    • Rated current Irated 1)

    A

    80

    104

    130

    154

    178

    • For S6 duty (40 %) IS6

    A

    96

    124

    156

    184

    213

    • Base-load current IH2)

    A

    68

    80

    104

    130

    154

    • Maximum current Imax

    A

    136

    160

    208

    260

    308

    Type rating

     

     

     

     

     

     

    • Based on Irated

    kW (hp)

    22 (30)

    30 (40)

    37 (50)

    45 (60)

    55 (75)

    • Based on IH

    kW (hp)

    18.5 (25)

    22 (30)

    30 (40)

    37 (50)

    45 (60)

    Rated pulse frequency

    kHz

    4

    4

    4

    4

    4

    Efficiency η

    %

    >97

    >97

    >97

    >97

    >97

    Power loss 3)

    at rated current

    kW

    0.85

    1.2

    1.44 (3.53)

    1.79

    2.18 (3.53)

    Cooling air requirement

    m3/s (ft3/s)

    0.083 (2.9)

    0.083 (2.9)

    0.153 (5.4)

    0.153 (5.4)

    0.153 (5.4)

    Sound pressure level

    LpA (1 m)

    dB

    44 ... 62 4)

    44 ... 62 4)

    56 ... 68 4)

    56 ... 68 4)

    56 ... 68 4)

    24 V DC power supply

    for Control Unit

    A

    1

    1

    1

    1

    1

    Input current 5)

     

     

     

     

     

     

    • Rated current

    A

    83

    107

    134

    158

    183

    • Based on IH

    A

    71

    83

    110

    138

    164

    Line supply connection

    U1/L1, V1/L2, W1/L3

     

    Screw terminals

    Screw terminals

    M10 screw stud

    M10 screw stud

    M10 screw stud

    • Conductor cross-section

    mm2

    25 ... 70

    25 ... 70

    35 ... 2 × 120

    35 ... 2 × 120

    35 ... 2 × 120

    Motor connection

    U2, V2, W2

     

    Screw terminals

    Screw terminals

    M10 screw stud

    M10 screw stud

    M10 screw stud

    • Conductor cross-section

    mm2

    25 ... 70

    25 ... 70

    35 ... 2 × 120

    35 ... 2 × 120

    35 ... 2 × 120

    PE connection

     

    Screw terminals

    Screw terminals

    M10 screw stud

    M10 screw stud

    M10 screw stud

    Motor cable length, max.

     

     

     

     

     

     

    • Shielded

    m (ft)

    200 (656)

    200 (656)

    300 (984)

    300 (984)

    300 (984)

    • Unshielded

    m (ft)

    300 (984)

    300 (984)

    450 (1476)

    450 (1476)

    450 (1476)

    Degree of protection

     

    IP20

    IP20

    IP20

    IP20

    IP20

    Dimensions

     

     

     

     

     

     

    • Width

    mm (in)

    275 (10.83)

    275 (10.83)

    305 (12.01)

    305 (12.01)

    305 (12.01)

    • Height

    mm (in)

    551 (21.69)

    551 (21.69)

    708 (27.87)

    708 (27.87)

    708 (27.87)

    • Depth without operator panel

    mm (in)

    237 (9.33)

    237 (9.33)

    357 (14.06)

    357 (14.06)

    357 (14.06)

    Frame size

     

    FSE

    FSE

    FSF

    FSF

    FSF

    Weight, approx.

     

     

     

     

     

     

    • Without integrated line filter

    kg (lb)

    26 (57.3)

    26 (57.3)

    57 (126)

    57 (126)

    57 (126)

    • With integrated line filter

    kg (lb)

    –

    –

    –

    –

    –



    1) The rated output current Irated is based on the duty cycle for low overload (LO).

    2) The base-load current IH is based on the duty cycle for high overload (HO).

    3) Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

    4) Values dependent on ambient temperature and utilization.

    5) The input current depends on the motor load and line impedance. The input currents apply for a load with the type rating (based on Irated) for a line impedance corresponding to uk = 1%. The current values are specified on the rating plate of the Power Module.

     

    Line voltage 380 ... 480 V 3 AC

    PM240‑2 Power Modules standard variant

    Without integrated line filter

    6SL3210-1PE11-8UL1

    6SL3210-1PE12-3UL1

    6SL3210-1PE13-2UL1

    6SL3210-1PE14-3UL1

    6SL3210-1PE16-1UL1

    6SL3210-1PE18-0UL1

    With integrated line filter class A

    6SL3210-1PE11-8AL1

    6SL3210-1PE12-3AL1

    6SL3210-1PE13-2AL1

    6SL3210-1PE14-3AL1

    6SL3210-1PE16-1AL1

    6SL3210-1PE18-0AL1

    Output current

    at 50 Hz 400 V 3 AC

     

     

     

     

     

     

     

    • Rated current Irated1)

    A

    1.7

    2.2

    3.1

    4.1

    5.9

    7.7

    • For S6 duty (40 %) IS6

    A

    2

    2.5

    3.5

    4.5

    6.5

    8.5

    • Base-load current IH2)

    A

    1.3

    1.7

    2.2

    3.1

    4.1

    5.9

    • Maximum current Imax

    A

    2.6

    3.4

    4.7

    6.2

    8.9

    11.8

    Type rating

     

     

     

     

     

     

     

