3-phase, basic units 24 V DC (PSU8600)

Заказные данные
(4)
Аксессуары
(7)

The ultra-slim 3-phase basic units of the SITOP PSU8600 power supply system include one Ethernet/PROFINET interface as well as one or four configurable outputs (voltage and current threshold) with selective monitoring. Additional units from the modular system can be added as required to the basic unit, without wiring overhead, in order to increase the number of outputs (CNX8600) or to extend the mains buffering time (BUF8600). Comprehensive diagnostic and maintenance information is available via PROFINET. It can be evaluated directly in SIMATIC S7 and visualized in SIMATIC WinCC. Energy management is also optimally supported by collecting the energy data for each output as well as individual activation and deactivation of the outputs via PROFIenergy.

Main product highlights

3-phase wide-range input 400 to 500 V 3 AC for global use
Extremely slim design with very high efficiency of up to 94%
Versions with a configurable output with up to 20 A or 40 A and selective monitoring
Versions with four integrated, individually configured outputs with up to 5 A or 10 A each and selective monitoring
Voltage and response threshold can be set separately and are infinitely adjustable for each output
Extra power with 1.5 times the rated current (5 s/min) for brief, operational overload
Integrated Ethernet/PROFINET interface (2 ports)
Easy configuration in the TIA Portal
Comprehensive diagnostic information during operation
Outputs can be deactivated and activated in a targeted manner with PROFIenergy
Individual expansion options from the modular system (expansion modules, buffer modules) without wiring overhead

