SIPLUS S7-400 CPU 417

Заказные данные
(1)
Аксессуары
(16)

The most powerful SIMATIC S7-400 CPU

Applicable for plants with maximum requirements in the high-end performance range
With 2 plug-in slots for IF modules

Note:

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme specific information was added.

Technical documentation on SIPLUS can be found here:
http://www.siemens.de/siplus-extreme

Область применения

The CPU 417-4 is the most powerful SIMATIC S7-400 CPU. The integral PROFIBUS DP interfaces permit direct connection to the PROFIBUS DP fieldbus as master or slave.

Two further DP master systems can be connected via the IF 964-DP interface submodules.

Note:
Only the interface module 6ES7 964-2AA04-0AB0 can be used.

Дизайн

The CPU 417-4 has:

Powerful processor:
The CPU achieves instruction execution times as low as 0.018 µs per binary instruction.
30 MB RAM (of which 15 MB each for program and data);
fast RAM for parts of the user program relevant to execution.
Flexible expansion:
Up to 262144 digital and 16384 analog inputs/outputs.
Multi-point interface MPI:
With the MPI it is possible to establish simple networking of max. 32 stations at a data transmission rate of up to 12 Mbit/s. The CPU can establish up to 44 connections to stations of the communications bus (C bus) and the MPI.
Note:
If the PROFIBUS DP interface and MPI interface are operated simultaneously, it is only possible to connect the following bus connector to the MPI interface:
- With socket: 6ES7 972-0BB42-0XA0
- Without socket: 6ES7 972-0BA42-0XA0
Mode selector switch:
Designed as toggle switch.
Diagnostics buffer:
The last 120 fault and interrupt events are retained in a ring buffer for diagnostic purposes (extendable).
Real-time clock:
The date and time are appended to diagnostic messages of the CPU.
Memory card:
For expansion of the integrated load memory. The information in the load memory comprises S7-400 parameterization data in addition to the program and therefore requires twice as much memory space. The result is that:
- The integral load memory is not sufficient for large programs, therefore a memory card is frequently required.
  RAM and FEPROM cards (FEPROM for retentive storage) are available
PROFIBUS DP interface:
The PROFIBUS DP master interface allows a distributed automation configuration offering high speed and ease of use. From the user's point of view, the distributed I/O is treated as central I/O (same configuring, addressing, and programming).
Mixed configuration: SIMATIC S5 with SIMATIC S7 as PROFIBUS master to EN 50170.
Note:
If the PROFIBUS DP and MPI interface are operated simultaneously, it is only possible to connect the following bus connectors to the MPI interface:
- With socket: 6ES7 972-0BB42-0XA0
- Without socket: 6ES7 972-0BA42-0XA0
Two additional slots:
Two additional PROFIBUS DP master systems can be connected via IF 964-DP interface modules.

Функции

Block protection:
a password concept also protects the user program from unauthorized access
Integrated HMI services:
The user only has to specify the source and destination of the data with HMI devices. The data are then transported cyclically and automatically by the system.
Integrated communication functions:
- PG/OP communication
- Global data communication
- S7 standard communication
- S7 communication

Configurable Attributes

The STEP 7 tool "Hardware configuration" can be used to program the properties and response of the S7-400 including the CPUs, e.g.

Multipoint interface MPI:
- Definition of node addresses
- Startup/cycle behavior
- Stipulation of the maximum cycle time and communication load
Address allocation:
Addressing of I/O modules
Retentive area:
Definition of the number of retentive bit memories, counters, timers, data blocks, and clock memories
Size of the process image, local data
Length of the diagnostics buffer
Protection level:
Definition of access authorizations to program and data
System diagnostics:
Definition of the handling and scope of diagnostics messages
Timed interrupts:
Setting of periods
Configuring

Reporting functions

Status and fault indicators:
LEDs indicate internal and external faults and operating modes such RUN, STOP, restart, test function, etc.
Test functions:
The PG can be used to display signal states in program execution, modify process tags irrespective of the user program, read out the contents of stack memories, run separate program steps and inhibit program components.
Information functions:
The PG can be used to provide the user with information about the memory capacity and operating mode of the CPU, and the current utilization of the working and load memories.

