SIDOOR - Automatic door control for machine tools

• Информационные материалы

  Информационные материалы

  Door control system is the general term for a controller of access systems.

  The SIDOOR product family is primarily intended for the operation of sliding doors. These doors can be operated both horizontally and vertically.

  Door control systems are characterized by the fact that there are always two defined states for the open and closed position of the door.

  The door is always checked, controlled and operated between these positions according to the guidelines of the respective application.

  In a defined learn run via 1-button operation, the door system independently determines the values for the door width, the dynamic door weight and the drive direction of the geared motor and stores these data in a non-volatile memory.

  Дизайн

  The machine tool door drive is comprised of a controller and a maintenance-free drive unit, the geared motors.

  Controllers are electronic controllers connected to the power supply via an external power supply unit (SIDOOR NT40, SIDOOR Transformer). They are generally connected to the higher-level controller via digital or fieldbus interfaces, and can be configured via a user interface.

  Various controllers for doors weighing up to 600 kg (1323 lb) are available for machine tool doors.

  Функции

  The safe functions - force limitation, energy limitation and end position detection - fulfill the requirements according to DIN EN ISO 13849-1:2008 for Category 2 and Performance Level d. The drives are suitable for power-operated guards according to EN 953:1997+A1:2009.

  The geared motors are the maintenance-free drive unit of the door drive. The geared motors are DC motors with non-self-locking gearing, and are speed-controlled. The set force and speed limits are not exceeded.

  Operation of the door drives listed here does not require a limit switch. The door width and the "OPEN/CLOSED" positions are determined automatically.

  Forces are transferred via a toothed belt. The toothed belt passes over a deflector pulley, and can be fitted with 2 clutch holders. This enables it to drive both single-sided and centrally-opening doors.

  Особенности

  • 1-button operation for the entire commissioning process
  • Optimum and stable drive characteristics
  • Reduced service requirements and costs
  • Small footprint thanks to compact design
  • Automated functions for enhanced safety

  Дальнейшая информация

  You can find additional information on the Internet at:

  http://www.siemens.com/sidoor