- Каталог оборудования Siemens
- Каталог продуктов Siemens Industry
- Приводная техника
- Преобразователи
- Стандартные преобразователи
- Общая информация о базовых преобразователях SINAMICS V
- Преобразователи частоты общего назначения SINAMICS G
- Высокопроизводительные преобразователи SINAMICS S
- Сервопреобразователь SINAMICS S110
- SINAMICS S120
- SINAMICS S120M distributed servo drive
- SINAMICS S120 Combi
- SINAMICS S120 Combi Power Modules
- External fan module, reinforcement plates
- External fan module, reinforcement plates
- Line reactors
- Line filters
- SINAMICS S120 booksize compact format
- Модуль-концентратор DMC20 DRIVE-CLiQ
- Модуль - концентратор DME20 DRIVE-CLiQ Hub
- Клеммный модуль TM54F
- Модуль датчиков SMC10
- Модуль датчиков SMC20
- Модуль датчиков SMC30
- SMC40 Sensor Module Cabinet-Mounted
- Модули датчиков SME120/SME125
- Drive Based Safety Integrated
- SINAMICS S120 Chassis Format Units
- SINAMICS S120 Cabinet Modules
- SINAMICS S150 converter cabinet units
- MICROMASTER
- SIPLUS POSMO A
- SIMODRIVE POSMO
- LOHER DYNAVERT Drive System
- Преобразователи на среднее напряжение
- Преобразователи постоянного тока
- Стандартные преобразователи
- Двигатели переменного тока
- Generators
- Мотор-редукторы
- Flender Gear Units
- Couplings
- Инструментальное программное обеспечение
- Дополнительные компоненты
- Преобразователи
- Техника автоматизации
- Energy
- Автоматизация и безопасность зданий
- Низковольтная коммутационная техника
- Технология безопасности
- Системные решения и продукты для отраслей
- Сервис
- Приводная техника
External fan module, reinforcement plates
- Заказные данные (1)
- Аксессуары (1)
- Информационные материалы
Информационные материалы
External fan module
The external fan module combined with the reinforcement plates is employed to provide perfect cooling of a SINAMICS S120 Combi Power Module.
To cool the SINAMICS S120 Combi Power Module, a volumetric flow of air of at least 160 m3/h through the heatsink is required.
The external fan module supplies a maximum volumetric flow of 290 m3/h. This dimensioning ensures an adequate air flow rate, even with a lower supply voltage or with a slightly soiled heatsink.
Due to the encapsulated electronics and the ball-bearing-mounted closed rotor, the fan module can be used even under exacting environmental conditions. The fans are equipped with electronic reverse-polarity, blocking and overload protection systems. To ensure maximum machine availability, the fan speed is monitored. A user alarm is displayed if the fan stops.
Reinforcement plates
It is essential to ensure that the air actually flows through the heatsink. The gap between the fan module and heatsink must therefore be closed. The reinforcement plates must be used for this purpose where possible. The reinforcement plates
- close the gap between the fan module and heatsink
- reinforce the rear wall of the control cabinet for sealed installation
- guarantee ideal ventilation spaces
Технические данные
Article No.
6SL3161-0EP00-0AA0
Product name
External fan module
Rated voltage DC
24 V
Voltage range DC
20.4 … 28.8 V
Volumetric flow, max.
290 m3/h (10241 ft3/h)
Current consumption
0.8 A
Power consumption
18 W
Ambient temperature, max.
-20 ... +70 °C (-4 ... +158 °F)
Service life
- At 55 °C (131 °F)
50000 h
- At 70 °C (158 °F)
20000 h
Degree of protection
IP54
Height
258 mm (10.16 in)
Width
104 mm (4.09 in)
Depth
86 mm (3.39 in)
Net weight
1.5 kg (3.31 lb)
Certificate of suitability
CSA, UL, VDE
Article No.
6SL3161-1LP00-0AA0
Product name
Reinforcement plate
Height
575 mm (22.64 in)
Width
15 mm (0.59 in)
Depth
75 mm (2.95 in)
Net weight
0.75 kg (1.65 lb)