    • Based on Irated

    kW (hp)

    0.55 (0.75)

    0.75 (1)

    1.1 (1.5)

    1.5 (2)

    2.2 (3)

    3 (4)

    • Based on IH

    kW (hp)

    0.37 (0.5)

    0.55 (0.75)

    0.75 (1)

    1.1 (1.5)

    1.5 (2)

    2.2 (3)

    Rated pulse frequency

    kHz

    4

    4

    4

    4

    4

    4

    Efficiency η

    %

    >96

    >96

    >96

    >96

    >96

    >96

    Power loss 3)

    at rated current

    kW

    0.04

    0.04

    0.04

    0.07

    0.1

    0.12

    Cooling air requirement

    m3/s (ft3/s)

    0.005 (0.18)

    0.005 (0.18)

    0.005 (0.18)

    0.005 (0.18)

    0.005 (0.18)

    0.005 (0.18)

    Sound pressure level

    LpA (1 m)

    dB

    <50

    <50

    <50

    <50

    < 56.3

    < 56.3

    24 V DC power supply

    for Control Unit

    A

    1

    1

    1

    1

    1

    1

    Input current 4)

     

     

     

     

     

     

     

    • Rated current

    A

    2.3

    2.9

    4.1

    5.5

    7.7

    10.1

    • Based on IH

    A

    2

    2.6

    3.3

    4.7

    6.1

    8.8

    Line supply connection

    U1/L1, V1/L2, W1/L3

     

    Terminal connector

    Terminal connector

    Terminal connector

    Terminal connector

    Terminal connector

    Terminal connector

    • Conductor cross-section

    mm2

    1 ... 2.5

    1 ... 2.5

    1 ... 2.5

    1 ... 2.5

    1 ... 2.5

    1 ... 2.5

    Motor connection

    U2, V2, W2

     

    Terminal connector

    Terminal connector

    Terminal connector

    Terminal connector

    Terminal connector

    Terminal connector

    • Conductor cross-section

    mm2

    1 ... 2.5

    1 ... 2.5

    1 ... 2.5

    1 ... 2.5

    1 ... 2.5

    1 ... 2.5

    PE connection

     

    Included in terminal connector

    Included in terminal connector

    Included in terminal connector

    Included in terminal connector

    Included in terminal connector

    Included in terminal connector

    Motor cable length, max.

     

     

     

     

     

     

     

    • Without filter, shielded/unshielded

    m (ft)

    150/150 (492/492)

    150/150 (492/492)

    150/150 (492/492)

    150/150 (492/492)

    150/150 (492/492)

    150/150 (492/492)

    • With integrated filter class A, shielded/unshielded

    m (ft)

    50/100 (164/328)

    50/100 (164/328)

    50/100 (164/328)

    50/100 (164/328)

    50/100 (164/328)

    50/100 (164/328)

    Degree of protection

     

    IP20

    IP20

    IP20

    IP20

    IP20

    IP20

    Dimensions

     

     

     

     

     

     

     

    • Width

    mm (in)

    73 (2.87)

    73 (2.87)

    73 (2.87)

    73 (2.87)

    73 (2.87)

    73 (2.87)

    • Height

    mm (in)

    196 (7.72)

    196 (7.72)

    196 (7.72)

    196 (7.72)

    196 (7.72)

    196 (7.72)

    • Depth without operator panel

    mm (in)

    165 (6.50)

    165 (6.50)

    165 (6.50)

    165 (6.50)

    165 (6.50)

    165 (6.50)

    Frame size

     

    FSA

    FSA

    FSA

    FSA

    FSA

    FSA

    Weight, approx.

     

     

     

     

     

     

     

    • Without integrated line filter

    kg (lb)

    1.4 (3.09)

    1.4 (3.09)

    1.4 (3.09)

    1.4 (3.09)

    1.4 (3.09)

    1.4 (3.09)

    • With integrated line filter

    kg (lb)

    1.5 (3.31)

    1.5 (3.31)

    1.5 (3.31)

    1.5 (3.31)

    1.5 (3.31)

    1.5 (3.31)



    1) The rated output current Irated is based on the duty cycle for low overload (LO).

    2) The base-load current IH is based on the duty cycle for high overload (HO).

    3) Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

    4) The input current depends on the motor load and line impedance. The input currents apply for a load with the type rating (based on Irated) for a line impedance corresponding to uk = 1%. The current values are specified on the rating plate of the Power Module.

     

    Line voltage 380 ... 480 V 3 AC

    PM240‑2 Power Modules standard variant

    Without integrated line filter

    6SL3210-1PE21-1UL0

    6SL3210-1PE21-4UL0

    6SL3210-1PE21-8UL0

    6SL3210-1PE22-7UL0

    6SL3210-1PE23-3UL0

    With integrated line filter class A

    6SL3210-1PE21-1AL0

    6SL3210-1PE21-4AL0

    6SL3210-1PE21-8AL0

    6SL3210-1PE22-7AL0

    6SL3210-1PE23-3AL0

    Output current

    at 50 Hz 400 V 3 AC

     

     

     

     

     

     

    • Rated current Irated1)

    A

    10.2

    13.2

    18

    26

    32

    • For S6 duty (40 %) IS6

    A

    11.2

    14.5

    19.8

    28.6

    37.1

    • Base-load current IH2)

