SIPLUS master interface modules for IM 151 CPU

Introduced in 2012, the successor system of the tried and tested SIPLUS ET 200S, the SIPLUS ET 200SP, brings a number of advantages.

For this reason, we recommend the use of the successor system SIPLUS ET 200SP for new automation concepts.

In addition to the well-known good system properties of the SIPLUS ET 200S such as

Finely modular design for adaptation to the automation task in hand
Permanent wiring (replacement of the I/O modules without affecting the wiring, even during operation)
Connection to PROFINET and PROFIBUS

the SIPLUS ET 200SP offers further innovative system advantages compared to the SIPLUS ET 200S:

Faster and more compact setup

Up to 50 % reduced space requirements in the control cabinet, with unchanged cross-section area
No tools needed for one-handed wiring thanks to push-in terminals
Reduced part variance with increased scope of functions
System-integrated self-assembling load group formation without power modules
Up to 16 channels per module and 1024 channels per station
Flexible PROFINET connection via BusAdapter (RJ45, FastConnect, plastic or glass fiber-optic cables), also as integrated media converter
System-integrated shield connection

Increased performance

Short response times and isochronous mode for motion applications
High-speed data acquisition (digital from 1 µs, analog from 50 µs) and transmission (up to 100 Mbps):
for digital signals with time-based I/O for precisely timed controlling independent of bus cycles;
for analog and digital signal oversampling, n-fold acquisition or output of signals within a PN cycle.

Additional functions

Measurement of machine consumption, e.g. current, using an integrated energy meter (up to 480 V)
Comprehensive diagnostics function (wire break and short-circuit) integrated by default even in Standard-class modules
System-integrated fail-safe modules (PROFIsafe) with simplified switchless address setting
Enhanced configuration control for easy option handling
Operation with gaps
Multi hot swapping
Larger module range (AS-i, AS-i Safety, additional CPU versions, Open Controller, etc.)
MSI/MSO: Simultaneous access to input and output data from up to 4 controllers
Adaptation of measuring range: Increased resolution by adapting the measuring range to a limited section of a measuring range supported by the analog input module
Station expansion through system-integrated IP67 components (ET 200AL)
Block I/O in degree of protection IP20 with 32 channels, comprising terminal block and electronic block
Discretely modular expansion to maximum of 128 channels or 12 modules
The complete ET 200S module spectrum can be used (with the exception of PROFIsafe modules)
Separation of connections and electronics with permanent wiring
Screw-type and spring-loaded terminal connections
Standard terminal block with 2-wire connection system; 3-wire and 4-wire systems available using additional terminals
Installation on a mounting rail
Hot swapping of expansion modules
Communication via PROFIBUS
Up to 100 bytes for inputs and outputs (address space)

Технические данные

Order number		6AG1138-4HA00-7AB0
		SIPLUS ET200S DP-Masteranschaltung
Hardware configuration
Number of modules per CPU		1
Ambient conditions
Ambient temperature during operation
● min.		-40 °C; = Tmin
● max.		70 °C; = Tmax
Extended ambient conditions
● relative to ambient temperature-atmospheric pressure-installation altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3		Yes; Class 3C4 incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width		35 mm
Height		119.5 mm
Depth		75 mm
Weights
Weight, approx.		100 g