- Каталог оборудования Siemens
- Каталог продуктов Siemens Industry
- Приводная техника
- Техника автоматизации
- Системы автоматизации
- Системы визуализации SIMATIC HMI
- Системы идентификации
- Промышленные коммуникации SIMATIC NET
- Промышленные аппараты управления SIRIUS
- Промышленные информационные технологии
- Управление на базе РС
- Системы управления процессом
- Контрольно-измерительные приборы
- Анализаторы процесса
- Блоки питания SITOP
- Продукты для специальных требований
- Модули с расширенным температурным диапазоном SIPLUS
- Промышленные системы автоматизации SIMATIC
- Программируемые контроллеры
- SIPLUS LOGO!
- Базовые контроллеры
- Модульные контроллеры SIMATIC S7
- Distributed Controller
- Распределенная периферия SIMATIC ET200
- Программируемые контроллеры
- Система управления перемещением SIMOTION
- Распределенные системы управления
- Системы оперативного управления и мониторинга
- Промышленные коммуникации
- Аппаратура управления
- Блоки питания
- Дополнения SIPLUS
- Промышленные системы автоматизации SIMATIC
- Системы телеметрии
- IO Systems for heating units
- Automatic door controls
- Condition monitoring systems
- Time synchronization
- Модули с расширенным температурным диапазоном SIPLUS
- Energy
- Автоматизация и безопасность зданий
- Низковольтная коммутационная техника
- Технология безопасности
- Системные решения и продукты для отраслей
- Сервис
- Заказные данные (1)
- Информационные материалы
Информационные материалы
- Digital inputs as supplement to the integral I/O of the CPUs
- Approved in accordance with the railway standards EN 50155, EN 15121, EN 50124, EN 50125 and EN 45545 for use in rail traffic
- For flexible adaptation of the controller to the corresponding task
- For subsequent expansion of the system with additional inputs
Область применения
Digital input modules allow the connection of the controller to digital signals of the process.
This provides users with the following advantages:
- Optimum adaptation:
with signal modules which can be mixed as desired, users can adapt their controllers exactly to the relevant task. This avoids superfluous investments. - Flexibility:
if the task is expanded subsequently, the controller can be upgraded. Updating of the user program is extremely simple.
Функции
The SM 1221 digital input signal modules convert the level of the external digital signals from the process into the internal signal level of the S7-1200.
Технические данные
Order number
6AG2221-1BF32-1XB0
SIPLUS S7-1200 SM 1221 8DI RAIL
General information
Product type designation
SM 1221 DI 8x24 VDC
Supply voltage
Rated value (DC)
● 24 V DC
Yes
permissible range, lower limit (DC)
20.4 V
permissible range, upper limit (DC)
28.8 V
Input current
from backplane bus 5 V DC, max.
105 mA
Digital inputs
● from load voltage L+ (without load), max.
4 mA; per channel
Output voltage
Power supply to the transmitters
● present
Yes
Power loss
Power loss, typ.
1.5 W
Digital inputs
Number of digital inputs
8
● in groups of
2
Input characteristic curve in accordance with IEC 61131, type 1
Yes
Number of simultaneously controllable inputs
all mounting positions
— up to 40 °C, max.
8
horizontal installation
— up to 40 °C, max.
8
— up to 50 °C, max.
8
vertical installation
— up to 40 °C, max.
8
Input voltage
● Type of input voltage
DC
● Rated value (DC)
24 V
● for signal "0"
5 V DC at 1 mA
● for signal "1"
15 V DC at 2.5 mA
Input current
● for signal "0", max. (permissible quiescent current)
1 mA
● for signal "1", min.
2.5 mA
● for signal "1", typ.
4 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable
Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four
for interrupt inputs
— parameterizable
Yes
Cable length
● shielded, max.
500 m
● unshielded, max.
300 m
Interrupts/diagnostics/status information
Alarms
Yes
Diagnostic functions
Yes
Alarms
● Diagnostic alarm
Yes
Diagnostic messages
● Monitoring the supply voltage
Yes
Diagnostics indication LED
● for status of the inputs
Yes
● for maintenance
Yes
● Status indicator digital input (green)
Yes
Potential separation
Potential separation digital inputs
● between the channels, in groups of
2
Isolation
Isolation tested with
According to EN 50155 (routine test)
Degree and class of protection
Degree of protection acc. to EN 60529
● IP20
Yes
Standards, approvals, certificates
Railway application
● EN 50121-3-2
Yes; EMC for rail vehicles
● EN 50121-4
Yes; EMC for signal and telecommunications systems
● EN 50124-1
Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.5 kV; UNm = 24 V DC
● EN 50125-1
Yes; Rail vehicles - see ambient conditions
● EN 50125-2
Yes; Stationary electrical equipment - see ambient conditions
● EN 50125-3
Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track)
● EN 50155
Yes; Rail vehicles - temperature class T1, horizontal mounting position, salt spray Class ST2
● EN 61373
Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B
● Fire protection acc. to EN 45545-2
Yes; Rail vehicles - verification on request
Ambient conditions
Free fall
● Fall height, max.
0.3 m; five times, in product package
Ambient temperature during operation
● min.
-25 °C; = Tmin; Startup @ -25 °C
● max.
60 °C; = Tmax; +70 °C for 10 minutes (T1 acc. to EN 50155) for horizontal mounting position
Ambient temperature during storage/transportation
● min.
-40 °C
● max.
70 °C
Extended ambient conditions
● relative to ambient temperature-atmospheric pressure-installation altitude
Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.
100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3
Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against biologically active substances/conformity with EN 60721-3-5
Yes; Class 5B2 mold and fungal spores (excluding fauna). The supplied plug covers must remain in place over the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3
Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances/conformity with EN 60721-3-5
Yes; Class 5C3 (RH < 75%) including salt spray according to EN 50155 (ST2). The supplied plug covers must remain in place over the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3
Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances/conformity with EN 60721-3-5
Yes; Class 5S3 including sand and dust. The supplied plug covers must remain in place over the unused interfaces during operation!
Connection method
required front connector
Yes
Mechanics/material
Enclosure material (front)
● Plastic
Yes
Dimensions
Width
45 mm
Height
100 mm
Depth
75 mm
Weights
Weight, approx.
170 g
Other
Note:
For use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A Online Support article 109736776