    A

    7.7

    10.2

    13.2

    18

    26

    • Maximum current Imax

    A

    15.4

    20.4

    27

    39

    52

    Type rating

     

     

     

     

     

     

    • Based on Irated

    kW (hp)

    4 (5)

    5.5 (7.5)

    7.5 (10)

    11 (15)

    15 (20)

    • Based on IH

    kW (hp)

    3 (4)

    4 (5)

    5.5 (7.5)

    7.5 (10)

    11 (15)

    Rated pulse frequency

    kHz

    4

    4

    4

    4

    4

    Efficiency η

    %

    >97

    >97

    >97

    >97

    >97

    Power loss 3)

    at rated current

    kW

    0.11

    0.15

    0.2

    0.3

    0.37

    Cooling air requirement

    m3/s (ft3/s)

    0.0092 (0.32)

    0.0092 (0.32)

    0.0092 (0.32)

    0.0185 (0.65)

    0.0185 (0.65)

    Sound pressure level

    LpA (1 m)

    dB

    <62

    <62

    <62

    <65

    <65

    24 V DC power supply

    for Control Unit

    A

    1

    1

    1

    1

    1

    Input current 4)

     

     

     

     

     

     

    • Rated current

    A

    13.3

    17.2

    22.2

    32.6

    39.9

    • Based on IH

    A

    11.6

    15.3

    19.8

    27

    36

    Line supply connection

    U1/L1, V1/L2, W1/L3

     

    Terminal connector

    Terminal connector

    Terminal connector

    Terminal connector

    Terminal connector

    • Conductor cross-section

    mm2

    1.5 ... 6

    1.5 ... 6

    1.5 ... 6

    6 ... 16

    6 ... 16

    Motor connection

    U2, V2, W2

     

    Terminal connector

    Terminal connector

    Terminal connector

    Terminal connector

    Terminal connector

    • Conductor cross-section

    mm2

    1.5 ... 6

    1.5 ... 6

    1.5 ... 6

    6 ... 16

    6 ... 16

    PE connection

     

    Included in terminal connector

    Included in terminal connector

    Included in terminal connector

    Included in terminal connector

    Included in terminal connector

    Motor cable length, max.

     

     

     

     

     

     

    • Without filter, shielded/unshielded

    m (ft)

    150/150 (492/492)

    150/150 (492/492)

    150/150 (492/492)

    150/150 (492/492)

    150/150 (492/492)

    • With integrated filter class A, shielded/unshielded

    m (ft)

    100/100 (328/328) 5)

    100/100 (328/328) 5)

    100/100 (328/328) 5)

    150/150 (492/492) 5)

    150/150 (492/492) 5)

    Degree of protection

     

    IP20

    IP20

    IP20

    IP20

    IP20

    Dimensions

     

     

     

     

     

     

    • Width

    mm (in)

    100 (3.94)

    100 (3.94)

    100 (3.94)

    140 (5.51)

    140 (5.51)

    • Height

    mm (in)

    291 (11.46)

    291 (11.46)

    291 (11.46)

    355 (13.98)

    355 (13.98)

    • Depth without operator panel

    mm (in)

    165 (6.50)

    165 (6.50)

    165 (6.50)

    165 (6.50)

    165 (6.50)

    Frame size

     

    FSB

    FSB

    FSB

    FSC

    FSC

    Weight, approx.

     

     

     

     

     

     

    • Without integrated line filter

    kg (lb)

    2.9 (6.39)

    2.9 (6.39)

    3 (6.62)

    4.7 (10.4)

    4.8 (10.6)

    • With integrated line filter

    kg (lb)

    3.1 (6.84)

    3.1 (6.84)

    3.2 (7.06)

    5.3 (11.7)

    5.4 (11.9)



    1) The rated output current Irated is based on the duty cycle for low overload (LO).

    2) The base-load current IH is based on the duty cycle for high overload (HO).

    3) Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

    4) The input current depends on the motor load and line impedance. The input currents apply for a load with the type rating (based on Irated) for a line impedance corresponding to uk = 1%. The current values are specified on the rating plate of the Power Module.

    5) The values are applicable for low capacitance cables, e.g. MOTION‑CONNECT. For standard CY cables the max. permissible motor cable length is 50 m (164 ft) (shielded).

     

    Line voltage 380 ... 480 V 3 AC

    PM240‑2 Power Modules standard variant

    Without integrated line filter

    6SL3210-1PE23-8UL0

    6SL3210-1PE24-5UL0

    6SL3210-1PE26-0UL0

    6SL3210-1PE27-5UL0

    6SL3210-1PE28-8UL0

    6SL3210-1PE31-1UL0

    With integrated line filter class A

    6SL3210-1PE23-8AL0

    6SL3210-1PE24-5AL0

    6SL3210-1PE26-0AL0

    6SL3210-1PE27-5AL0

    6SL3210-1PE28-8AL0

    6SL3210-1PE31-1AL0

    Output current

    at 50 Hz 400 V 3 AC

     

     

     

     

     

     

     

    • Rated current Irated1)

    A

    38

    45

    60

    75

    90

    110

    • For S6 duty (40 %) IS6

    A

    45

    54

    72

    90

    108

    132

    • Base-load current IH2)

    A

    32

    38

    45

    60

    75

    90

    • Maximum current Imax

    A

    64

    76

    90

    120

    150

    180

    Type rating

     

