Товаров
  
корзина пуста
  • Каталог оборудования Siemens
Системные решения и продукты для отраслей
›
Производственные машины
›
Компоненты автоматизации для станков
›
SINUMERIK 808 with SINAMICS V60/V70
›
SINUMERIK 808D ADVANCED system
›
Example package for Turning with SINUMERIK 808D ADVANCED T

Example package for Turning with SINUMERIK 808D ADVANCED T

  • Информационные материалы

    Информационные материалы

    The following composition of an equipment package is an example of an inclined-bed lathe with:

    • 2 machining axes (X, Z)
    • 1 digital spindle with direct spindle encoder
    • 24 digital PLC input signals and 16 digital PLC output signals

    Designation

    Quantity

    Article No.

    SINUMERIK CNC

    SINUMERIK 808D ADVANCED T PPU 160.3 vertical, English layout

    1

    6FC5370-2BT03-0AA0

    Machine control panel SINUMERIK 808D MCP vertical, with handwheel slot, English layout

    1

    6FC5303-0AF35-3AA0

    Actuating element, 22 mm, latching mushroom pushbutton, red

    1

    3SB3000-1HA20

    Contact block with 2 contacts, 1 NO + 1 NC, 2-pole, screw terminal

    1

    3SB3400-0A

    Electronic handwheel, with front panel 120 mm × 120 mm, with setting wheel, 5 V DC, RS422

    1

    6FC9320-5DB01

    Stabilized power supply, SITOP 5 A, 24 V DC, 1-phase

    1

    6EP1333-3BA00

    RS422 incremental encoder (TTL), 1024 S/R

    1

    6FX2001-2EB02

    Spring disk coupling, shaft diameter 6 mm/6 mm

    1

    6FX2001-7KF10

    Clamp for encoders with Synchro flange

    3

    6FX2001-7KP01

    Pre-assembled bus cable PPU 160.3 – SINAMICS V70, length 5 m

    1

    6FC5548-0BA20-1AF0

    Pre-assembled bus cable SINAMICS V70 – SINAMICS V70, length 0.25 m

    2

    6FC5548-0BA20-1AA2

    Pre-assembled signal cable PPU 160.3 – handwheel, length 1 m

    1

    6FX8002-2BB01-1AB0

    Pre-assembled signal cable PPU 160.3 – incremental spindle encoder (TTL), length 5 m

    1

    6FX8002-2CD01-1AF0

    SINAMICS V70

    SINAMICS V70, Irated 3.0 A

    1

    6SL3210-5DE13-5UA0

    SINAMICS V70, Irated 5.3 A

    1

    6SL3210-5DE17-8UA0

    SINAMICS V70 spindle1), Irated 19.6 A

    1

    6SL3210-5DE22-0UA0

    Pre-assembled signal cable SINAMICS V70 – absolute encoder in SIMOTICS S-1FL6 feed motor, length 5 m

    2

    6FX3002-2DB10-1AF0

    Pre-assembled power cable 4 × 1.5 mm2
    SINAMICS V70 – SIMOTICS S-1FL6 feed motor, length 5 m

    2

    6FX3002-5CL01-1AF0

    Pre-assembled power cable 4 × 2.5 mm2
    SINAMICS V70 – SIMOTICS S-1FL6 feed motor, length 5 m

    1

    6FX3002-5CL11-1AF0

    Pre-assembled brake cable SINAMICS V70 – SIMOTICS S-1FL6 feed motor with holding brake, length 5 m

    1

    6FX3002-5BL02-1AF0

    Pre-assembled signal cable SINAMICS V70 – incremental encoder for spindle, length 5 m

    1

    6FX3002-2CT30-1AF0

    Power cable 4 × 4 mm2, sold by the meter, (optional)2) SINAMICS V70 – SIMOTICS M-1PH1 main motor, length 30 m

    1

    6FX5008-1BB31-1DA0

    SIMOTICS motors

    SIMOTICS S-1FL6 feed motor, 4 Nm, 2000 rpm, absolute encoder, plain shaft, without holding brake

    1

    1FL6061-1AC61-0LG1

    SIMOTICS S-1FL6 feed motor, 11 Nm, 2000 rpm, absolute encoder, plain shaft, with holding brake

    1

    1FL6066-1AC61-0LH1

    SIMOTICS M-1PH1 spindle motor, 53 Nm, 1000 rpm, incremental encoder, plain shaft

    1

    1PH1105-1LD10-0GA0



    1) For braking resistor selection, please refer to page 4/19.

    2) The 30 m power cables (raw cables) listed above could be selected for use with 1PH1 motors. You must assemble the power cable with connectors by yourself. You could also select the third party power cable by yourselves according to the system configuration.