1-phase, 12 V DC

• Заказные данные
  (2)
• Аксессуары
  (1)
• Информационные материалы

  Информационные материалы

  The single-phase SITOP compact are power supplies for the lower performance range. Thanks to the extremely space-saving slim design, they are especially suited to distributed applications in control boxes or in small control cabinets. The series is characterized by low power losses throughout the entire load range. The losses are extremely low even during idling, which means they are perfectly suited for applications that are frequently in stand-by mode. The SITOP PSU100C power supplies have a wide-range input for AC and DC networks; plug-in terminals facilitate the electrical connection.

  Main product highlights

  • 12 V DC, 2 A and 6.5 A
  • 1-phase wide-range input from 85 V to 264 V AC or 110 V to 300 V DC
  • Small mounting surface thanks to its slim design
  • High efficiency across the entire load range.
  • Low energy consumption during no-load operation or stand-by
  • Adjustable output voltage for compensating voltage drops
  • Green LED for "12 V OK"
  • Plug-in connecting terminals for pre-fabricated wiring and fast electrical connection
  • Wide temperature range from –20 to +70 °C
  • Comprehensive certifications, such as UL, ATEX or GL

  Технические данные

  Order number		6EP1321-5BA00	6EP1322-5BA10
  Product		SITOP PSU100C	SITOP PSU100C
  Power supply, type		12 V/2 A	12 V/6.5 A
  Input
  Input		1-phase AC or DC	1-phase AC or DC
  Rated voltage value Vin rated		100 ... 230 V	100 ... 230 V
  Voltage range AC		85 ... 264 V	85 ... 264 V
  Input voltage
  ● at DC		110 ... 300 V	110 ... 300 V
  Wide-range input		Yes	Yes
  Overvoltage resistance		2.3 × Vin rated, 1.3 ms	2.3 × Vin rated, 1.3 ms
  Mains buffering at Iout rated, min.		20 ms; at Vin = 230 V	20 ms; at Vin = 230 V
  Rated line frequency 1		50 Hz	50 Hz
  Rated line frequency 2		60 Hz	60 Hz
  Rated line range		47 ... 63 Hz	47 ... 63 Hz
  Input current
  ● at rated input voltage 100 V		0.63 A	1.6 A
  ● at rated input voltage 230 V		0.31 A	0.8 A
  Switch-on current limiting (+25 °C), max.		33 A	31 A
  I²t, max.		1.2 A²·s	3 A²·s
  Built-in incoming fuse		internal	internal
  Protection in the mains power input (IEC 898)		Recommended miniature circuit breaker: from 16 A characteristic B or from 10 A characteristic C	Recommended miniature circuit breaker: from 16 A characteristic B or from 10 A characteristic C
  Output
  Output		Controlled, isolated DC voltage	Controlled, isolated DC voltage
  Rated voltage Vout DC		12 V	12 V
  Total tolerance, static ±		3 %	3 %
  Static mains compensation, approx.		0.5 %	0.5 %
  Static load balancing, approx.		1 %	1 %
  Residual ripple peak-peak, max.		200 mV	200 mV
  Residual ripple peak-peak, typ.		40 mV	80 mV
  Spikes peak-peak, max. (bandwidth: 20 MHz)		300 mV	300 mV
  Spikes peak-peak, typ. (bandwidth: 20 MHz)		50 mV	80 mV
  Adjustment range		10.5 ... 12.9 V	10.5 ... 12.9 V
  Product function Output voltage adjustable		Yes	Yes
  Output voltage setting		via potentiometer	via potentiometer
  Status display		Green LED for output voltage OK	Green LED for output voltage OK
  On/off behavior		Overshoot of Vout approx. 5 %	Overshoot of Vout approx. 1 %
  Startup delay, max.		0.6 s	1 s
  Voltage rise, typ.		10 ms	500 ms
  Rated current value Iout rated		2 A	6.5 A
  Current range		0 ... 2 A	0 ... 6.5 A
  ● Note		+55 ... +70 °C: Derating 3%/K	+50 ... +70 °C: Derating 3.5%/K
  Supplied active power typical		24 W	78 W
