Modular system, expansion of outputs (CNX8600)

• Заказные данные
  (2)
• Аксессуары
  (1)
• Информационные материалы

  Информационные материалы

  The CNX8600 expansion modules are part of the SITOP PSU8600 modular system and expand the basic unit by increasing the number of selectively monitored outputs.

  You can connect up to four CNX8600 expansion modules to the PSU8600 basic device. The connection takes place on top of the modules without any wiring by means of the System Clip Link, a connecting plug for system data and power supply.

  Main product highlights

  • Four integrated outputs with up to 5 A or 10 A each and selective monitoring
  • Voltage and response threshold can be set separately and are infinitely adjustable for each output
  • Comprehensive diagnostic information during operation via the PSU8600 basic unit
  • Outputs can be activated and deactivated in a targeted manner with PROFIenergy via the PSU8600 basic unit
  • Easy connection without wiring overhead
  • Slim design

  Технические данные

  Order number		6EP4436-8XB00-0CY0	6EP4437-8XB00-0CY0
  Product		SITOP CNX8600	SITOP CNX8600
  Power supply, type		4x 5 A	4x 10 A
  Output
  Output		Controlled, isolated DC voltage	Controlled, isolated DC voltage
  Number of outputs		4	4
  Rated voltage Vout DC		24 V	24 V
  Output voltage
  ● at output 1 at DC Rated value		24 V	24 V
  ● at output 2 at DC Rated value		24 V	24 V
  ● at output 3 at DC Rated value		24 V	24 V
  ● at output 4 at DC Rated value		24 V	24 V
  Total tolerance, static ±		3 %	3 %
  Static mains compensation, approx.		0.2 %	0.2 %
  Static load balancing, approx.		0.1 %	0.1 %
  Residual ripple peak-peak, max.		100 mV	100 mV
  Spikes peak-peak, max. (bandwidth: 20 MHz)		200 mV	200 mV
  Adjustment range		5 ... 28 V	5 ... 28 V
  Product function Output voltage adjustable		Yes	Yes
  Output voltage setting		via potentiometer; Derating > 24 V: 4%/V; max. 120 W per output	via potentiometer; Derating > 24 V: 4%/V; max. 240 W per output
  Status display		3-color LED for operating state module; 3-color LED per output for operating state output	3-color LED for operating state module; 3-color LED per output for operating state output
  Signaling		Relay contact (changeover contact, contact current capacity DC 60 V/0.3 A) for "Operating state OK" at power supply unit PSU8600	Relay contact (changeover contact, contact current capacity DC 60 V/0.3 A) for "Operating state OK" at power supply unit PSU8600
  On/off behavior		No overshoot of Vout (soft start)	No overshoot of Vout (soft start)
  Startup delay, max.		1.5 s; Without on-delay of the outputs	1.5 s; Without on-delay of the outputs
  connection of outputs operating		Simultaneous connecting-in of all outputs after device booting or delay time of 25 ms, 100 ms or "load-optimized" for sequential cutting-in of the outputs via DIP switches at power supply unit PSU8600 can be set	Simultaneous connecting-in of all outputs after device booting or delay time of 25 ms, 100 ms or "load-optimized" for sequential cutting-in of the outputs via DIP switches at power supply unit PSU8600 can be set
  Voltage increase time of the output voltage maximum		500 ms	500 ms
  Rated current value Iout rated		20 A	40 A
  Output current
  ● per output		5 A	10 A
  ● at output 1 Rated value		5 A	10 A
  ● at output 2 Rated value		5 A	10 A
  ● at output 3 Rated value		5 A	10 A
  ● at output 4 Rated value		5 A	10 A
  Current range		0 ... 20 A	0 ... 40 A
  ● Note		No increase in the maximum output power of the overall system SITOP PSU8600 via the expansion module SITOP CNX8600 possible	No increase in the maximum output power of the overall system SITOP PSU8600 via the expansion module SITOP CNX8600 possible
  Supplied active power typical		480 W	960 W
  Product feature parallel switching of outputs		No	No
  Parallel switching for enhanced performance		No	No
  Efficiency
  Efficiency at Vout rated, Iout rated, approx.		97 %	97 %
  Power loss at Vout rated, Iout rated, approx.		15 W	30 W
  Closed-loop control
