SINUMERIK MCP Interface PN

• Заказные данные
  (1)
• Аксессуары
  (3)
• Информационные материалы

  Информационные материалы

  The SINUMERIK MCP Interface PN enables customer-specific machine control panels to be connected via PROFINET.

  On the SINUMERIK MCP Interface PN, digital inputs, outputs, connections for rotary override switches and handwheels are provided as well as two Industrial Ethernet interfaces for communication.

  Дизайн

  You can connect the following operator controls to the SINUMERIK MCP Interface PN:

  • 80 single keys
  • 64 LEDs
  • 2 handwheels
  • 2 rotary override switches

  The following inputs/outputs are also available:

  • 9 digital inputs (5 V)
  • 6 digital inputs (24 V)
  • 15 digital outputs (24 V each 0.15 A)

  Интеграция

  The SINUMERIK MCP Interface PN can be used for:

  • SINUMERIK 828D BASIC
  • SINUMERIK 828D
  • SINUMERIK 840D sl

  Технические данные

  Order number		6FC5303-0AF03-0AA0
  Product brand name		SINUMERIK
  Product designation		MCP Interface PN
  Supply voltage at DC		24 V
  Active power consumption maximum		62.4 W
  ● Note		Of all connectable operator controls, intrinsic consumption 2.4 W
  Degree of protection		IP00
  Environmental category acc. to IEC 60721-3-3		Condensation and icing excluded. Low air temperature 0 °C (32 °F).
  Relative humidity at 25 °C (77 °F), during
  ● storage		5 ... 95 %
  ● transport		5 ... 95 %
  ● operation		5 ... 95 %
  Ambient temperature, during
  ● storage		-25 ... +55 °C (-13 ... +131 °F)
  ● transport		-40 ... +70 °C (-40 ... +158 °F)
  ● operation
  — front		0 ... 45 °C (32 ... 113 °F)
  — rear		0 ... 55 °C (32 ... 131 °F)
  Width		242 mm (9.52756 in)
  Height		152 mm (5.98425 in)
  Depth		36 mm (1.41732 in)
  Net weight		0.557 kg (1.22798 lb)
  Certificate of suitability		CE, cULus, EAC