Технические данные

Order number	6EP3436-8SB00-2AY0	6EP3437-8SB00-2AY0	6EP3436-8MB00-2CY0	6EP3437-8MB00-2CY0
Product	SITOP PSU8600	SITOP PSU8600	SITOP PSU8600	SITOP PSU8600
Power supply, type	24 V/20 A	24 V/40 A	24 V/20 A/4x 5 A	24 V/40 A/4x 10 A
Input
Input	3-phase AC	3-phase AC	3-phase AC	3-phase AC
Rated voltage value Vin rated	400 ... 500 V	400 ... 500 V	400 ... 500 V	400 ... 500 V
Voltage range AC	320 ... 575 V	320 ... 575 V	320 ... 575 V	320 ... 575 V
● Note	Derating 320 … 360 and 530 … 575 V	Derating 320 … 360 and 530 … 575 V	Derating 320 … 360 and 530 … 575 V	Derating 320 … 360 and 530 … 575 V
Wide-range input	Yes	Yes	Yes	Yes
Mains buffering at Iout rated, min.	15 ms; at Vin = 400 V; Prioritized voltage supply to the outputs at power failure via DIP switch can be selected (only with expansion module CNX8600)	15 ms; at Vin = 400 V; Prioritized voltage supply to the outputs at power failure via DIP switch can be selected (only with expansion module CNX8600)	15 ms; at Vin = 400 V; Prioritized supply Output 1 at power failure can be selected via DIP switch	15 ms; at Vin = 400 V; Prioritized supply Output 1 at power failure can be selected via DIP switch
Rated line frequency 1	50 Hz	50 Hz	50 Hz	50 Hz
Rated line frequency 2	60 Hz	60 Hz	60 Hz	60 Hz
Rated line range	47 ... 63 Hz	47 ... 63 Hz	47 ... 63 Hz	47 ... 63 Hz
Input current
● at rated input voltage 400 V	1.4 A	2.75 A	1.4 A	2.75 A
● at rated input voltage 500 V	1.1 A	2.2 A	1.1 A	2.2 A
Switch-on current limiting (+25 °C), max.	14 A	14 A	14 A	14 A
I²t, max.	1.2 A²·s	2.24 A²·s	1.2 A²·s	2.24 A²·s
Built-in incoming fuse	none	none	none	none
Protection in the mains power input (IEC 898)	Required: 3-pole connected miniature circuit breaker 6 ... 16 A characteristic C or circuit breaker 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489)	Required: 3-pole connected miniature circuit breaker 10 ... 16 A characteristic C or circuit breaker 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489)	Required: 3-pole connected miniature circuit breaker 6 ... 16 A characteristic C or circuit breaker 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489)	Required: 3-pole connected miniature circuit breaker 10 ... 16 A characteristic C or circuit breaker 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489)
Output
Output	Controlled, isolated DC voltage	Controlled, isolated DC voltage	Controlled, isolated DC voltage	Controlled, isolated DC voltage
Number of outputs	1	1	4	4
Rated voltage Vout DC	24 V	24 V	24 V	24 V
Output voltage
● at output 1 at DC Rated value	24 V	24 V	24 V	24 V
● at output 2 at DC Rated value			24 V	24 V
● at output 3 at DC Rated value			24 V	24 V
● at output 4 at DC Rated value			24 V	24 V
Total tolerance, static ±	3 %	3 %	3 %	3 %
Static mains compensation, approx.	0.2 %	0.2 %	0.2 %	0.2 %
Static load balancing, approx.	0.1 %	0.1 %	0.1 %	0.1 %
Residual ripple peak-peak, max.	100 mV	100 mV	100 mV	100 mV
Spikes peak-peak, max. (bandwidth: 20 MHz)	200 mV	200 mV	200 mV	200 mV
Adjustment range	5 ... 28 V	5 ... 28 V	5 ... 28 V	5 ... 28 V
Product function Output voltage adjustable	Yes	Yes	Yes	Yes
Output voltage setting	via potentiometer; Derating > 24 V: 4%/V; max. 480 W overall system	via potentiometer; Derating > 24 V: 4%/V; max. 960 W overall system	via potentiometer; Derating > 24 V: 4%/V; max. 120 W per output, max. 480 W overall system	via potentiometer; Derating > 24 V: 4%/V; max. 240 W per output, max. 960 W overall system
Status display	3-color LED for operating state device; LED for operating mode manual/remote; 4 LEDs for communication PROFINET; 3-color LED for operating state output	3-color LED for operating state device; LED for operating mode manual/remote; 4 LEDs for communication PROFINET; 3-color LED for operating state output	3-color LED for operating state device; LED for operating mode manual/remote; 4 LEDs for communication PROFINET; 3-color LED per output for operating state output; LED green for parallel operation Output 1 and 2 / 3 and 4	3-color LED for operating state device; LED for operating mode manual/remote; 4 LEDs for communication PROFINET; 3-color LED per output for operating state output; LED green for parallel operation Output 1 and 2 / 3 and 4