Технические данные

Order number		6AG1417-4XT07-7AB0
		SIPLUS S7-400 CPU 417-4 V7
General information
Product type designation		CPU 417-4
Engineering with
● Programming package		STEP 7 V5.4 or higher with HSP 261
Supply voltage
Rated value (DC)
● 24 V DC		No; Power supply via system power supply
Power loss
Power loss, typ.		6.5 W
Memory
Work memory
● integrated		32 Mbyte
● integrated (for program)		16 Mbyte
● integrated (for data)		16 Mbyte
Load memory
● expandable FEPROM, max.		64 Mbyte
● integrated RAM, max.		1 Mbyte
● expandable RAM, max.		64 Mbyte
CPU processing times
for bit operations, typ.		7.5 ns
for word operations, typ.		7.5 ns
for fixed point arithmetic, typ.		7.5 ns
for floating point arithmetic, typ.		15 ns
Counters, timers and their retentivity
S7 counter
● Number		2 048
IEC counter
● present		Yes
S7 times
● Number		2 048
IEC timer
● present		Yes
Data areas and their retentivity
Flag
● Number, max.		16 kbyte; Size of bit memory address area
Address area
I/O address area
● Inputs		16 kbyte
● Outputs		16 kbyte
Process image
● Inputs, adjustable		16 kbyte
● Outputs, adjustable		16 kbyte
Time of day
Clock
● Hardware clock (real-time)		Yes
Operating hours counter
● Number		16
Interfaces
Interfaces/bus type		1 x MPI/PROFIBUS DP, 1 x PROFIBUS DP, 2 x PROFIBUS DP (optionally pluggable)
Number of RS 485 interfaces		2; Combined MPI / PROFIBUS DP and PROFIBUS DP
Number of other interfaces		2; PROFIBUS DP with IF 964-DP (plug-in option; MLFB: 6ES7964-2AA04-0AB0)
1. Interface
Interface type		Integrated
Physics		RS 485 / PROFIBUS + MPI
Functionality
● MPI		Yes
● PROFIBUS DP master		Yes
● PROFIBUS DP slave		Yes
DP master
● Number of DP slaves, max.		32
2. Interface
Interface type		Integrated
Physics		RS 485 / PROFIBUS
Functionality
● PROFIBUS DP master		Yes
● PROFIBUS DP slave		Yes
DP master
● Number of DP slaves, max.		125
3. Interface
Interface type		Pluggable interface module (IF), technical data as for 2nd interface
Plug-in interface modules		IF 964-DP (MLFB: 6ES7964-2AA04-0AB0)
Physics		RS 485 / PROFIBUS
Functionality
● MPI		No
● PROFIBUS DP master		Yes
● PROFIBUS DP slave		Yes
DP master
● Number of DP slaves, max.		125
4. Interface
Interface type		Pluggable interface module (IF), technical data as for 2nd interface
Plug-in interface modules		IF 964-DP (MLFB: 6ES7964-2AA04-0AB0)
Isochronous mode
Isochronous operation (application synchronized up to terminal)		Yes; For PROFIBUS only
Communication functions
PG/OP communication		Yes
Data record routing		Yes
Global data communication
● supported		Yes
S7 basic communication
● supported		Yes
S7 communication
● supported		Yes
S5 compatible communication
● supported		Yes; Via FC AG_SEND and AG_RECV, max. via 10 CP 443-1 or 443-5
Standard communication (FMS)
● supported		Yes; Via CP and loadable FB
Open IE communication
● ISO-on-TCP (RFC1006)		Via CP 443-1 and loadable FB
Web server
● supported		No
Number of connections
● overall		120
Ambient conditions
Ambient temperature during operation
● min.		-25 °C; = Tmin
● max.		70 °C; = Tmax
Extended ambient conditions
● relative to ambient temperature-atmospheric pressure-installation altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation
Resistance
— against biologically active substances / conformity with EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3		Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Configuration
Know-how protection
● User program protection/password protection		Yes
● Block encryption		Yes; With S7 block Privacy
Dimensions
Width		50 mm
Height		290 mm
Depth		219 mm
Weights
Weight, approx.		900 g