Sensor

Заказные данные
(1)
Аксессуары
(2)

The SIPLUS CMS1000 Sensor reliably records the vibration acceleration of rolling-contact bearings and converts this into an analog, differential voltage signal.

Advantages:

Industry-standard design
Sensor on the basis of MEMS technology (Micro Electro-Mechanical Systems)
Fast and easy installation (e.g. on fans, pumps and motors)
High IP67 degree of protection

Дизайн

The SIPLUS CSM1000 Sensor is designed with ground insulation. It consists of an M12 sensor cable and an M6 thread for adapting to the machine chassis.

Функции

The SIPLUS CMS1000 Sensor reliably records the vibration acceleration of rolling-contact bearings and converts this into an analog, differential voltage signal.

Чертеж

Sensor 6AT8001‑1AA00‑1XA0

Технические данные

SIPLUS CMS1000 Sensor
Interfaces
Power supply
DC input voltage	5 V
Typ. power loss at 5 V DC	20 mW
Sensor connection
Measuring range	±5 V
Frequency range (linear)	0 Hz ... 6.5 kHz
Typ. sensitivity	312 mV/g
Connection	4-pin M12 socket
Constructional design
Length (l)	64 mm
Diameter (Ø)	22 mm (SW22; SW: width across flats)
Material	Stainless steel
Weight	100 g
Environmental conditions
Storage/transport temperature	-40 ... +120 °C
Ambient temperature	-40 ... +120 °C
Relative humidity during operation	5 ... 95 %, condensation permissible
Safety regulations	IEC 61010-1
Electromagnetic compatibility	IEC 61326-1
Degree of protection	IP67
Cables
CABLE-MEMS; 4 x 0.34 mm² PUR shielded cable, M12, open end 4 m long 10 m long 30 m long	6AT8001-1AA00-1AA4 6AT8001-1AA00-1AB1 6AT8001-1AA00-1AB3
Accessories (optional)
Adapters	M6/M6 or M6/M8 M6/SPM
Approvals
CE	EMC Directive 2004/108/EC Low-voltage directive 2006/95/EC

Дальнейшая информация

For further product details, refer to the "SIPLUS CMS1000" Operating Instructions underhttp://support.automation.siemens.com/WW/view/de/42469516.