Signaling	Relay contact (changeover contact, contact current capacity DC 60 V/0.3 A) for "Operating state OK"	Relay contact (changeover contact, contact current capacity DC 60 V/0.3 A) for "Operating state OK"	Relay contact (changeover contact, contact current capacity DC 60 V/0.3 A) for "Operating state OK"	Relay contact (changeover contact, contact current capacity DC 60 V/0.3 A) for "Operating state OK"
On/off behavior	No overshoot of Vout (soft start)	No overshoot of Vout (soft start)	No overshoot of Vout (soft start)	No overshoot of Vout (soft start)
Startup delay, max.	1 s	1 s	1 s; Without on-delay of the outputs	1 s; Without on-delay of the outputs
connection of outputs operating	Simultaneous connecting-in of all outputs after device booting or delay time of 25 ms, 100 ms or "load-optimized" for sequential cutting-in of the outputs via DIP switches can be set (only with expansion module CNX8600)	Simultaneous connecting-in of all outputs after device booting or delay time of 25 ms, 100 ms or "load-optimized" for sequential cutting-in of the outputs via DIP switches can be set (only with expansion module CNX8600)	Simultaneous connecting-in of all outputs after device booting or delay time of 25 ms, 100 ms or "load-optimized" for sequential cutting-in of the outputs via DIP switches can be set	Simultaneous connecting-in of all outputs after device booting or delay time of 25 ms, 100 ms or "load-optimized" for sequential cutting-in of the outputs via DIP switches can be set
Voltage increase time of the output voltage maximum	500 ms	500 ms	500 ms	500 ms
Rated current value Iout rated	20 A	40 A	20 A	40 A
Output current
● per output	20 A	40 A	5 A	10 A
● at output 1 Rated value	20 A	40 A	5 A	10 A
● at output 2 Rated value			5 A	10 A
● at output 3 Rated value			5 A	10 A
● at output 4 Rated value			5 A	10 A
Current range	0 ... 20 A	0 ... 40 A	0 ... 20 A	0 ... 40 A
● Note	+50 ... +60 °C: Derating 2.5%/K; no derating in connection with expansion module CNX8600 and total load of the outputs at the basic device max. 240 W	+50 ... +60 °C: Derating 2.5%/K; no derating in connection with expansion module CNX8600 and total load of the outputs at the basic device max. 480 W	+50 ... +60 °C: Derating 2.5%/K; no derating in connection with expansion module CNX8600 and total load of the outputs at the basic device max. 240 W	+50 ... +60 °C: Derating 2.5%/K; no derating in connection with expansion module CNX8600 and total load of the outputs at the basic device max. 480 W
Supplied active power typical	480 W	960 W	480 W	960 W
Short-term overload current
● at short-circuit during operation typical	60 A	120 A
● Note	only in operation without CNX8600 extension module	only in operation without CNX8600 extension module
Duration of overloading capability for excess current
● at short-circuit during operation	25 ms	25 ms
Product feature parallel switching of outputs			Yes; Parallel circuit Output 1 with 2 or Output 3 with 4 can be selected via DIP switch	Yes; Parallel circuit Output 1 with 2 or Output 3 with 4 can be selected via DIP switch
Parallel switching for enhanced performance	Yes; suitable output characteristics via DIP switch can be selected	Yes; suitable output characteristics via DIP switch can be selected	No	No
Numbers of parallel switchable units for enhanced performance	2	2
Efficiency
Efficiency at Vout rated, Iout rated, approx.	93 %	93 %	93 %	93 %
Power loss at Vout rated, Iout rated, approx.	34 W	72 W	34 W	72 W
Power loss [W] during no-load operation maximum	12 W	20 W	12 W	20 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max.	0.1 %	0.1 %	0.1 %	0.1 %
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ.	0.4 %	0.4 %	0.4 %	0.4 %
Setting time maximum	10 ms	10 ms	10 ms	10 ms
Protection and monitoring
Output overvoltage protection	< 35 V	< 35 V	< 35 V	< 35 V
Property of the output Short-circuit proof	Yes	Yes	Yes	Yes
Short-circuit protection	Electronic overload shutdown; optional constant-current operation can be selected via DIP switch	Electronic overload shutdown; optional constant-current operation can be selected via DIP switch	electronic overload cut-off; optionally constant current operation can be selected for Output 4 via DIP switches	electronic overload cut-off; optionally constant current operation can be selected for Output 4 via DIP switches
adjustable response value current of current-dependent overload trip	2 ... 20 A	4 ... 40 A	0.5 ... 5 A	0.5 ... 10 A