     

     

     

     

     

     

    • Based on Irated

    kW (hp)

    18.5 (25)

    22 (30)

    30 (40)

    37 (50)

    45 (60)

    55 (75)

    • Based on IH

    kW (hp)

    15 (20)

    18.5 (25)

    22 (30)

    30 (40)

    37 (50)

    45 (60)

    Rated pulse frequency

    kHz

    4

    4

    4

    4

    4

    4

    Efficiency η

    %

    >97

    >97

    >97

    >97

    >97

    >97

    Power loss 3)

    at rated current

    kW

    0.55 (0.74)

    0.68

    0.77

    1.02

    1.2

    1.55

    Cooling air requirement

    m3/s (ft3/s)

    0.055 (1.9)

    0.055 (1.9)

    0.055 (1.9)

    0.055 (1.9)

    0.083 (2.9)

    0.083 (2.9)

    Sound pressure level

    LpA (1 m)

    dB

    45 ... 65 4)

    45 ... 65 4)

    45 ... 65 4)

    45 ... 65 4)

    44 ... 62 4)

    44 ... 62 4)

    24 V DC power supply

    for Control Unit

    A

    1

    1

    1

    1

    1

    1

    Input current 5)

     

     

     

     

     

     

     

    • Rated current

    A

    39

    47

    62 (

    77

    93

    113

    • Based on IH

    A

    33

    38

    47

    62

    78

    94

    Line supply connection

    U1/L1, V1/L2, W1/L3

     

    Screw terminals

    Screw terminals

    Screw terminals

    Screw terminals

    Screw terminals

    Screw terminals

    • Conductor cross-section

    mm2

    10 ... 35

    10 ... 35

    10 ... 35

    10 ... 35

    25 ... 70

    25 ... 70

    Motor connection

    U2, V2, W2

     

    Screw terminals

    Screw terminals

    Screw terminals

    Screw terminals

    Screw terminals

    Screw terminals

    • Conductor cross-section

    mm2

    10 ... 35

    10 ... 35

    10 ... 35

    10 ... 35

    25 ... 70

    25 ... 70

    PE connection

     

    Screw terminals

    Screw terminals

    Screw terminals

    Screw terminals

    Screw terminals

    Screw terminals

    Motor cable length, max.

     

     

     

     

     

     

     

    • Shielded

    m (ft)

    200 (656)

    200 (656)

    200 (656)

    200 (656)

    200 (656)

    200 (656)

    • Unshielded

    m (ft)

    300 (984)

    300 (984)

    300 (984)

    300 (984)

    300 (984)

    300 (984)

    Degree of protection

     

    IP20

    IP20

    IP20

    IP20

    IP20

    IP20

    Dimensions

     

     

     

     

     

     

     

    • Width

    mm (in)

    200 (7.87)

    200 (7.87)

    200 (7.87)

    200 (7.87)

    275 (10.83)

    275 (10.83)

    • Height

    mm (in)

    472 (18.58)

    472 (18.58)

    472 (18.58)

    472 (18.58)

    551 (21.69)

    551 (21.69)

    • Depth without operator panel

    mm (in)

    237 (9.33)

    237 (9.33)

    237 (9.33)

    237 (9.33)

    237 (9.33)

    237 (9.33)

    Frame size

     

    FSD

    FSD

    FSD

    FSD

    FSE

    FSE

    Weight, approx.

     

     

     

     

     

     

     

    • Without integrated line filter

    kg (lb)

    16 (35.3)

    16 (35.3)

    17 (37.5)

    17 (37.5)

    26 (57.3)

    26 (57.3)

    • With integrated line filter

    kg (lb)

    17.5 (38.6)

    17.5 (38.6)

    18.5 (40.8)

    18.5 (40.8)

    28 (61.7)

    28 (61.7)



    1) The rated output current Irated is based on the duty cycle for low overload (LO).

    2) The base-load current IH is based on the duty cycle for high overload (HO).

    3) Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

    4) Values dependent on ambient temperature and utilization.

    5) The input current depends on the motor load and line impedance. The input currents apply for a load with the type rating (based on Irated) for a line impedance corresponding to uk = 1%. The current values are specified on the rating plate of the Power Module.

     

    Line voltage 380 ... 480 V 3 AC

    PM240‑2 Power Modules standard variant

    Without integrated line filter

    6SL3210-1PE31-5UL0

    6SL3210-1PE31-8UL0

    6SL3210-1PE32-1UL0

    6SL3210-1PE32-5UL0

    With integrated line filter class A

    6SL3210-1PE31-5AL0

    6SL3210-1PE31-8AL0

    6SL3210-1PE32-1AL0

    6SL3210-1PE32-5AL0

    Output current

    at 50 Hz 400 V 3 AC

     

     

     

     

     

    • Rated current Irated1)

    A

    145

    178

    205

    250

    • For S6 duty (40 %) IS6

    A

    174

    213

    246

    300

    • Base-load current IH2)

    A

    110

    145

    178

    205

    • Maximum current Imax

    A

    220

    290

    356

    410

    Type rating

     

     

     

     

     

    • Based on Irated

    kW (hp)

    75 (100)

    90 (125)

    110 (150)

    132 (200)

    • Based on IH

    kW (hp)

    55 (75)

    75 (100)

