SIPLUS S7-1500 CPU 1516-3 PN/DP TX RAIL

• Заказные данные
  (1)
• Аксессуары
  (6)
• Информационные материалы

  Информационные материалы

  • The CPU with large program and data memory in the SIPLUS extreme RAIL S7-1500 controller product range for applications with high program scope requirements.
  • Approved in accordance with the railway standards EN 50155, EN 15121, EN 50124, EN 50125 and EN 45545 for use in rail traffic
  • High processing speed for binary and floating-point arithmetic
  • PROFINET IO IRT interface with 2-port switch
  • Additional PROFINET interface with separate IP address
  • PROFINET IO Controller for operating distributed I/O on PROFINET
  • PROFINET I-Device for connecting the CPU as an intelligent PROFINET device under a SIMATIC or non-Siemens PROFINET IO Controller
  • PROFIBUS DP master interface
  • Isochronous mode on PROFIBUS and PROFINET
  • SIMATIC memory card required for operation of the CPU

  Область применения

  The SIPLUS S7-1500 CPU 1516-3 PN/DP TX RAIL is the railway controller CPU with a large program and data memory for demanding tasks in applications that also contain distributed automation structures alongside central I/O.

  It can be used as a PROFINET IO Controller or as distributed intelligence (PROFINET I-Device). The integrated PROFINET IO IRT interface is designed as a 2-port switch so that a linear topology can be set up.

  The additional integrated PROFINET interface with separate IP address can be used, for example, for network separation.

  Distributed I/O can be connected via PROFIBUS via the integrated PROFIBUS interface.

  In addition, the CPU offers comprehensive control functionalities as well as the ability to connect drives via standardized PLC-open blocks.

  Дизайн

  The SIPLUS S7-1500 CPU 1516-3 PN/DP TX RAIL has:

  • A powerful processor:
    The CPU achieves command execution times as low as 10 ns per binary instruction.
  • A large work memory:
    1 MB for program, 5 MB for data
  • SIMATIC Memory Cards as load memory;
    permit additional functions such as datalog and archives
  • Flexible expansion capability:
    single-tier configuration with max. 32 modules (CPU + 31 modules)
  • PROFINET IO IRT interface for connecting distributed I/O via PROFINET
  • PROFINET interface for network separation
  • PROFIBUS DP interface for connecting distributed I/O via PROFIBUS

  Функции

  • Performance
    • Faster command processing, depending on the CPU type, language extensions and new data types
    • Even shorter response times of the CPUs due to considerably faster backplane bus
    • Powerful network connection:
      PROFINET IO IRT (2-port switch) as standard interface. Additional PROFINET interface integrated, e.g. for network separation.
  • Integrated technology
    • Connection of analog and PROFIdrive-capable drives via standardized blocks (PLCopen)
    • Support of speed-controlled and positioning axes as well as external encoders, positionally precise gearing between axes.
    • Trace functions for all CPU tags, both for diagnostics in real time as well as for sporadic error detection
    • Comprehensive control functionalities, e.g. easily configurable blocks for automatic optimization of the control parameters for optimum control quality
  • Security Integrated
    • Password-based know-how protection against unauthorized read-out and modification of program blocks
    • Copy protection for tying individual blocks to the serial number of the SIMATIC Memory Card: The block can only run if the configured memory card is inserted into the CPU.
    • 4-level authorization concept:
      Communication to the HMI devices can also be restricted.
    • Manipulation protection:
      The controller recognizes changed or unauthorized transmissions of the engineering data.
  • Integrated system diagnostics
    • System diagnostics information is displayed consistently and in plain text in the TIA Portal, HMI devices and Web server, even for messages from the drives, and is updated even if the CPU is in STOP mode.
    • Integrated into the firmware of the CPU, no special configuration is required
  • SIMATIC Memory Card (required for operation of the CPU)
    • Used as a plug-in load memory or for updating the firmware.
    • Also for storing additional documents or csv files (for recipes and archives)
    • Creation of data blocks for storage/reading of data via SFCs of the user program
  • Datalog (archives) and recipes
    • Storage of csv files for recipes and archives on the SIMATIC Memory Card;
      easy access to plant-relevant operating data using Office tools or via a Web server
    • Easy access to machine configuration data by means of a Web browser or SD card reader (two-way data exchange from and to the controller)
  • Programming
    • Programming with STEP 7 Professional

