Access MyMachine /OPC UA

• Заказные данные
  (1)
• Информационные материалы

  Информационные материалы

  OPC UA (Unified Architecture) is a standardized, industrial communication protocol for access to control data, e.g. by control systems. Variables can be read from and written to a SINUMERIK 840D sl and SINUMERIK 828D via this communication protocol with the SINUMERIK Integrate Access MyMachine /OPC UA software option.

  Область применения

  	Hardware	CNC software option
  SINUMERIK Integrate for engineering Access MyMachine /OPC UA	SINUMERIK 840D sl SINUMERIK Operate NCU 710.3B PN NCU 720.3B PN NCU 730.3B PN PCU 50.5 Windows 7	SINUMERIK Integrate for engineering Access MyMachine /OPC UA Software option P67
  	or SINUMERIK 828D SINUMERIK Operate PPU2xx.3

  
  
  

  Функции

  An OPC UA server was integrated in SINUMERIK 840D sl and SINUMERIK 828D as from software version 4.5 SP3.

  A configuration dialog is integrated into SINUMERIK Operate after the software option is activated in software version 4.7 SP1. An ADMIN user is then set up with password identification in order to connect an OPC UA client to the OPC UA server. Various read and write permissions can also be assigned. Access is possible to, e.g., CNC and PLC data, GUDs, MDs, setting data.

  The number of SINUMERIK variables that can be observed simultaneously is limited:

  • SINUMERIK 840D sl
    max. 200 variables
  • SINUMERIK 828D software version 4.5
    max. 20 variables
  • SINUMERIK 828D software version 4.7
    max. 100 variables

  Интеграция

  Requirements:

  • SINUMERIK 840D sl with SINUMERIK Operate
  • SINUMERIK 828D with SINUMERIK Operate

   

  Дальнейшая информация

  You will find further information in the "Updates" at:

  https://support.industry.siemens.com

   

  You can obtain technical support and advice from:

  Siemens AG
  Digital Factory

  Stuttgart office
  Competence Center Machine Tools

  Fax: +49 711 137-2838

  E-mail: info.mc-hmi-oa@siemens.com