    90 (125)

    110 (150)

    Rated pulse frequency

    kHz

    4

    4

    2

    2

    Efficiency η

    %

    >97

    >97

    >97

    >97

    Power loss 3)

    at rated current

    kW

    1.79

    2.33

    2.17

    2.84

    Cooling air requirement

    m3/s (ft3/s)

    0.2 (7.1)

    0.2 (7.1)

    0.2 (7.1)

    0.2 (7.1)

    Sound pressure level

    LpA (1 m)

    dB

    56 ... 68 4)

    56 ... 68 4)

    56 ... 68 4)

    56 ... 68 4)

    24 V DC power supply

    for Control Unit

    A

    1

    1

    1

    1

    Input current 5)

     

     

     

     

     

    • Rated current

    A

    149

    183

    211

    257

    • Based on IH

    A

    117

    154

    189

    218

    Line supply connection

    U1/L1, V1/L2, W1/L3

     

    M10 screw stud

    M10 screw stud

    M10 screw stud

    M10 screw stud

    • Conductor cross-section

    mm2

    35 ... 2 × 120

    35 ... 2 × 120

    35 ... 2 × 120

    35 ... 2 × 120

    Motor connection

    U2, V2, W2

     

    M10 screw stud

    M10 screw stud

    M10 screw stud

    M10 screw stud

    • Conductor cross-section

    mm2

    35 ... 2 × 120

    35 ... 2 × 120

    35 ... 2 × 120

    35 ... 2 × 120

    PE connection

     

    M10 screw stud

    M10 screw stud

    M10 screw stud

    M10 screw stud

    Motor cable length, max.

     

     

     

     

     

    • Shielded

    m (ft)

    300 (984)

    300 (984)

    300 (984)

    300 (984)

    • Unshielded

    m (ft)

    450 (1476)

    450 (1476)

    450 (1476)

    450 (1476)

    Degree of protection

     

    IP20

    IP20

    IP20

    IP20

    Dimensions

     

     

     

     

     

    • Width

    mm (in)

    305 (12.01)

    305 (12.01)

    305 (12.01)

    305 (12.01)

    • Height

    mm (in)

    708 (27.87)

    708 (27.87)

    708 (27.87)

    708 (27.87)

    • Depth without operator panel

    mm (in)

    357 (14.06)

    357 (14.06)

    357 (14.06)

    357 (14.06)

    Frame size

     

    FSF

    FSF

    FSF

    FSF

    Weight, approx.

     

     

     

     

     

    • Without integrated line filter

    kg (lb)

    57 (126)

    57 (126)

    61 (135)

    61 (135)

    • With integrated line filter

    kg (lb)

    63 (139)

    63 (139)

    65 (143)

    65 (143)



    1) The rated output current Irated is based on the duty cycle for low overload (LO).

    2) The base-load current IH is based on the duty cycle for high overload (HO).

    3) Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

    4) Values dependent on ambient temperature and utilization.

    5) The input current depends on the motor load and line impedance. The input currents apply for a load with the type rating (based on Irated) for a line impedance corresponding to uk = 1%. The current values are specified on the rating plate of the Power Module.

     

    Line voltage 500 ... 690 V 3 AC

    PM240‑2 Power Modules standard variant

    Without integrated line filter

    6SL3210-1PH21-4UL0

    6SL3210-1PH22-0UL0

    6SL3210-1PH22-3UL0

    6SL3210-1PH22-7UL0

    6SL3210-1PH23-5UL0

    6SL3210-1PH24-2UL0

    With integrated line filter class A

    6SL3210-1PH21-4AL0

    6SL3210-1PH22-0AL0

    6SL3210-1PH22-3AL0

    6SL3210-1PH22-7AL0

    6SL3210-1PH23-5AL0

    6SL3210-1PH24-2AL0

    Output current

    at 50 Hz 690 V 3 AC

     

     

     

     

     

     

     

    • Rated current Irated 1)

    A

    14

    19

    23

    27

    35

    42

    • For S6 duty (40 %) IS6

    A

    16

    22

    27

    32

    42

    50

    • Base-load current IH2)

    A

    11

    14

    19

    23

    27

    35

    • Maximum current Imax

    A

    22

    29

    38

    46

    54

    70

    Type rating

     

     

     

     

     

     

     

    • Based on Irated

    kW (hp)

    11 (10)

    15 (15)

    18.5 (20)

    22 (25)

    30 (30)

    37 (40)

    • Based on IH

    kW (hp)

    7.5 (7.5)

    11 (10)

    15 (15)

    18.5 (20)

    22 (25)

    30 (30)

    Rated pulse frequency

    kHz

    2

    2

    2

    2

    2

    2

    Efficiency η

    %

    >98

    >98

    >98

    >98

    >98

    >98

    Power loss 3)

    at rated current

    kW

    0.32

    0.41

    0.48

    0.56

    0.73

    0.88

    Cooling air requirement

    m3/s (ft3/s)

    0.055 (1.9)

    0.055 (1.9)

    0.055 (1.9)

    0.055 (1.9)

    0.055 (1.9)

    0.055 (1.9)

    Sound pressure level

    LpA (1 m)

    dB

    45 ... 65 4)

    45 ... 65 4)

    45 ... 65 4)

    45 ... 65 4)

    45 ... 65 4)

    45 ... 65 4)