  Технические данные

  Order number		6AG2516-3AN01-4AB0
  		SIPLUS S7-1500 CPU 1516-3 PN/DP TX RAIL
  General information
  Product type designation		CPU 1516-3 PN/DP
  Supply voltage
  Type of supply voltage		24 V DC
  Power loss
  Power loss, typ.		7 W
  Memory
  Work memory
  ● integrated (for program)		1 Mbyte
  ● integrated (for data)		5 Mbyte
  Load memory
  ● Plug-in (SIMATIC Memory Card), max.		32 Gbyte
  CPU processing times
  for bit operations, typ.		10 ns
  for word operations, typ.		12 ns
  for fixed point arithmetic, typ.		16 ns
  for floating point arithmetic, typ.		64 ns
  Counters, timers and their retentivity
  S7 counter
  ● Number		2 048
  IEC counter
  ● Number		Any (only limited by the main memory)
  S7 times
  ● Number		2 048
  IEC timer
  ● Number		Any (only limited by the main memory)
  Data areas and their retentivity
  Flag
  ● Number, max.		16 kbyte
  Address area
  I/O address area
  ● Inputs		32 kbyte; All inputs are in the process image
  ● Outputs		32 kbyte; All outputs are in the process image
  Time of day
  Clock
  ● Type		Hardware clock
  1. Interface
  Interface types
  ● Number of ports		2
  ● integrated switch		Yes
  ● RJ 45 (Ethernet)		Yes; X1
  Functionality
  ● PROFINET IO Controller		Yes
  ● PROFINET IO Device		Yes
  ● SIMATIC communication		Yes
  ● Open IE communication		Yes
  ● Web server		Yes
  ● Media redundancy		Yes
  PROFINET IO Controller
  Services
  — PG/OP communication		Yes
  — S7 routing		Yes
  — Isochronous mode		Yes
  — Open IE communication		Yes
  — IRT		Yes
  — MRP		Yes; As MRP redundancy manager and/or MRP client; max. number of devices in the ring: 50
  — MRPD		Yes; Requirement: IRT
  — PROFIenergy		Yes
  — Prioritized startup		Yes; Max. 32 PROFINET devices
  — Number of connectable IO Devices, max.		256; In total, up to 1 000 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET
  — Of which IO devices with IRT, max.		64
  — Number of connectable IO Devices for RT, max.		256
  — of which in line, max.		256
  — Number of IO Devices that can be simultaneously activated/deactivated, max.		8; in total across all interfaces
  — Number of IO Devices per tool, max.		8
  — Updating times		The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data
  Update time for IRT
  — for send cycle of 250 µs		250 μs to 4 ms; Note: In the case of IRT with isochronous mode, the minimum update time of 500 µs of the isochronous OB is decisive
  — for send cycle of 500 µs		500 µs to 8 ms
  — for send cycle of 1 ms		1 ms to 16 ms
  — for send cycle of 2 ms		2 ms to 32 ms
  — for send cycle of 4 ms		4 ms to 64 ms
  — With IRT and parameterization of "odd" send cycles		Update time = set "odd" send clock (any multiple of 125 µs: 375 µs, 625 µs ... 3 875 µs)
  Update time for RT
  — for send cycle of 250 µs		250 µs to 128 ms
  — for send cycle of 500 µs		500 µs to 256 ms
  — for send cycle of 1 ms		1 ms to 512 ms
  — for send cycle of 2 ms		2 ms to 512 ms
  — for send cycle of 4 ms		4 ms to 512 ms
  PROFINET IO Device
  Services
  — PG/OP communication		Yes
  — S7 routing		Yes
  — Isochronous mode		No
  — Open IE communication		Yes
  — IRT		Yes
  — MRP		Yes
  — MRPD		Yes; Requirement: IRT
  — PROFIenergy		Yes
  — Shared device		Yes
  — Number of IO Controllers with shared device, max.		4
  2. Interface
  Interface types
  ● Number of ports		1
  ● integrated switch		No
  ● RJ 45 (Ethernet)		Yes; X2
  Functionality
  ● PROFINET IO Controller		Yes
  ● PROFINET IO Device		Yes
  ● SIMATIC communication		Yes
  ● Open IE communication		Yes
  ● Web server		Yes
  ● Media redundancy		No
  PROFINET IO Controller
  Services
  — PG/OP communication		Yes
  — S7 routing		Yes
  — Isochronous mode		No
  — Open IE communication		Yes
  — IRT		No
  — MRP		No
  — PROFIenergy		Yes
  — Prioritized startup		No
  — Number of connectable IO Devices, max.		32; In total, up to 1 000 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET
  — Number of connectable IO Devices for RT, max.		32
  — of which in line, max.		32
  — Number of IO Devices that can be simultaneously activated/deactivated, max.		8; in total across all interfaces
  — Number of IO Devices per tool, max.		8
  — Updating times		The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data
  Update time for RT
  — for send cycle of 1 ms		1 ms to 512 ms
  PROFINET IO Device