  Parallel switching for enhanced performance		Yes; Start-up with single nominal load only	Yes; Start-up with single nominal load only
  Numbers of parallel switchable units for enhanced performance		2	2
  Efficiency
  Efficiency at Vout rated, Iout rated, approx.		82 %	86 %
  Power loss at Vout rated, Iout rated, approx.		5.8 W	12.5 W
  Power loss [W] during no-load operation maximum		0.75 W	0.75 W
  Closed-loop control
  Dynamic mains compensation (Vin rated ±15 %), max.		0.1 %	0.1 %
  Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ.		3 %	3 %
  Load step setting time 10 to 90%, typ.		4 ms	3 ms
  Load step setting time 90 to 10%, typ.		3 ms	3 ms
  Protection and monitoring
  Output overvoltage protection		Yes, according to EN 60950-1	Yes, according to EN 60950-1
  Current limitation, typ.		2.4 A	7.2 A
  Property of the output Short-circuit proof		Yes	Yes
  Short-circuit protection		Electronic shutdown, automatic restart	Electronic shutdown, automatic restart
  Overload/short-circuit indicator		-	-
  Safety
  Primary/secondary isolation		Yes	Yes
  Galvanic isolation		Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
  Protection class		Class I	Class I
  Leakage current
  ● maximum		3.5 mA	3.5 mA
  ● typical		0.4 mA	0.4 mA
  CE mark		Yes	Yes
  UL/cUL (CSA) approval		cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)	cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)
  Explosion protection		ATEX (EX) II 3G Ex nA IIC T4; cCSAus (CSA C22.2 No. 213-M1987, ANSI/ISA-12.12.01-2007) Class I, Div. 2, Group ABCD, T4	ATEX (EX) II 3G Ex nA IIC T4; cCSAus (CSA C22.2 No. 213-M1987, ANSI/ISA-12.12.01-2007) Class I, Div. 2, Group ABCD, T4
  FM approval		-	-
  CB approval		Yes	Yes
  Marine approval		GL, ABS	GL, ABS
  Degree of protection (EN 60529)		IP20	IP20
  EMC
  Emitted interference		EN 55022 Class B	EN 55022 Class B
  Supply harmonics limitation		not applicable	EN 61000-3-2
  Noise immunity		EN 61000-6-2	EN 61000-6-2
  Operating data
  Ambient temperature
  ● during operation		-20 ... +70 °C	-20 ... +70 °C
  — Note		with natural convection	with natural convection
  ● during transport		-40 ... +85 °C	-40 ... +85 °C
  ● during storage		-40 ... +85 °C	-40 ... +85 °C
  Humidity class according to EN 60721		Climate class 3K3, no condensation	Climate class 3K3, no condensation
  Mechanics
  Connection technology		screw-type terminals	screw-type terminals
  Connections
  ● Supply input		L, N, PE: Removable screw terminal, each for 1 x 0.5 ... 2.5 mm²	L, N, PE: Removable screw terminal, each for 1 x 0.5 ... 2.5 mm²
  ● Output		+: 1 screw terminal for 0.5 ... 2.5 mm²; -: 2 screw terminals for 0.5 ... 2.5 mm²	+: 1 screw terminal for 0.5 ... 2.5 mm²; -: 2 screw terminals for 0.5 ... 2.5 mm²
  ● Auxiliary		-	-
  Width of the enclosure		30 mm	52.5 mm
  Height of the enclosure		80 mm	80 mm
  Depth of the enclosure		100 mm	100 mm
  Required spacing
  ● top		50 mm	50 mm
  ● bottom		50 mm	50 mm
  ● left		0 mm	0 mm
  ● right		0 mm	0 mm
  Weight, approx.		0.12 kg	0.32 kg
  Product feature of the enclosure housing for side-by-side mounting		Yes	Yes
  Installation		Snaps onto DIN rail EN 60715 35x7.5/15	Snaps onto DIN rail EN 60715 35x7.5/15
  Electrical accessories		Removable spring-type terminal 6EP1971-5BA00	Removable spring-type terminal 6EP1971-5BA00
  MTBF at 40 °C		3 737 060 h	2 853 800 h
  Other information		Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

  
  

  Дополнительно

  SITOP Power PSU100C accessories	6EP1971-5BA00
  Removable spring-loaded terminal, 100 units, for SITOP PSU100C