    24 V DC power supply

    for Control Unit

    A

    1

    1

    1

    1

    1

    1

    Input current 5)

     

     

     

     

     

     

     

    • Rated current

    A

    15

    20

    24

    28

    36

    44

    • Based on IH

    A

    11

    14

    20

    24

    28

    36

    Line supply connection

    U1/L1, V1/L2, W1/L3

     

    Screw terminals

    Screw terminals

    Screw terminals

    Screw terminals

    Screw terminals

    Screw terminals

    • Conductor cross-section

    mm2

    10 ... 35

    10 ... 35

    10 ... 35

    10 ... 35

    10 ... 35

    10 ... 35

    Motor connection

    U2, V2, W2

     

    Screw terminals

    Screw terminals

    Screw terminals

    Screw terminals

    Screw terminals

    Screw terminals

    • Conductor cross-section

    mm2

    10 ... 35

    10 ... 35

    10 ... 35

    10 ... 35

    10 ... 35

    10 ... 35

    PE connection

     

    Screw terminals

    Screw terminals

    Screw terminals

    Screw terminals

    Screw terminals

    Screw terminals

    Motor cable length, max.

     

     

     

     

     

     

     

    • Shielded

    m (ft)

    200 (656)

    200 (656)

    200 (656)

    200 (656)

    200 (656)

    200 (656)

    • Unshielded

    m (ft)

    300 (984)

    300 (984)

    300 (984)

    300 (984)

    300 (984)

    300 (984)

    Degree of protection

     

    IP20

    IP20

    IP20

    IP20

    IP20

    IP20

    Dimensions

     

     

     

     

     

     

     

    • Width

    mm (in)

    200 (7.87)

    200 (7.87)

    200 (7.87)

    200 (7.87)

    200 (7.87)

    200 (7.87)

    • Height

    mm (in)

    472 (18.58)

    472 (18.58)

    472 (18.58)

    472 (18.58)

    472 (18.58)

    472 (18.58)

    • Depth without operator panel

    mm (in)

    237 (9.33)

    237 (9.33)

    237 (9.33)

    237 (9.33)

    237 (9.33)

    237 (9.33)

    Frame size

     

    FSD

    FSD

    FSD

    FSD

    FSD

    FSD

    Weight, approx.

     

     

     

     

     

     

     

    • Without integrated line filter

    kg (lb)

    17 (37.5)

    17 (37.5)

    17 (37.5)

    17 (37.5)

    17 (37.5)

    17 (37.5)

    • With integrated line filter

    kg (lb)

    18.5 (40.8)

    18.5 (40.8)

    18.5 (40.8)

    18.5 (40.8)

    18.5 (40.8)

    18.5 (40.8)



    1) The rated output current Irated is based on the duty cycle for low overload (LO).

    2) The base-load current IH is based on the duty cycle for high overload (HO).

    3) Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

    4) Values dependent on ambient temperature and utilization.

    5) The input current depends on the motor load and line impedance. The input currents apply for a load with the type rating (based on Irated) for a line impedance corresponding to uk = 1%. The current values are specified on the rating plate of the Power Module.

     

    Line voltage 500 ... 690 V 3 AC

    PM240‑2 Power Modules standard variant

    Without integrated line filter

    6SL3210-1PH25-2UL0

    6SL3210-1PH26-2UL0

    6SL3210-1PH28-0UL0

    6SL3210-1PH31-0UL0

    6SL3210-1PH31-2UL0

    6SL3210-1PH31-4UL0

    With integrated line filter class A

    6SL3210-1PH25-2AL0

    6SL3210-1PH26-2AL0

    6SL3210-1PH28-0AL0

    6SL3210-1PH31-0AL0

    6SL3210-1PH31-2AL0

    6SL3210-1PH31-4AL0

    Output current

    at 50 Hz 690 V 3 AC

     

     

     

     

     

     

     

    • Rated current Irated 1)

    A

    52

    62

    80

    100

    115

    142

    • For S6 duty (40 %) IS6

    A

    62

    74

    96

    120

    138

    170

    • Base-load current IH2)

    A

    42

    52

    62

    80

    100

    115

    • Maximum current Imax

    A

    84

    104

    124

    160

    200

    230

    Type rating

     

     

     

     

     

     

     

    • Based on Irated

    kW (hp)

    45 (50)

    55 (60)

    75 (75)

    90 (100)

    110 (100)

    132 (125)

    • Based on IH

    kW (hp)

    37 (40)

    45 (50)

    55 (60)

    75 (75)

    90 (100)

    110 (100)

    Rated pulse frequency

    kHz

    2

    2

    2

    2

    2

    2

    Efficiency η

    %

    >98

    >98

    >98

    >98

    >98

    >98

    Power loss 3)

    at rated current

    kW

    1

    1.21

    1.23

    1.57

    1.83

    2.35

    Cooling air requirement

    m3/s (ft3/s)

    0.083 (2.9)

    0.083 (2.9)

    0.083 (2.9)

    0.083 (2.9)

    0.2 (7.1)

    0.2 (7.1)

    Sound pressure level

    LpA (1 m)

    dB

    44 ... 62 4)

    44 ... 62 4)

    56 ... 68 4)

    56 ... 68 4)

    56 ... 68 4)

    56 ... 68 4)

