SlimLine Compact

• Заказные данные
  (24)
• Аксессуары
  (13)
• Информационные материалы

  Информационные материалы

  SlimLine Compact modules

  

  SlimLine Compact AS-Interface modules SC17.5 and S22.5 with screw-type terminals

  

  SlimLine Compact module SC22.5 with connector with screw terminals

  The AS‑Interface module series for the control cabinet SlimLine Compact with degree of protection IP20 creates space in the cabinet and in distributed local boxes. A width of just 17.5 mm or 22.5 mm ensures considerable space savings in the control cabinet.

  The SlimLine Compact module series comprises not only digital and analog I/O modules but also ASIsafe modules with safe inputs. Digital outputs are available as solid-state and relay outputs.

  Sensors and actuators as well as the AS‑Interface bus cable are connected by means of removable screw or push-in spring-type terminals. Device connectors available as accessories offer the possibility of looping through the AS‑Interface bus cable and the 24 V DC voltage supply U_aux from one module to additional modules. This significantly simplifies the wiring, as the bus cable and U_aux only have to be connected to one device AS‑Interface.

  All devices for the connection of 3-wire sensors offer the possibility of supplying the sensors either from the AS‑Interface bus cable or alternatively from the 24 V DC voltage supply U_aux depending on the requirements of the particular application. A slide switch is used to make the selection. If the supply via U_aux is selected, the wiring of the sensor terminals remains unchanged. This means that no external supply is necessary for the sensors.

  All modules have LEDs on the front that provide diagnostic information and indicate the status of the module inputs and outputs. An addressing socket integrated at the front enables the module to be addressed also when it is installed. Integrated adapters permit mounting onto a standard mounting rail – either directly for the module or for the device connector. Alternatively, the modules can also be screw-mounted using push-in lugs (accessories). These lugs for screw fastening must be ordered separately.

  More information
  For the Manual "AS-Interface SlimLine Compact Modules", see https://support.industry.siemens.com/cs/ww/en/view/109481489

  
  
  

  Дальнейшая информация

  

  SlimLine modules S45 (picture on left) and S22.5 module (picture on right) with spring-type terminals

  The existing SlimLine series of I/O modules for use in the control cabinet is being replaced by the new SlimLine Compact series. We recommend that these new devices are used in future.

  The code conversion table indicates the best options for replacing the existing SlimLine devices with SlimLine Compact devices.

  Note:

  The previous SlimLine devices are still available for use as replacements in existing systems. As a result of the innovation, the new SlimLine Compact devices are not fully compatible in terms of either mechanical dimensions or electrical properties.

  The code conversion table below links the existing SlimLine S22.5, S22.5F and S45 modules with the new SlimLine Compact SC17.5, SC17.5F and SC22.5 devices.

  Code conversion table

  SlimLine S22.5, S22.5F and S45			Comparison type SlimLine Compact SC17.5, SC17.5F and SC22.5
  Screw terminals	Spring-type terminals	Version	Screw terminals	Spring-type terminals	Version
  3RK1200-0CE00-0AA2	3RK1200-0CG00-0AA2	4DI, 2-wire, standard slave	3RK2200-0CE00-2AA2	3RK2200-0CG00-2AA2	4DI, 2-wire, A/B slave
  3RK2200-0CE02-0AA2	3RK2200-0CG02-0AA2	4DI, A/B slave	3RK2200-2CE00-2AA2	3RK2200-2CG00-2AA2	4DI, A/B slave
  3RK1200-0CE02-0AA2	3RK1200-0CG02-0AA2	4DI, standard slave
  3RK1400-0BE00-0AA2	3RK1400-0BG00-0AA2	2DI/2DQ, standard slave	3RK1400-2CE00-2AA2	3RK1400-2CG00-2AA2	4DI/4DQ, standard slave
  3RK1402-0BE00-0AA2	3RK1402-0BG00-0AA2	2DI/2DQ relay, standard slave	3RK2402-2ME00-2AA2	3RK2402-2MG00-2AA2	4DI/2DQ relay, A/B slave
  3RK1100-1CE00-0AA2	3RK1100-1CG00-0AA2	4DQ, standard slave	3RK2100-1CE00-2AA2	3RK2100-1CG00-2AA2	4DQ, A/B slave
  3RK2400-1CE01-0AA2	3RK2400-1CG01-0AA2	4DI/4DQ A/B slave	3RK2400-2CE00-2AA2	3RK2400-2CG00-2AA2	4DI/4DQ A/B slave
  3RK2400-1FE00-0AA2	3RK2400-1FG00-0AA2	4DI/3DQ A/B slave
  3RK1400-1CE00-0AA2	3RK1400-1CG00-0AA2	4DI/4DO, 1A semiconductor, standard slave	3RK1400-2CE00-2AA2	3RK1400-2CG00-2AA2	4DI/4DO, 2A semiconductor, standard slave
  3RK1400-1CE01-0AA2	3RK1400-1CG01-0AA2	4DI/4DO, 2A semiconductor, standard slave
  3RK1402-3CE01-0AA2	3RK1402-3CG01-0AA2	4DI/4DQ (sensor supply from Uaux), standard slave
  3RK1402-3CE00-0AA2	3RK1402-3CG00-0AA2	4DI/4DQ relay, standard slave	3RK2402-2CE00-2AA2	3RK2402-2CG00-2AA2	4DI/4DQ relay, A/B slave
  3RK1205-0BE00-0AA2	3RK1205-0BG00-0AA2	2F-DI	3RK1205-0BE00-2AA2	3RK1205-0BG00-2AA2	2F-DI
  3RK1405-0BE00-0AA2	3RK1405-0BG00-0AA2	2F-DI/2DQ (outputs supplied from UASI)	3RK1405-2BE00-2AA2	3RK1405-2BG00-2AA2	2F-DI/2DQ (supply UASI/Uaux can be switched over)
  3RK1405-1BE00-0AA2	3RK1405-1BG00-0AA2	2F-DI/2DQ (outputs supplied from Uaux)