1-phase, 24 V DC (SITOP PSU100P, IP67)

• Заказные данные
  (2)
• Аксессуары
  (2)
• Информационные материалы

  Информационные материалы

  The SITOP PSU100P 1-phase power supplies for wall mounting, with their rugged design and IP 67 degree of protection are ideal for distributed applications outside the control cabinet.

  Main product highlights

  • 24 V DC/ 5 A and 8 A
  • Automatic switchover of the input voltage
  • Temperature range from -25 °C to +60 °C without derating
  • High efficiency of 93 % for low internal power consumption
  • Isolated relay contact "24 V OK"
  • Operation display on the device by means of LED (green = "24 V OK", flashing red = overload)

  Технические данные

  Order number		6EP1333-7CA00	6EP1334-7CA00
  Product		SITOP PSU100P	SITOP PSU100P
  Power supply, type		24 V/5 A	24 V/8 A
  Input
  Input		1-phase AC	1-phase AC
  Supply voltage
  ● 1 at AC Rated value		120 V	120 V
  ● 2 at AC Rated value		230 V	230 V
  ● Note		Automatic range selection	Automatic range selection
  Input voltage
  ● 1 at AC		85 ... 132 V	85 ... 132 V
  ● 2 at AC		170 ... 264 V	170 ... 264 V
  Wide-range input		No	No
  Overvoltage resistance		Implemented internally with varistor	Implemented internally with varistor
  Mains buffering at Iout rated, min.		40 ms; at Vin = 120/230 V	40 ms; at Vin = 120/230 V
  Rated line frequency 1		50 Hz	50 Hz
  Rated line frequency 2		60 Hz	60 Hz
  Rated line range		47 ... 63 Hz	47 ... 63 Hz
  Input current
  ● at rated input voltage 120 V		2.25 A	3.5 A
  ● at rated input voltage 230 V		1.24 A	1.52 A
  Switch-on current limiting (+25 °C), max.		15 A	15 A
  I²t, max.		0.6 A²·s	0.6 A²·s
  Built-in incoming fuse		T 3.15 A	T 6.3 A
  Protection in the mains power input (IEC 898)		Recommended miniature circuit breaker: from 6 A characteristic C/B	Recommended miniature circuit breaker: from 6 A characteristic C/B
  Output
  Output		Controlled, isolated DC voltage	Controlled, isolated DC voltage
  Rated voltage Vout DC		24 V	24 V
  Total tolerance, static ±		3 %	3 %
  Static mains compensation, approx.		0.1 %	0.1 %
  Static load balancing, approx.		0.2 %	0.2 %
  Residual ripple peak-peak, max.		50 mV	50 mV
  Spikes peak-peak, max. (bandwidth: 20 MHz)		100 mV	100 mV
  Product function Output voltage adjustable		No	No
  Status display		Green LED: 24 V OK; red LED flashing: "overload/short-circuit"	Green LED: 24 V OK; red LED flashing: "overload/short-circuit"
  Signaling		Relay contact (NO contact, rating 30 V AC/ 0.5 A; 30 V DC/1 A) for 24 V OK	Relay contact (NO contact, rating 30 V AC/ 0.5 A; 30 V DC/1 A) for 24 V OK
  On/off behavior		Overshoot of Vout < 3 %	Overshoot of Vout < 3 %
  Startup delay, max.		1.5 s	1.5 s
  Voltage rise, typ.		22 ms	23 ms
  Voltage increase time of the output voltage maximum		100 ms	100 ms
  Rated current value Iout rated		5 A	8 A
  Current range		0 ... 5 A	0 ... 8 A
  Supplied active power typical		133 W	206 W
  Short-term overload current
  ● on short-circuiting during the start-up typical		20 A	30 A
  ● at short-circuit during operation typical		20 A	30 A
  Duration of overloading capability for excess current
  ● on short-circuiting during the start-up		50 ms	50 ms
  ● at short-circuit during operation		50 ms	50 ms
  Parallel switching for enhanced performance		Yes; Symmetric wiring required	Yes; Symmetric wiring required