    24 V DC power supply

    for Control Unit

    A

    1

    1

    1

    1

    1

    1

    Input current 5)

     

     

     

     

     

     

     

    • Rated current

    A

    50

    59

    78

    97

    111

    137

    • Based on IH

    A

    44

    54

    66

    85

    106

    122

    Line supply connection

    U1/L1, V1/L2, W1/L3

     

    Screw terminals

    Screw terminals

    M10 screw stud

    M10 screw stud

    M10 screw stud

    M10 screw stud

    • Conductor cross-section

    mm2

    25 ... 70

    25 ... 70

    35 ... 2 × 120

    35 ... 2 × 120

    35 ... 2 × 120

    35 ... 2 × 120

    Motor connection

    U2, V2, W2

     

    Screw terminals

    Screw terminals

    M10 screw stud

    M10 screw stud

    M10 screw stud

    M10 screw stud

    • Conductor cross-section

    mm2

    25 ... 70

    25 ... 70

    35 ... 2 × 120

    35 ... 2 × 120

    35 ... 2 × 120

    35 ... 2 × 120

    PE connection

     

    Screw terminals

    Screw terminals

    M10 screw stud

    M10 screw stud

    M10 screw stud

    M10 screw stud

    Motor cable length, max.

     

     

     

     

     

     

     

    • Shielded

    m (ft)

    200 (656)

    200 (656)

    300 (984)

    300 (984)

    300 (984)

    300 (984)

    • Unshielded

    m (ft)

    300 (984)

    300 (984)

    450 (1476)

    450 (1476)

    450 (1476)

    450 (1476)

    Degree of protection

     

    IP20

    IP20

    IP20

    IP20

    IP20

    IP20

    Dimensions

     

     

     

     

     

     

     

    • Width

    mm (in)

    275 (10.83)

    275 (10.83)

    305 (12.01)

    305 (12.01)

    305 (12.01)

    305 (12.01)

    • Height

    mm (in)

    551 (21.69)

    551 (21.69)

    708 (27.87)

    708 (27.87)

    708 (27.87)

    708 (27.87)

    • Depth without operator panel

    mm (in)

    237 (9.33)

    237 (9.33)

    357 (14.06)

    357 (14.06)

    357 (14.06)

    357 (14.06)

    Frame size

     

    FSE

    FSE

    FSF

    FSF

    FSF

    FSF

    Weight, approx.

     

     

     

     

     

     

     

    • Without integrated line filter

    kg (lb)

    26 (57.3)

    26 (57.3)

    60 (132.3)

    60 (132.3)

    60 (132.3)

    60 (132.3)

    • With integrated line filter

    kg (lb)

    28 (61.7)

    28 (61.7)

    64 (141)

    64 (141)

    64 (141)

    64 (141)



    1) The rated output current Irated is based on the duty cycle for low overload (LO).

    2) The base-load current IH is based on the duty cycle for high overload (HO).

    3) Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

    4) Values dependent on ambient temperature and utilization.

    5) The input current depends on the motor load and line impedance. The input currents apply for a load with the type rating (based on Irated) for a line impedance corresponding to uk = 1%. The current values are specified on the rating plate of the Power Module.

     

    PM240‑2 Power Modules push-through variant

    Line voltage 200 ... 240 V 1 AC/3 AC

    PM240‑2 Power Modules push-through variant

    Without integrated line filter

    6SL3211-1PB13-8UL0

    6SL3211-1PB21-0UL0

    6SL3211-1PB21-8UL0

    With integrated line filter class A

    6SL3211-1PB13-8AL0

    6SL3211-1PB21-0AL0

    6SL3211-1PB21-8AL0

    Output current

    At 50 Hz 230 V 1 AC/3 AC

     

     

     

     

    • Rated current Irated 1)

    A

    3.9

    10.4

    17.5

    • For S6 duty (40 %) IS6

    A

    3.3

    11.5

    19.3

    • Base-load current IH2)

    A

    3

    7.4

    13.6

    • Maximum current Imax

    A

    6 (0.24)

    15.6

    27.2

    Type rating

     

     

     

     

    • Based on Irated

    kW (hp)

    0.75 (1)

    2.2 (3)

    4 (5)

    • Based on IH

    kW (hp)

    0.55 (0.75)

    1.5 (2)

    3 (4)

    Rated pulse frequency

    kHz

    4

    4

    4

    Efficiency η

    %

    >96

    >96

    >96

    Power loss 3)

    at rated current

    kW

    0.04

    0.12

    0.18

    Cooling air requirement

    m3/s (ft3/s)

    0.005 (0.18)

    0.0092 (0.3)

    0.0185 (0.7)

    Sound pressure level

    LpA (1 m)

    dB

    <56

    <62

    <65

    24 V DC power supply

    for Control Unit

    A

    1

    1

    1

    Input current 4)

     

     

     

     

    • Rated current 1 AC/3 AC

    A

    9.6/5.5

    24/13.9

    43/24.8

    • Based on IH 1 AC/3 AC

    A

    8.4/4.8

    20.9/12.1

    37.5/21.7

    Line supply connection

    U1/L1, V1/L2, W1/L3

     

    Screw terminals, plug-in

    Screw terminals, plug-in

    Screw terminals, plug-in

    • Conductor cross-section

    mm2

    1.5 ... 2.5

    1.5 ... 6

    6 ... 16

    Motor connection

    U2, V2, W2

     

    Screw terminals, plug-in

    Screw terminals, plug-in

    Screw terminals, plug-in

    • Conductor cross-section

    mm2

    1.5 ... 2.5

    1.5 ... 6

    6 ... 16

    Motor cable length, max.