type of threshold value setting	via potentiometer	via potentiometer	via potentiometer	via potentiometer
characteristics of electronic overload switch-off	Ia >1.0…<1.5 x Ia threshold permissible for 5 s; Ia limit (= 1.5 x Ia threshold) permissible for 200 ms	Ia >1.0…<1.5 x Ia threshold permissible for 5 s; Ia limit (= 1.5 x Ia threshold) permissible for 200 ms	Ia >1.0…<1.5 x Ia threshold permissible for 5 s; Ia limit (= 1.5 x Ia threshold) permissible for 200 ms	Ia >1.0…<1.5 x Ia threshold permissible for 5 s; Ia limit (= 1.5 x Ia threshold) permissible for 200 ms
characteristics of constant current operation	Ia limit (= 1.5 x Ia threshold) permissible for 5 s, afterwards Ia threshold continuous	Ia limit (= 1.5 x Ia threshold) permissible for 5 s, afterwards Ia threshold continuous	Ia limit (= 1.5 x Ia threshold) permissible for 5 s, afterwards Ia threshold continuous	Ia limit (= 1.5 x Ia threshold) permissible for 5 s, afterwards Ia threshold continuous
Reset	Via sensor	Via sensor	Via sensor per output	Via sensor per output
Remote reset	Non-electrically isolated 24 V input (signal level "high" at > 15 V)	Non-electrically isolated 24 V input (signal level "high" at > 15 V)	Non-electrically isolated 24 V input (signal level "high" at > 15 V)	Non-electrically isolated 24 V input (signal level "high" at > 15 V)
Overcurrent overload capability in normal operation	Total system overloadable 150% Ia rated to 5 s/min	Total system overloadable 150% Ia rated to 5 s/min	Total system overloadable 150% Ia rated to 5 s/min	Total system overloadable 150% Ia rated to 5 s/min
Overload/short-circuit indicator	3-color LED for operating state device; 3-color LED for operating state output	3-color LED for operating state device; 3-color LED for operating state output	3-color LED for operating state device; 3-color LED per output for operating state output	3-color LED for operating state device; 3-color LED per output for operating state output
Interface
Specification interface	Ethernet/PROFINET	Ethernet/PROFINET	Ethernet/PROFINET	Ethernet/PROFINET
Safety
Primary/secondary isolation	Yes	Yes	Yes	Yes
Galvanic isolation	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
Protection class	Class I	Class I	Class I	Class I
Leakage current
● maximum	3.5 mA	3.5 mA	3.5 mA	3.5 mA
CE mark	Yes	Yes	Yes	Yes
UL/cUL (CSA) approval	cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)	cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)	cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)	cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)
Explosion protection	IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4 Gc; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T4	IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4 Gc; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T4	IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4 Gc; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T4	IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4 Gc; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T4
FM approval	-	-	-	-
CB approval	Yes	Yes	Yes	Yes
Marine approval	GL, ABS	GL, ABS	GL, ABS	GL, ABS
Degree of protection (EN 60529)	IP20	IP20	IP20	IP20
EMC
Emitted interference	EN 55022 Class B	EN 55022 Class B	EN 55022 Class B	EN 55022 Class B
Supply harmonics limitation	EN 61000-3-2	EN 61000-3-2	EN 61000-3-2	EN 61000-3-2
Noise immunity	EN 61000-6-2	EN 61000-6-2	EN 61000-6-2	EN 61000-6-2
Operating data
Ambient temperature
● during operation	-25 ... +60 °C	-25 ... +60 °C	-25 ... +60 °C	-25 ... +60 °C
— Note	with natural convection	with natural convection	with natural convection	with natural convection
● during transport	-40 ... +85 °C	-40 ... +85 °C	-40 ... +85 °C	-40 ... +85 °C
● during storage	-40 ... +85 °C	-40 ... +85 °C	-40 ... +85 °C	-40 ... +85 °C
Humidity class according to EN 60721	Climate class 3K3, no condensation	Climate class 3K3, no condensation	Climate class 3K3, no condensation	Climate class 3K3, no condensation
Mechanics
Connection technology	Plug-in terminals with screwed connection	Plug-in terminals with screwed connection	Plug-in terminals with screwed connection	Plug-in terminals with screwed connection
Connections
