MDS D124

• Заказные данные
  (1)
• Аксессуары
  (1)
• Информационные материалы

  Информационные материалы

  The MDS D124 is a mobile, passive, maintenance-free transponder based on the ISO 15693 standard.

  The MDS D124 can be used for the RFID system MOBY D as well as for SIMATIC RF200 and SIMATIC RF300 (ISO mode).

  Область применения

  This transponder can even be used problem-free under extreme environmental conditions (e.g. when subjected to temperatures up to +180 °C).

  Чертеж

  

  MDS D124 transponder

  Технические данные

  Order number		6GT2600-0AC10
  Product type designation		MDS D124 transponder
  Suitability for operation		RF200, RF300, MOBY D
  Wireless frequencies
  Operating frequency Rated value		13.56 MHz
  Electrical data
  Range maximum		300 mm; range is reader dependent: observe http://support.automation.siemens.com/WW/view/en/67384964
  Protocol with radio transmission		ISO 15693
  Transfer rate with radio transmission maximum		26.5 kbit/s
  Product feature multitag-capable		Yes
  Product component Backup battery		No
  Memory
  Type of memory		EEPROM
  Storage capacity of the user memory		112 byte
  Type of memory organization		UID (fixed code) 8 bytes, user memory 112 bytes, configuration memory 8 bytes
  Number of read cycles at ambient temperature < 40 °C maximum		100 000 000 000 000
  Number of write cycles at ambient temperature < 40 °C maximum		1 000 000
  Data retention time at ambient temperature < 40 °C not less than		10 y
  Property of memory		Block-by-block write protection of the user memory
  Type of transponder chip used		NXP I-Code SLI
  Mechanical data
  Material		PPS
  Color		black
  Tightening torque of the screw for securing the equipment maximum		1 N·m
  Mounting distance relating to metal surfaces recommended minimum		15 mm
  Permitted ambient conditions
  Ambient temperature
  ● during read/write access		-25 ... +125 °C
  ● outside the read/write area		-40 ... +180 °C
  ● during storage		-40 ... +125 °C
  Ambient condition for operation		Operating temperature permanent up to 100 °C, at 180 °C: up to 5000 hours or 3000 temperature cycles
  Protection class IP		IP68 / IPx9K
  Shock resistance		According to DIN EN 60721-3-7 Class 7 M3
  Shock acceleration		1 000 m/s²
  Vibrational acceleration		200 m/s²
  Design, dimensions and weight
  Height		4 mm
  Diameter		27 mm
  Net weight		5 g
  Mounting type		M3 screw, gluing
  Product properties, functions, components general
  Product feature
  ● silicon-free		Yes
  ● printable		No
  Standards, specifications, approvals
  Certificate of suitability		Ex: II 1 G Ex ia IIC T3 T6 Ga / II 1 D Ex ia IIIC T80°C T180°C
  MTBF		171 y
  Accessories
  accessories		Mounting support and spacer