Товаров
  
корзина пуста
  • Каталог оборудования Siemens
Системные решения и продукты для отраслей
›
Производственные машины
›
Компоненты автоматизации для станков
›
SINUMERIK 808 with SINAMICS V60/V70
›
SINUMERIK 808D ADVANCED system
›
Example package for Milling with SINUMERIK 808D ADVANCED M

Example package for Milling with SINUMERIK 808D ADVANCED M

  • Информационные материалы

    Информационные материалы

    The following kit is an example for a vertical machining center with:

    • 3 machining axes (X, Y, Z)
    • 1 digital spindle without direct spindle encoder
    • 35 digital PLC input signals and 22 digital PLC output signals

    Designation

    Quantity

    Article No.

    SINUMERIK CNC

    SINUMERIK 808D ADVANCED M PPU 161.3 horizontal, English layout

    1

    6FC5370-2AM03-0AA0

    SINUMERIK 808D MCP machine control panel, English layout

    1

    6FC5303-0AF35-0AA0

    Actuating element, 22 mm, latching mushroom pushbutton, red

    1

    3SB3000-1HA20

    Contact block with 2 contact elements, 1 NO + 1 NC, 2-pole, screw terminal

    1

    3SB3400-0A

    Electronic handwheel, with front plate 120 mm × 120 mm, with setting wheel, 5 V DC, RS 422

    1

    6FC9320-5DB01

    Terminal strip converter 50-pole

    1

    6EP5406-5AA00

    Cable set, 50-pin ribbon cable, with insulation displacement connectors, 50-pin

    1

    6EP5306-5BG00

    Stabilized power supply, SITOP smart 5 A, 24 V DC, 1-phase

    1

    6EP1333-3BA00

    Pre-assembled bus cable PPU 161.3 – SINAMICS V70, length 5 m

    1

    6FC5548-0BA20-1AF0

    Pre-assembled bus cable SINAMICS V70 – SINAMICS V70, length 0.25 m

    3

    6FC5548-0BA20-1AA2

    Pre-assembled signal cable PPU 161.3 – handwheel, length 1 m

    1

    6FX8002-2BB01-1AB0

    Pre-assembled signal cable PPU 161.3 – incremental encoder for spindle (TTL), length 7 m

    1

    6FX8002-2CD01-1AH0

    SINAMICS V70

    SINAMICS V70, Irated 4.2 A

    2

    6SL3210-5DE16-0UA0

    SINAMICS V70, Irated 7.4 A

    1

    6SL3210-5DE21-0UA0

    SINAMICS V70 spindle1), Irated 19.6 A

    1

    6SL3210-5DE22-0UA0

    Pre-assembled signal cable SINAMICS V70 – incremental encoder in SIMOTICS S-1FL6 feed motor, length 10 m

    3

    6FX3002-2CT10-1BA0

    Pre-assembled power cable 4 × 2.5 mm2
    SINAMICS V70 – SIMOTICS S-1FL6 feed motor, length 10 m (32.81 ft)

    3

    6FX3002-5CL11-1BA0

    Pre-assembled signal cable SINAMICS V70 – brake in SIMOTICS S-1FL6 feed motor, length 10 m

    1

    6FX3002-5BL02-1BA0

    Pre-assembled signal cable SINAMICS V70 – incremental encoder for spindle, length 10 m

    1

    6FX3002-2CT30-1BA0

    Power cable 4 × 4 mm2, sold by the meter, (optional)2) SINAMICS V70 – SIMOTICS M-1PH1 main motor, length 30 m

    1

    6FX5008-1BB31-1DA0

    SIMOTICS motors

    SIMOTICS S-1FL6 feed motor, 8 Nm, 2000 rpm, incremental encoder, plain shaft, without holding brake

    2

    1FL6064-1AC61-0AG1

    SIMOTICS S-1FL6 feed motor, 15 Nm, 2000 rpm, incremental encoder, plain shaft, with holding brake

    1

    1FL6067-1AC61-0AH1

    SIMOTICS M-1PH1 spindle motor, 48 Nm, 1500 rpm, incremental encoder, plain shaft

    1

    1PH1105-1LF12-0GA0



    1) For braking resistor selection, please refer to page 4/19

    2) The 30 m power cables (raw cables) listed above could be selected for use with 1PH1 motors. You must assemble the power cable with connectors by yourself. You could also select the third party power cable by yourselves according to the system configuration.