● Supply input	L1, L2, L3, PE: Plug-in terminal with 1 screwed connection each for 0.08 ... 4 mm² single-wire / fine stranded	L1, L2, L3, PE: Plug-in terminal with 1 screwed connection each for 0.08 ... 4 mm² single-wire / fine stranded	L1, L2, L3, PE: Plug-in terminal with 1 screwed connection each for 0.08 ... 4 mm² single-wire / fine stranded	L1, L2, L3, PE: Plug-in terminal with 1 screwed connection each for 0.08 ... 4 mm² single-wire / fine stranded
● Output	Output: plug-in terminals with 2 screw connectors for 0.08 ... 4 mm²; 0 V: screw terminal with 3 screw connectors for 0.08 ... 4 mm²	Output: plug-in terminals with 2 screw connectors for 0.2 ... 10 mm²; 0 V: screw terminal with 3 screw connectors for 0.2 ... 10 mm²	1, 2, 3, 4: Two plug-in terminals (1, 2 and 3, 4) with 2 screwed connections each for 0.2 ... 2.5 mm²; 0 V: Plug-in terminal with 3 screwed connections for 0.08 ... 4 mm²	1, 2, 3, 4: Two plug-in terminals (1, 2 and 3, 4) with 2 screwed connections each for 0.2 ... 2.5 mm²; 0 V: Plug-in terminal with 3 screwed connections for 0.5 ... 10 mm²
● Auxiliary	RST (Reset): Plug-in terminal (together with alarm signal) with 1 screwed connection for 0.2 ... 1.5 mm²	RST (Reset): Plug-in terminal (together with alarm signal) with 1 screwed connection for 0.2 ... 1.5 mm²	RST (Reset): Plug-in terminal (together with alarm signal) with 1 screwed connection for 0.2 ... 1.5 mm²	RST (Reset): Plug-in terminal (together with alarm signal) with 1 screwed connection for 0.2 ... 1.5 mm²
Connections signaling contact	11, 12, 14 (alarm signal): Plug-in terminal (together with Reset) with 1 screwed connection each for 0.2 ... 1.5 mm²	11, 12, 14 (alarm signal): Plug-in terminal (together with Reset) with 1 screwed connection each for 0.2 ... 1.5 mm²	11, 12, 14 (alarm signal): Plug-in terminal (together with Reset) with 1 screwed connection each for 0.2 ... 1.5 mm²	11, 12, 14 (alarm signal): Plug-in terminal (together with Reset) with 1 screwed connection each for 0.2 ... 1.5 mm²
Product function
● removable terminal at input	Yes	Yes	Yes	Yes
● removable terminal at output	Yes	Yes	Yes	Yes
Design of the interface for communication	PROFINET/Ethernet: two RJ45 sockets (2-port switch)	PROFINET/Ethernet: two RJ45 sockets (2-port switch)	PROFINET/Ethernet: two RJ45 sockets (2-port switch)	PROFINET/Ethernet: two RJ45 sockets (2-port switch)
Suitability for interaction modular system	Yes	Yes	Yes	Yes
Width of the enclosure	80 mm	125 mm	100 mm	125 mm
Height of the enclosure	125 mm	125 mm	125 mm	125 mm
Depth of the enclosure	150 mm	150 mm	150 mm	150 mm
Required spacing
● top	50 mm	50 mm	50 mm	50 mm
● bottom	50 mm	50 mm	50 mm	50 mm
● left	0 mm	0 mm	0 mm	0 mm
● right	0 mm	0 mm	0 mm	0 mm
Weight, approx.	1.8 kg	2.6 kg	2 kg	2.6 kg
Product feature of the enclosure housing for side-by-side mounting	Yes	Yes	Yes	Yes
Installation	Snaps onto DIN rail EN 60715 35x15	Snaps onto DIN rail EN 60715 35x15	Snaps onto DIN rail EN 60715 35x15	Snaps onto DIN rail EN 60715 35x15
Electrical accessories	Expansion modules CNX8600, buffer modules BUF8600	Expansion modules CNX8600, buffer modules BUF8600	Expansion modules CNX8600, buffer modules BUF8600	Expansion modules CNX8600, buffer modules BUF8600
Mechanical accessories	Device identification label 20 mm × 7 mm, TI-grey 3RT2900-1SB20	Device identification label 20 mm × 7 mm, TI-grey 3RT2900-1SB20	Device identification label 20 mm × 7 mm, TI-grey 3RT2900-1SB20	Device identification label 20 mm × 7 mm, TI-grey 3RT2900-1SB20
MTBF at 40 °C				226 272 h
Other information	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Дополнительно

SITOP CNX8600 4 x 5 A expansion module	6EP4436-8XB00-0CY0
For SITOP PSU8600 Output: 24 V DC/4 x 5 A
SITOP CNX8600 4 x 10 A expansion module	6EP4437-8XB00-0CY0
For SITOP PSU8600 Output: 24 V DC/4 x 10 A
SITOP BUF8600 100 ms buffer module	6EP4297-8HB00-0XY0
For SITOP PSU8600 Buffer capacity 100 ms/40 A
SITOP BUF8600 300 ms buffer module	6EP4297-8HB10-0XY0
For SITOP PSU8600 Buffer capacity 300 ms/40 A
SITOP BUF8600 4 s buffer module	6EP4293-8HB00-0XY0
For SITOP PSU8600 Buffer capacity 4 s/40 A
SITOP BUF8600 10 s buffer module	6EP4295-8HB00-0XY0
For SITOP PSU8600 Buffer capacity 10 s/40 A
Device labeling plates	3RT1900-1SB20

3-phase, basic units 24 V DC (PSU8600)

Информационные материалы

Main product highlights

Технические данные

Дополнительно