LOGO! CMK2000 communication module

• Заказные данные
  (1)
• Информационные материалы

  Информационные материалы

  • Expansion module for LOGO! 8 basic versions
  • For integrating LOGO! 8 in KNX installations
  • With 24 digital inputs, 20 digital outputs as well as 8 analog inputs and outputs for processing process signals via KNX.

  Область применения

  The LOGO! CMK2000 communication module can be used to integrate the LOGO! 8 series of logic modules in the KNX building system bus. LOGO! 8 is designed for smaller automation solutions. It can now be used in combination with the new communication module for building automation tasks, such as surveillance, access control, air-conditioning, lighting, shading and watering through to pump control.

  Функции

  The LOGO! CMK2000 KNX module communicates via Ethernet with LOGO! 8. It transmits sensor data from KNX bus nodes to the logic module, where they are combined with logic functions. LOGO! control commands are transmitted to KNX actuators via the communication module. 50 KNX communication objects can be configured, and linked in the LOGO! program with counters, setpoints, and parameters to create automation solutions.

  LOGO! 8 also makes its own functionality available to the other KNX nodes via the LOGO! CMK2000 communication module. There are 24 digital inputs, 20 digital outputs as well as 8 analog inputs and outputs in the maximum hardware configuration. LOGO! 8 also enables the date and time to be synchronized for the nodes in the KNX system.

  Технические данные

  Order number		6BK1700-0BA20-0AA0
  		LOGO! CMK2000
  General information
  Firmware version
  ● FW update possible		Yes
  Installation type/mounting
  Mounting		on 35 mm DIN rail, 4 spacing units wide
  Supply voltage
  Rated value (DC)		24 V
  ● 12 V DC		No
  ● 24 V DC		Yes
  permissible range, lower limit (DC)		19.2 V
  permissible range, upper limit (DC)		28.8 V
  Rated value (AC)
  ● 24 V AC		No
  Input current
  Current consumption, max.		0.04 A
  Power loss
  Power loss, max.		1.1 W
  Memory
  Flash		Yes
  Time of day
  Clock synchronization
  ● supported		Yes
  Interfaces
  Number of industrial Ethernet interfaces		1; Ethernet, 1 port, RJ45
  Number of other interfaces		1; EIB/KNX
  Transmission rate, max.		100 Mbit/s over Ethernet, 9 600 bit/s over KNX
  Protocols
  EIB/KNX		Yes
  Communication functions
  Web server
  ● supported		Yes
  Interrupts/diagnostics/status information
  Diagnostics indication LED
  ● RUN/STOP LED		Yes
  EMC
  Emission of radio interference acc. to EN 55 011
  ● Limit class B, for use in residential areas		Yes; In accordance with EN 61000-6-3
  Degree and class of protection
  Degree of protection acc. to EN 60529
  ● IP20		Yes
  Standards, approvals, certificates
  CE mark		Yes
  CSA approval		Yes
  UL approval		Yes
  cULus		Yes
  FM approval		No
  RCM (formerly C-TICK)		No
  KC approval		Yes
  EAC (formerly Gost-R)		Yes
  according to VDE 0631		No
  Marine approval
  ● Marine approval		No
  Ambient conditions
  Ambient temperature during operation
  ● min.		0 °C
  ● max.		55 °C
  Ambient temperature during storage/transportation
  ● min.		-40 °C
  ● max.		70 °C
  Relative humidity
  ● Operation, max.		95 %
  Connection method
  Design of plug-in connection		KNX terminal 0.6 mm² - 1.0 mm²
  Power supply		2 screw-type terminals: L+, M 0.5 mm² - 2.5 mm² Screw-type terminal: FE 0.5 mm² ... 6.0 mm²
  Dimensions
  Width		71.5 mm; 4 WU
  Height		90 mm
  Depth		58.5 mm
  Weights
  Weight, approx.		0.14 kg