  Services
  — PG/OP communication		Yes
  — S7 routing		Yes
  — Isochronous mode		No
  — Open IE communication		Yes
  — IRT		No
  — MRP		No
  — MRPD		No
  — PROFIenergy		Yes
  — Prioritized startup		No
  — Shared device		Yes
  — Number of IO Controllers with shared device, max.		4
  3. Interface
  Interface types
  ● Number of ports		1
  ● RS 485		Yes
  Functionality
  ● PROFIBUS DP master		Yes
  ● PROFIBUS DP slave		No
  ● SIMATIC communication		Yes
  Protocols
  Supports protocol for PROFINET IO		Yes
  PROFIsafe		No
  PROFIBUS		Yes
  Number of connections
  ● Number of connections, max.		256; via integrated interfaces of the CPU and connected CPs / CMs
  PROFIBUS DP master
  Services
  — Number of DP slaves		125; In total, up to 1 000 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET
  Isochronous mode
  Isochronous operation (application synchronized up to terminal)		Yes; With minimum OB 6x cycle of 375 µs
  Supported technology objects
  Motion Control		Yes; Note: The number of axes affects the cycle time of the PLC program; selection guide via the TIA Selection Tool or SIZER
  Controller
  ● PID_Compact		Yes; Universal PID controller with integrated optimization
  ● PID_3Step		Yes; PID controller with integrated optimization for valves
  ● PID-Temp		Yes; PID controller with integrated optimization for temperature
  Counting and measuring
  ● High-speed counter		Yes
  Isolation
  Isolation tested with		707 V DC (type test) and according to EN 50155 (routine test)
  Standards, approvals, certificates
  Railway application
  ● EN 50121-3-2		Yes; EMC for rail vehicles
  ● EN 50121-4		Yes; EMC for signal and telecommunications systems
  ● EN 50124-1		Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.5 kV; UNm = 24 V DC
  ● EN 50125-1		Yes; Rail vehicles - see ambient conditions
  ● EN 50125-2		Yes; Stationary electrical equipment - see ambient conditions
  ● EN 50125-3		Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track)
  ● EN 50155		Yes; Rail vehicles - temperature class Tx, horizontal mounting position, salt spray Class ST2
  ● EN 61373		Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B
  ● Fire protection acc. to EN 45545-2		Yes; Rail vehicles - verification on request
  Ambient conditions
  Ambient temperature during operation
  ● horizontal installation, min.		-40 °C; = Tmin
  ● horizontal installation, max.		70 °C; = Tmax; +85 °C for 10 min (Tx acc. to EN 50155)
  Extended ambient conditions
  ● relative to ambient temperature-atmospheric pressure-installation altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
  Relative humidity
  — With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
  Resistance
  — against biologically active substances / conformity with EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
  — against biologically active substances/conformity with EN 60721-3-5		Yes; Class 5B2 mold and fungal spores (excluding fauna). The supplied plug covers must remain in place over the unused interfaces during operation!
  — against chemically active substances / conformity with EN 60721-3-3		Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
  — against chemically active substances/conformity with EN 60721-3-5		Yes; Class 5C3 (RH < 75%) including salt spray according to EN 50155 (ST2). The supplied plug covers must remain in place over the unused interfaces during operation!
  — against mechanically active substances / conformity with EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
  — against mechanically active substances/conformity with EN 60721-3-5		Yes; Class 5S3 including sand and dust. The supplied plug covers must remain in place over the unused interfaces during operation!
  Configuration
  Programming
  Programming language
  — LAD		Yes
  — FBD		Yes
  — STL		Yes
  — SCL		Yes
  — GRAPH		Yes
  Know-how protection
  ● User program protection/password protection		Yes
  ● Copy protection		Yes
  ● Block protection		Yes
  Access protection
  ● Protection level: Write protection		Yes
  ● Protection level: Read/write protection		Yes
  ● Protection level: Complete protection		Yes
  Dimensions
  Width		105 mm
  Height		147 mm
  Depth		129 mm
  Weights
  Weight, approx.		1 109 g
  Other
  Note:		For use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A Online Support article 109736776