  Dynamic mains compensation (Vin rated ±15 %), max.		0.1 %	0.1 %
  Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ.		0.4 %	0.4 %
  Setting time maximum		10 ms	10 ms
  Protection and monitoring
  Output overvoltage protection		< 35 V	< 35 V
  Property of the output Short-circuit proof		Yes	Yes
  Short-circuit protection		electronic overload cut-off	electronic overload cut-off
  adjustable response value current of current-dependent overload trip		0.5 ... 5 A	0.5 ... 10 A
  type of threshold value setting		via potentiometer	via potentiometer
  characteristics of electronic overload switch-off		Ia >1.0…<1.5 x Ia threshold permissible for 5 s; Ia limit (= 1.5 x Ia threshold) permissible for 200 ms	Ia >1.0…<1.5 x Ia threshold permissible for 5 s; Ia limit (= 1.5 x Ia threshold) permissible for 200 ms
  Reset		Via sensor per output	Via sensor per output
  Remote reset		Non-electrically isolated 24 V input (signal level "high" at > 15 V) at power supply unit PSU8600	Non-electrically isolated 24 V input (signal level "high" at > 15 V) at power supply unit PSU8600
  Overload/short-circuit indicator		3-color LED for operating state module; 3-color LED per output for operating state output	3-color LED for operating state module; 3-color LED per output for operating state output
  Interface
  Specification interface		Ethernet/PROFINET via power supply unit PSU8600	Ethernet/PROFINET via power supply unit PSU8600
  Safety
  Primary/secondary isolation		Yes	Yes
  Galvanic isolation		Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
  Protection class		Class III	Class III
  CE mark		Yes	Yes
  UL/cUL (CSA) approval		cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)	cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)
  Explosion protection		IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4 Gc; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T4	IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4 Gc; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T4
  FM approval		-	-
  CB approval		Yes	Yes
  Marine approval		GL, ABS	GL, ABS
  Degree of protection (EN 60529)		IP20	IP20
  EMC
  Emitted interference		EN 55022 Class B	EN 55022 Class B
  Noise immunity		EN 61000-6-2	EN 61000-6-2
  Operating data
  Ambient temperature
  ● during operation		-25 ... +60 °C	-25 ... +60 °C
  — Note		with natural convection	with natural convection
  ● during transport		-40 ... +85 °C	-40 ... +85 °C
  ● during storage		-40 ... +85 °C	-40 ... +85 °C
  Humidity class according to EN 60721		Climate class 3K3, no condensation	Climate class 3K3, no condensation
  Mechanics
  Connection technology		Plug-in terminals with screwed connection	Plug-in terminals with screwed connection
  Connections
  ● Output		1, 2, 3, 4: Two plug-in terminals (1, 2 and 3, 4) with 2 screwed connections each for 0.2 ... 2.5 mm²; Ground: Plug-in terminal with 3 screwed connections for 0.2 ... 2.5 mm²	1, 2, 3, 4: Two plug-in terminals (1, 2 and 3, 4) with 2 screwed connections each for 0.2 ... 2.5 mm²; Ground: Plug-in terminal with 3 screwed connections for 0.2 ... 2.5 mm²
  Product function
  ● removable terminal at output		Yes	Yes
  Suitability for interaction modular system		Yes	Yes
  Type of connection to system components		Via integrated connector	Via integrated connector
  Width of the enclosure		60 mm	60 mm
  Height of the enclosure		125 mm	125 mm
  Depth of the enclosure		150 mm	150 mm
  Required spacing
  ● top		50 mm	50 mm
  ● bottom		50 mm	50 mm
  ● left		0 mm	0 mm
  ● right		0 mm	0 mm
  Weight, approx.		1.15 kg	1.15 kg
  Product feature of the enclosure housing for side-by-side mounting		Yes	Yes
  Installation		Snaps onto DIN rail EN 60715 35x15	Snaps onto DIN rail EN 60715 35x15
  Mechanical accessories		Device identification label 20 mm × 7 mm, TI-grey 3RT2900-1SB20	Device identification label 20 mm × 7 mm, TI-grey 3RT2900-1SB20
  MTBF at 40 °C		499 861 h	499 861 h
  Other information		Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

  
  

  Дополнительно

  Device labeling plates

  3RT1900-1SB20