SIPLUS S7-400 IM 460-0

• Заказные данные
  (1)
• Аксессуары
  (3)
• Информационные материалы

  Информационные материалы

  • Send interface module for centralized expansion up to 5 m
  • Transfer from P and K Bus
  • Plug into central controller
  • You may connect up to 8 expansion units (max. 4 per port)
  • Usable exclusively with IM 461-0

  Note:

  SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme specific information was added.

  Technical documentation on SIPLUS can be found here:
  http://www.siemens.de/siplus-extreme

  Область применения

  The IM 460-0 interface module is intended for use as a send IM for central connection over short distances of up to 5 m. It transfers data from both the P-bus and the C-bus to the expansion racks.

  The IM 460-0 is intended for use only in association with the IM 461-0 interface module (in the expansion racks).

  Дизайн

  The IM 460-0 interface module can be inserted into the following central controllers:

  • UR1,
  • UR2 and
  • CR2.

  Up to 8 expansion units can be connected (up to 4 per interface). Up to 6 IM 460-0 units can be plugged in per central controller.

  The module has:

  • 3 LEDs for indicating faults.
  • 2 interfaces for connecting the expansion lines via 468-1 connecting cable.

  Технические данные

  Order number		6AG1460-0AA01-2AB0
  		SIPLUS_IM460-0_TX
  Input current
  from backplane bus 5 V DC, max.		140 mA
  Hardware configuration
  Cable length between first and last interface module, max.		5 m
  Ambient conditions
  Ambient temperature during operation
  ● min.		-25 °C; = Tmin
  ● max.		60 °C; = Tmax
  Extended ambient conditions
  ● relative to ambient temperature-atmospheric pressure-installation altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
  Relative humidity
  — With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
  Resistance
  — against biologically active substances / conformity with EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
  — against chemically active substances / conformity with EN 60721-3-3		Yes; Class 3C4 incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
  — against mechanically active substances / conformity with EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
  Dimensions
  Width		25 mm
  Height		290 mm
  Depth		217 mm
  Weights
  Weight, approx.		600 g