  Numbers of parallel switchable units for enhanced performance		2	2
  Efficiency
  Efficiency at Vout rated, Iout rated, approx.		90 %	93.6 %
  Power loss at Vout rated, Iout rated, approx.		12.9 W	13.1 W
  Closed-loop control
  Dynamic mains compensation (Vin rated ±15 %), max.		0.2 %	0.2 %
  Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ.		1 %	1 %
  Setting time maximum		2 ms	2 ms
  Protection and monitoring
  Output overvoltage protection		< 29 V	< 29 V
  Current limitation, typ.		5.5 A	9 A
  Property of the output Short-circuit proof		Yes	Yes
  Short-circuit protection		Electronic shutdown, automatic restart	Electronic shutdown, automatic restart
  Enduring short circuit current RMS value
  ● maximum		6 A	9 A
  ● typical		5 A	8 A
  Overload/short-circuit indicator		Red LED flashing for "overload/short-circuit"	Red LED flashing for "overload/short-circuit"
  Safety
  Primary/secondary isolation		Yes	Yes
  Galvanic isolation		Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
  Protection class		Class I	Class I
  Leakage current
  ● maximum		3.5 mA	3.5 mA
  ● typical		1 mA	1 mA
  CE mark		Yes	Yes
  UL/cUL (CSA) approval		cULus-Listed (UL 508, CSA C22.2 No. 107.1)	cULus-Listed (UL 508, CSA C22.2 No. 107.1)
  Explosion protection		No	No
  FM approval		-	-
  CB approval		No	No
  Marine approval		No	No
  Degree of protection (EN 60529)		IP67, enclosure type 5 indoor	IP67, enclosure type 5 indoor
  EMC
  Emitted interference		EN 55022 Class B	EN 55022 Class B
  Supply harmonics limitation		EN 61000-3-2	EN 61000-3-2
  Noise immunity		EN 61000-6-2	EN 61000-6-2
  Operating data
  Ambient temperature
  ● during operation		-25 ... +60 °C	-25 ... +60 °C
  — Note		with natural convection	with natural convection
  ● during transport		-40 ... +85 °C	-40 ... +85 °C
  ● during storage		-40 ... +85 °C	-40 ... +85 °C
  Humidity class according to EN 60721		3K6 without direct sunlight	3K6 without direct sunlight
  Mechanics
  Connection technology		screw-type terminals	screw-type terminals
  Connections
  ● Supply input		L1, N, PE: Plug connector 7/8" (counterpart see "Operating Instructions (compact)")	L1, N, PE: Plug connector 7/8" (counterpart see "Operating Instructions (compact)")
  ● Output		+, -: Plug connector 7/8" (counterpart see "Operating Instructions (compact)")	+, -: Plug connector 7/8" (counterpart see "Operating Instructions (compact)")
  ● Auxiliary		Alarm signals: M12 plug-in connector 4-pin	Alarm signals: M12 plug-in connector 4-pin
  Product function
  ● removable terminal at input		Yes	Yes
  ● removable terminal at output		Yes	Yes
  Width of the enclosure		120 mm	120 mm
  Height of the enclosure		181 mm	181 mm
  Depth of the enclosure		60.5 mm	60.5 mm
  Required spacing
  ● top		50 mm	50 mm
  ● bottom		0 mm	0 mm
  ● left		0 mm	0 mm
  ● right		0 mm	0 mm
  Weight, approx.		1.1 kg	1.3 kg
  Product feature of the enclosure housing for side-by-side mounting		Yes	Yes
  Installation		Wall mounting	Wall mounting
  MTBF at 40 °C		1 500 000 h	800 000 h
  Other information		Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

  
  

  Дальнейшая информация

  Select the appropriate power supply quickly and easily with the SITOP Selection Tool:

  http://www.siemens.com/sitop-selection-tool