     

     

     

     

    • Shielded

    m (ft)

    150 (492)

    150 (492)

    150 (492)

    • Unshielded

    m (ft)

    150 (492)

    150 (492)

    150 (492)

    Degree of protection

     

    IP20

    IP20

    IP20

    Dimensions

     

     

     

     

    • Width

    mm (in)

    126 (4.96)

    154 (6.06)

    200 (7.87)

    • Height

    mm (in)

    238 (9.37)

    345 (13.58)

    411 (16.18)

    • Depth without operator panel

    mm (in)

    171 (6.73)

    171 (6.73)

    171 (6.73)

    Frame size

     

    FSA

    FSB

    FSC

    Weight, approx.

    With integrated line filter

     

     

     

     

    • Without integrated line filter

    kg (lb)

    1.8 (3.97)

    3.4 (7.50)

    5.8 (12.8)

    • With integrated line filter

    kg (lb)

    2 (4.41)

    3.7 (8.16)

    6.3 (13.9)



    1) The rated output current Irated is based on the duty cycle for low overload (LO).

    2) The base-load current IH is based on the duty cycle for high overload (HO).

    3) Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

    4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load with the type rating (based on Irated) – these current values are specified on the rating plate.

     

    Line voltage 380 ... 480 V 3 AC

    PM240‑2 Power Modules push-through variant

    Without integrated line filter

    6SL3211-1PE18-0UL1

    6SL3211-1PE21-8UL0

    6SL3211-1PE23-3UL0

    With integrated line filter class A

    6SL3211-1PE18-0AL1

    6SL3211-1PE21-8AL0

    6SL3211-1PE23-3AL0

    Output current

    at 50 Hz 400 V 3 AC

     

     

     

     

    • Rated current Irated1)

    A

    7.7

    18

    32

    • For S6 duty (40 %) IS6

    A

    8.5

    19.8

    37.1

    • Base-load current IH2)

    A

    5.9

    13.2

    26

    • Maximum current Imax

    A

    11.8

    27

    52

    Type rating

     

     

     

     

    • Based on Irated

    kW (hp)

    3 (4)

    7.5 (10)

    15 (20)

    • Based on IH

    kW (hp)

    2.2 (7.5)

    5.5 (7.5)

    11 (15)

    Rated pulse frequency

    kHz

    4

    4

    4

    Efficiency η

    %

    >96

    >97

    >97

    Power loss 3)

    at rated current

    kW

    0.113

    0.239

    0.385

    Cooling air requirement

    m3/s (ft3/s)

    0.007 (0.2)

    0.0092 (0.3)

    0.0185 (0.7)

    Sound pressure level

    LpA (1 m)

    dB

    <56

    <62

    <65

    24 V DC power supply

    for Control Unit

    A

    1

    1

    1

    Input current 4)

     

     

     

     

    • Rated current

    A

    10.1

    22.2

    39.9

    • Based on IH

    A

    8.8

    19.8

    36

    Line supply connection

    U1/L1, V1/L2, W1/L3

     

    Screw terminals, plug-in

    Screw terminals, plug-in

    Screw terminals, plug-in

    • Conductor cross-section

    mm2

    1.5 ... 2.5

    1.5 ... 6

    6 ... 16

    Motor connection

    U2, V2, W2

     

    Screw terminals, plug-in

    Screw terminals, plug-in

    Screw terminals, plug-in

    • Conductor cross-section

    mm2

    1.5 ... 2.5

    1.5 ... 6

    6 ... 16

    Motor cable length, max.

     

     

     

     

    • Without filter, shielded/unshielded

    m (ft)

    150/150 (492/492)

    150/150 (492/492)

    150/150 (492/492)

    • With integrated filter class A, shielded/unshielded

    m (ft)

    50/100 (164/328)

    100/100 (328/328) 5)

    150/150 (492/492) 5)

    Degree of protection

     

    IP20

    IP20

    IP20

    Dimensions

     

     

     

     

    • Width

    mm (in)

    126 (4.96)

    154 (6.06)

    200 (7.87)

    • Height

    mm (in)

    238 (9.37)

    345 (13.58)

    411 (16.18)

    • Depth without operator panel

    mm (in)

    171 (6.73)

    171 (6.73)

    171 (6.73)

    Frame size

     

    FSA

    FSB

    FSC

    Weight, approx.

    With integrated line filter

     

     

     

     

    • Without integrated line filter

    kg (lb)

    1.7 (3.75)

    3.6 (7.94)

    5.8 (12.8)

    • With integrated line filter

    kg (lb)

    1.8 (3.97)

    3.9 (8.60)

    6.3 (13.9)



    1) The rated output current Irated is based on the duty cycle for low overload (LO).

    2) The base-load current IH is based on the duty cycle for high overload (HO).

    3) Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311

    4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load with the type rating (based on Irated) – these current values are specified on the rating plate.

    5) The values are applicable for low capacitance cables, e.g. MOTION‑CONNECT. For standard CY cables the max. permissible motor cable length is 50 m (164 ft) (shielded).