SIPLUS S7-400 interface modules

• Заказные данные
  (1)
• Информационные материалы

  Информационные материалы

  • To connect distributed I/O via PROFIBUS DP
  • Max. transmission rate 12 Mbit/s
  • Electrically isolated RS-485 interface
  • Connection via 9-pin Sub-D socket
  • One or two PROFIBUS modules can be plugged in for each S7-400 CPU:
    
    • CPU 414-3/416-3: 1 module
    • CPU 417-4: 2 modules
      

  Notes:

  Can only be used with the CPUs 6AG1 416-3XR05-4AB0, 6AG1 416-3ER05-4AB0 and 6AG1 417-4XT05-4AB0.

  SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.

  Technical documentation on SIPLUS can be found here:
  http://www.siemens.de/siplus-extreme

  Технические данные

  Order number		6AG1964-2AA04-7AB0
  		SIPLUS S7-400 IF964-DP
  Input current
  from CPU, max.		150 mA; Current consumption from S7-400 bus: The module uses no current at 24 V, it provides this voltage only at the DP interface. Total current consumption of the components connected to the DP interface, but maximum 150 mA. Current carrying capacity of the isolated 5 V (P5ext) maximum 90 mA, current carrying capacity of the 24 V maximum 150 mA.
  Power loss
  Power loss, typ.		1 W
  Interfaces
  PROFIBUS DP
  Cable length
  — Cable length, max.		1 200 m; At 9.6 kbit/s: max. 1200 m; at 12 Mbit/s: max. 100 m
  1. Interface
  Physics		RS 485
  Isolated		Yes
  Functionality
  ● PROFIBUS DP master		Yes; Default setting
  ● PROFIBUS DP slave		Yes
  DP master
  ● Transmission rate, max.		12 Mbit/s
  ● Number of DP slaves, max.		125; depending on the CPU used
  Services
  — PG/OP communication		Yes
  — Equidistance		Yes
  — SYNC/FREEZE		Yes
  — Direct data exchange (slave-to-slave communication)		Yes
  Address area
  — Inputs, max.		device-dependent
  — Outputs, max.		device-dependent
  User data per DP slave
  — Inputs, max.		244 byte
  — Outputs, max.		244 byte
  Communication functions
  Number of connections
  ● overall		device-dependent
  Ambient conditions
  Ambient temperature during operation
  ● min.		-25 °C; = Tmin
  ● max.		70 °C; = Tmax; @ 60°C for UL/ATEX/FM use
  Extended ambient conditions
  ● relative to ambient temperature-atmospheric pressure-installation altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
  Relative humidity
  — With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions)
  Resistance
  — against biologically active substances / conformity with EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
  — against chemically active substances / conformity with EN 60721-3-3		Yes; Class 3C4 incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
  — against mechanically active substances / conformity with EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
  Dimensions
  Width		26 mm
  Height		54 mm
  Depth		130 mm
  Weights
  Weight, approx.		65 g