Access MyMachine /P2P

• Заказные данные
  (4)
• Информационные материалы

  Информационные материалы

  

  Commissioning support and remote diagnostics with SINUMERIK Operate

  SINUMERIK Integrate Access MyMachine /P2P supports the commissioning of machines with SINUMERIK Operate (software version 2.6 and higher) using a standard Windows PC. Its scope of functions includes the exchange of files between the service PC and the control as well as operation of the HMI user interface. EasyScreen texts, alarm texts, tool management texts and other texts can be edited easily.

  The file exchange functionality permits access from the NCU to files stored on the CF card and to files in the NCK. Various user profiles are also supported.

  The file exchange only requires the Access MyMachine /P2P software. This is installed on the PC (direct access via X127 without a TS adapter does not require the Access MyMachine/P2P option).

  If remote access, e.g. via modem, to the HMI user interface is required, the approved modem for this application is the TS Adapter IE (2 versions: analog and ISDN telecommunication networks, only via the X127 service interface) (requires Access MyMachine/P2P option).

  Функции

  Remote control, monitoring and administration

  • File transfer to CF card and CNC file system
  • Connection is established following confirmation by the operator
  • Status display on the operator panel
  • Optional teleservice software:
    (requires Access MyMachine /P2P option)
    Machine connections can be maintained centrally and access data administered via remote connections.

  File functions

  Access MyMachine /P2P allows simple file management on your PC and on the SINUMERIK control systems.

  • Data transfer between SINUMERIK and PC, data transfer to CF card and CNC file system.
  • Generation and restoration of images from the CF card of the CNC control for data backup purposes.
  • Writing existing images to a CF card.
  • Loading files directly to the control system and from the CNC control to the PC.

  Support during commissioning

  • Managing the CNC data of the CNC control.
  • Files can be copied directly from the PC to the CNC, and from the CNC to the PC.
  • Monitoring processes and remote control of the SINUMERIK via a remote control function.
  • Saving the screenshot of the HMI on the PC.

  Presentation of the CNC control and better support in the event of a fault

  • Editing the following user files on the PC:
    • PLC alarm texts (oem_alarms_plc)
    • Cycle alarm texts (oem_alarms_cycles)
    • Part program messages (oem_partprogram_messages)
    • EasyScreen files
    • Tool management texts
    • EasyExtend files (oem_aggregate)
    • Maintenance planner files (oem_maintenance)
  • Creating and loading an archive on the CNC control
  • Managing user files with the following options:
    • Creating a project OFFLINE
    • Creating a project where the files are automatically copied from the CNC control
    • Copying individual files to the CNC control with the project dialog, or copying from the CNC control to the project
    • Deleting user files using the project dialog on the CNC control

  Интеграция

  The components can be connected via X127 (X120/X130 have not been released)

  • Point-to-point connection in combination with TS Adapter IE (analog, ISDN modem)

  • Ethernet in local networks (LAN)

  • Internet (VPN), taking local IT security regulations (IT Policy) into account

  Особенности

  Cost savings in service thanks to:

  • Less frequent service calls for the machines
  • More efficient deployment of on-site service personnel
  • Better preparation of service calls

  Machine availability is enhanced thanks to:

  • Rapid online presence on site
  • Rapid file transfer to and from the machine