SIPLUS S7-300 safety protector

• Заказные данные
  (1)
• Аксессуары
  (1)
• Информационные материалы

  Информационные материалы

  • Permits combined operation of fail-safe signal modules in safety mode and standard S7-300 modules in the same ET 200M system.
  • The safety protector is not required if the safety class SIL 3 or safety category < Cat. 4 is to be achieved.

  Note:

  SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme specific information was added.

  Технические данные

  Order number		6AG1195-7KF00-2XA0
  		SIPLUS S7-300 TRENNBAUGRUPPE
  Standards, approvals, certificates
  CE mark		Yes
  UL approval		Yes; File E239877
  FM approval		Yes; CofC 3028431
  Ambient conditions
  Ambient temperature during operation
  ● min.		-25 °C; = Tmin
  ● max.		60 °C; = Tmax
  Ambient temperature during storage/transportation
  ● min.		-40 °C
  ● max.		70 °C
  Extended ambient conditions
  ● relative to ambient temperature-atmospheric pressure-installation altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
  Relative humidity
  — With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
  Resistance
  — against biologically active substances / conformity with EN 60721-3-3		Yes
  — against chemically active substances / conformity with EN 60721-3-3		Yes
  — against mechanically active substances / conformity with EN 60721-3-3		Yes
  Weights
  Weight, approx.		10 g