IFN ANALOGINPUT

• Заказные данные
  (2)
• Информационные материалы

  Информационные материалы

  The IFN ANALOGINPUT (IFN AI) and IFN ANALOGINPUT-DISTANCE (IFN AI-D) are two robust interface nodes for SIPLUS CSM4000:

  • For provision of analog measured data for further processing in combination with the CMS X‑Tools software (X‑Tools must be ordered separately, see "Analysis Software" → "CMS X‑Tools")
  • The IFN AI has a measuring range of -10 V to +10 V and the IFN AI-D has an extended voltage range of -20 V to +20 V.
  • Can be used for high-accuracy, continuous monitoring in harsh environments

  Область применения

  The IFN ANALOGINPUT is a robust interface node for SIPLUS CMS4000, designed for detecting voltages (-10 V to +10 V) in the frequency range from 0 Hz to 40 kHz.

  The IFN ANALOGINPUT is used for high-accuracy, continuous monitoring in harsh environments.

  Дизайн

  The fronts of the IFN AI and IFN AI-D feature:

  • LEDs for status display
  • Six connections for analog inputs (-10 V to +10 V, -20 V to +20 V)
  • Three connections for IEEE1394 bus system
  • One connection for power supply

  Connection to the higher-level evaluation PC is via an IEEE1394 bus system operating at 400 Mbit/s.

  The module can be mounted on an IEC rail or with mounting brackets.

  Функции

  The IFN ANALOGINPUT enables up to six analog signals (-10 V to +10 V) to be recorded.

  The maximum sampling frequency is 192 kHz per channel.

  Чертеж

  IFN ANALOGINPUT

  Особенности

  • Thanks to the rugged design and IP67 degree of protection, the IFN ANALOGINPUT is suitable for use in rough industrial environments.
  • The compact design permits applications in confined areas.
  • Easy handling facilitates efficient commissioning and maintenance.

  Технические данные

  Order number		6AT8000-1BB00-0XA0	6AT8000-1BB00-2XA0
  		SIPLUS CMS4000 Interface Node AI	SIPLUS CMS4000 Interface Node AI-D
  General information
  Product brand name		SIPLUS
  Product designation		IFN Analoginput	IFN AI-D
  Product description		Up to six analog input signals can be measured with the IFN AI.	Up to six analog input signals can be measured with the IFN AI-D in the range of ±20 V.
  Installation type/mounting
  Mounting type		standard rail
  Mounting accessories		Mounting bracket, can be ordered as option
  Required clearance
  ● for side-by-side mounting at the top		25 mm
  ● for side-by-side mounting at the front		80 mm
  ● for side-by-side mounting at the back		25 mm
  Supply voltage
  Type of power supply		stabilized
  Supply voltage (DC)		24 V
  permissible range, lower limit (DC)		18 V
  permissible range, upper limit (DC)		32 V
  Reverse polarity protection		Yes
  Overvoltage protection		max. 35 V
  Input current
  from external supply (24 V DC), max.		0.2 A
  Power
  Active power input, max.		4.8 W
  Analog inputs
  Number of analog inputs		6
  Designation of the analog input		CH1 ... CH6
  Measured variable		Voltage
  Connector type		Connector plug 5-pole (M12)
  Electrical input frequency, min.		0 Hz
  Electrical input frequency, max.		96 kHz
  Overvoltage strength, min.		-60 V
  Overvoltage strength, max.		60 V
  Short-circuit detection		No
  Input ranges (rated values), voltages
  ● At DC, min.		-10 V	-20 V
  Input ranges (rated values), currents
  ● with DC		0.012 mA
  Analog value generation for the inputs
  Parameterizable down sampling frequencies		4 / 8 / 16 / 24 / 48 / 64 / 96 kHz
  Sampling frequency, max.		192 kHz
  Integration and conversion time/resolution per channel
  ● Resolution with override range (bit including sign)		16 bit
  Errors/accuracies
  Relative measuring accuracy for analog input signals, min.		-0.5 %
  Relative measuring accuracy for analog input signals, max.		0.5 %
  Crosstalk attenuation between analog input signals at 1 kHz		-90 dB
  Signal-to-noise ratio for analog input signals		-80 dB
  Interfaces
  Number of interfaces		3
  Transmission rate		400 Mbit/s
  Protocols
  Protocol		IEEE 1394a/b
  Potential separation
  Potential separation analog inputs
  ● Potential separation analog inputs		Yes
  Degree and class of protection
  IP degree of protection		IP67
  Standards, approvals, certificates
  Certificate of suitability		CE
  Ambient conditions
  Ambient temperature during operation
  ● min.		-40 °C
  ● max.		65 °C
  Ambient temperature during storage/transportation
  ● Storage, min.		-40 °C
  ● Storage, max.		85 °C
  ● Transportation, min.		-40 °C
  ● Transportation, max.		85 °C
  Connection method
  Design of electrical connection for the PE conductor		M4 screw with contact washer
  ● Connectable conductor cross-section for PE terminal		2.5 mm²
  Design of plug-in connection		Connector plug 8-pole (M12)
  Design of the pin assignment of the inputs		Male connector 5-pole (M12)
  Mechanics/material
  Material of housing		aluminum
  Dimensions
  Width		86 mm
  Height		210 mm
  Depth		87 mm
  Width when mounted on DIN rail		86 mm
  Height when mounted on DIN rail		210 mm
  Depth when mounted on DIN rail		96 mm
  Weights
  Weight (without packaging)		1.23 kg

  
  

  Дальнейшая информация

  For further product details, refer to the

  • "IFN ANALOGINPUT" Operating Instructions, http://support.automation.siemens.com/WW/view/en/40839593
  • "IFN ANALOGINPUT-DISTANCE" Operating Instructions, http://support.automation.siemens.com/WW/view/en/87451079