VSM10 Voltage Sensing Module

• Заказные данные
  (1)
• Аксессуары
  (1)
• Информационные материалы

  Информационные материалы

  

  VSM10 Voltage Sensing Module

  The VSM10 Voltage Sensing Module is capable of measuring the line voltage waveform precisely and helps Line Modules to continue functioning properly under difficult supply conditions, for example, in the case of extreme voltage fluctuations or brief supply interruptions.

  The VSM10 Voltage Sensing Module is integrated in Active Interface Modules in chassis format and Smart Line Modules in chassis format. It can be optionally deployed for all Active Line Modules in bookside format and for 16 kW and 36 kW Smart Line Modules.

  Дизайн

  The VSM10 Voltage Sensing Module has the following connections and interfaces:

  • 1 connection for direct line voltage sensing up to 690 V
  • 1 connection for line voltage sensing via voltage transformers; maximum voltage 100 V
  • 2 analog inputs (reserved for monitoring of resonance in the Active Interface Module in chassis format)
  • 1 temperature sensor input for KTY84‑130, Pt1000 or PTC (Pt1000 can be used from firmware V4.7 HF17)
  • 1 DRIVE‑CLiQ socket
  • 1 connection for the electronics power supply via the 24 V DC power supply connector
  • 1 PE (protective earth) connection

  The status of the VSM10 Voltage Sensing Modules is indicated via a multi-color LED.

  The VSM10 Voltage Sensing Module can be snapped onto a TH 35 standard mounting rail in accordance with EN 60715 (IEC 60715).

  Интеграция

  The VSM10 Voltage Sensing Module can communicate with the following Control Units via DRIVE‑CLiQ:

  • CU320‑2 Control Unit
  • SINUMERIK Control Unit
  • SIMOTION D Control Unit or Controller Extension

  

  Connection example of VSM10 Voltage Sensing Module

  Технические данные

  	VSM10 Voltage Sensing Module 6SL3053-0AA00-3AA1
  Current requirement, max. at 24 V DC	0.2 A
  Conductor cross-section, max.	2.5 mm2
  Power loss, max.	10 W
  Line voltage detection
  Insulation resistance neutral point – ground when jumper is not inserted	>10 MΩ
  Input resistance
  Terminal X521	>362 kΩ/phase
  Terminal X522	>2.5 MΩ/phase
  Analog inputs (reserved for monitoring an Active Interface Module in chassis format)
  Internal resistance, approx. (between differential inputs)	100 kΩ
  Resolution	12 bits + sign
  PE connection	M4 screw
  Dimensions
  Width	50 mm (1.97 in)
  Height	151 mm (5.94 in)
  Depth	110 mm (4.33 in)
  Weight, approx.	1 kg (2.21 lb)
  Certificate of suitability	cULus