SIPLUS Control Units

• Заказные данные
  (2)
• Информационные материалы

  Информационные материалы

  

  SIPLUS G120 CU 240E

  The control unit performs closed-loop control functions for the converter.
  The CU240B‑2 and CU240E‑2 are designed as standard control units for all of the usual applications involving V/f or vector control.

  • CU240B‑2 series with basic I/O quantity structure, ideal for a large number of applications
  • CU240E-2 series with standard I/O quantity structure and integrated safety technology

  The CU240B-2 and CU240E‑2 control units can be combined with the following power modules:

  PM230, IP20 degree of protection; PM240-2; PM240; PM250

  Note:

  SIPLUS extreme products are based on SINAMICS standard products. The contents listed here were taken from the corresponding standard products. SIPLUS extreme-specific information was added.

  Технические данные

  Order number			6AG1244-0BB12-2FA0	6AG1244-0BB12-2PA1
  product brandname			SIPLUS
  Product designation			Controller
  General technical data:
  Design of the product			CU240E-2 PN	CU240E-2 DP
  Product function
  ● vector control with encoder			No
  ● vector control without encoder			Yes
  Product function for U/f control
  ● ECO mode linear or quadratic			Yes
  ● flux current control			Yes
  ● linear or quadratic parameterization			Yes
  Operating voltage
  ● from external supply voltage		V	28.8 ... 20.4
  ● from power module		V	24
  Input voltage at analog inputs as voltage inputs
  ● for signal <0> to <1>		V	4
  ● for signal <1> to <0>		V	1.6
  Consumed current maximum		A	0.5
  AWG number as coded connectable conductor cross section for signal line			30 ... 16
  Power loss [W] maximum		W	5.5
  Protection class IP			IP20
  Width		mm	73
  Height		mm	199
  Depth		mm	46
  Net weight		kg	0.49
  Inputs/ Outputs:
  Type of analog input			Differential input
  ● Note			Switchable between voltage (-10 ... +10 V) and current (0/4 ... 20 mA) using a DIP switch
  Number of analog inputs			2
  ● Note			The differential analog inputs can be configured as supplementary digital inputs
  Number of digital inputs			6
  ● Note			Optically isolated, free reference potential (own potential group), NPN/PNP-logic selectable via wiring
  Number of digital inputs with fail-safe			1
  ● Number of digital inputs with fail-safe Note			Use of 2 × DI Standard
  Number of digital outputs as relay change-over contact			2
  Number of digital outputs as transistor			1
  Communication:
  Number of interfaces
  ● acc. to RS 485			0	1
  ● acc. to PROFINET			2	0
  Protocol is supported PROFIBUS protocol			No	Yes
  Ambient conditions:
  Relative humidity maximum		%	100
  ● Note			RH, incl. condensation/frost permitted (no commissioning in bedewed state)
  Ambient temperature
  ● during operation			-20 ... +55
  ● during storage			-40 ... +70
  Ambient temperature [°F]
  ● during operation			-4 ... +131
  — Note			A derating of 3 K/1000 m has to be applied to the Control Units from an installation altitude of 1000 m above sea level
  ● during storage			-40 ... +158
  Resistance to biologically active substances conformity acc. to EN 60721-3-3			Yes
  Resistance to biologically active substances			Class 3B2 acc. to EN 60721-3-3, mold and fungal spores (except fauna)
  ● conformity acc. to EN 60721-3-3 Note			The supplied plug covers must remain in place over the unused interfaces during operation!
  conformity acc. to EN 60721-3-3			Yes
  Resistance to chemically active substances			Class 3C4 acc. to EN 60721-3-3, including salt spray acc. to EN 60068-2-52 (severity level 3)
  ● conformity acc. to EN 60721-3-3 Note			Compliant with EN 60721-3-3, Class 3C4 incl. salt spray in accordance with EN 60068-2-52 (severity 3); the supplied plug covers must remain in place on the unused interfaces during operation.
  Resistance to mechanically active substances conformity acc. to EN 60721-3-3			No
  Certificate of suitability			CE / TÜV
  Certificate of suitability for CE marking			Low-voltage directive 2006/95/EC