Bearing guard

• Заказные данные
  (1)
• Информационные материалы

  Дизайн

  The Bearing Guard consists of four terminal blocks A, B, C and D, a display, and associated control elements. The terminal blocks are coded and therefore constitute non-interchangeable connection elements.

  Функции

  The Bearing Guard reliably analyzes the status of machines and rolling-contact bearings and signals limit violations via floating contacts.

  Functions:

  • Low-cost monitoring of rolling-contact bearings
  • Diagnostics procedure in accordance with VDI 3832 and DIN ISO 10816‑3
  • Monitoring of motors with fixed speed
  • Easy commissioning by means of teach-in (learning mode) via LC display
  • Adjustable limits for warning and alarm
  • Limit signaling via two floating contacts

  Технические данные

  Order number		6AT8001-1AA00
  		SIPLUS CMS1000 Bearing Guard
  General information
  Product brand name		SIPLUS
  Product designation		SIPLUS CMS1000 Bearing Guard
  Product description		Device for monitoring mechanical vibrations based on characteristic values
  Installation type/mounting
  Mounting type		standard rail
  Mounting position		vertical
  Recommended mounting position		vertical
  Required clearance
  ● for side-by-side mounting at the top		25 mm
  ● for side-by-side mounting at the front		80 mm
  ● for side-by-side mounting at the side		0 mm
  ● for side-by-side mounting at the bottom		25 mm
  Supply voltage
  Type of supply voltage		AC/DC
  Rated value (DC)		24 V
  Permissible range, lower limit (50 Hz AC)		115 V
  Permissible range, upper limit (50 Hz AC)		240 V
  Permissible range, lower limit (60 Hz AC)		240 V
  Permissible range, upper limit (60 Hz AC)		115 V
  Input current
  Current consumption (at 24 V DC), typ.		210 mA
  Digital inputs
  Number of disable inputs		1
  Input voltage
  ● At the 24 V DC disable input		Yes
  Digital outputs
  Number of signaling outputs		2
  Design of signaling outputs		Relay output
  Speed input
  Number of speed inputs		1
  Protocols
  ● 24 V DC digital		Yes
  ● -10 V to +10 V		Yes
  Protocols
  ● 0 to 20 mA		No
  ● 4 mA to 20 mA		Yes
  Sensor input
  Number of IEPE sensor inputs		0
  Number of MEMS sensor inputs		1
  Protocols
  Bus communication		No
  Integrated Functions
  Monitoring functions
  ● Vibration characteristic monitoring via RMS value of the vibration speed		Yes
  ● Vibration characteristic monitoring via diagnostic characteristic value		Yes
  ● Frequency-selective monitoring via vibration speed spectrum		No
  ● Frequency-selective monitoring via vibration acceleration spectrum		No
  ● Frequency-selective monitoring via envelope curve analysis		No
  Degree and class of protection
  IP degree of protection		IP20
  Standards, approvals, certificates
  Certificate of suitability		CE
  Standard for interference immunity		IEC 61326-1, IEC 61326-2-3
  Standard for safety		IEC 61010-1
  Equipment marking according to EN 61346-2		P
  Equipment marking according to DIN 40719, expanded according to IEC 204-2, according to IEC 750		P
  Ambient conditions
  Ambient temperature during operation
  ● min.		-25 °C
  ● max.		60 °C
  Ambient temperature during storage/transportation
  ● Storage, min.		-25 °C
  ● Storage, max.		60 °C
  ● Transportation, min.		-25 °C
  ● Transportation, max.		60 °C
  Relative humidity
  ● Operation without condensation, min.		5 %
  ● Operation without condensation, max.		95 %
  Connection method
  Design of electrical connection for auxiliary and control circuit		Screw connection
  ● Connectable conductor cross-section, solid or stranded, min.		0.5 mm²
  ● Connectable conductor cross-section, solid or stranded, max.		4 mm²
  ● Connectable conductor cross-section, finely stranded with end sleeve, min.		0.5 mm²
  ● Connectable conductor cross-section, finely stranded with end sleeve, max.		2.5 mm²
  ● Connectable cable cross-section finely stranded without end sleeve, min.		0.5 mm²
  ● Connectable cable cross-section finely stranded without end sleeve, max.		2.5 mm²
  Terminals
  ● Removable terminal for main circuit		Yes
  ● Removable terminal for auxiliary and control circuit		Yes
  Connection I/O signals
  Mounting
  — Size of screwdriver bit		Size 2 and Pozidriv 2
  — Design of thread of connection screw		M3
  — Tightening torque, min.		0.8 N·m
  — Tightening torque, max.		1.2 N·m
  Mechanics/material
  Material of housing		plastic
  Dimensions
  Width		45 mm
  Height		106 mm
  Depth		86 mm
  Weights
  Weight		300 g