MDS D160

Заказные данные
(1)
Аксессуары
(1)

Информационные материалы

The MDS D160 is a passive, maintenance-free and rugged transponder based on the ISO 15693 standard.

The MDS D160 can be used for the RFID system MOBY D as well as for SIMATIC RF200 and SIMATIC RF300 (ISO mode).

Область применения

Typical applications are, for example:

Rented work clothing
Hotel laundry
Surgical textiles
Hospital clothing
Dirt collection mats
Clothing for nursing homes/hostels

Чертеж

MDS D160 transponder

Технические данные

Order number		6GT2600-0AB10
Product type designation		MDS D160 transponder
Suitability for operation		RF200, RF300, MOBY D
Wireless frequencies
Operating frequency Rated value		13.56 MHz
Electrical data
Range maximum		180 mm; range is reader dependent: observe http://support.automation.siemens.com/WW/view/en/67384964
Protocol with radio transmission		ISO 15693
Transfer rate with radio transmission maximum		26.5 kbit/s
Product feature multitag-capable		Yes
Product component Backup battery		No
Memory
Type of memory		EEPROM
Storage capacity of the user memory		112 byte
Type of memory organization		UID (fixed code) 8 bytes, user memory 112 bytes, configuration memory 8 bytes
Number of read cycles at ambient temperature < 40 °C maximum		100 000 000 000 000
Number of write cycles at ambient temperature < 40 °C maximum		1 000 000
Data retention time at ambient temperature < 40 °C not less than		10 y
Property of memory		Block-by-block write protection of the user memory
Type of transponder chip used		NXP I-Code SLI
Mechanical data
Material		PPS
Color		beige
Mounting distance relating to metal surfaces recommended minimum		10 mm
Permitted ambient conditions
Ambient temperature
● during read/write access		-25 ... +85 °C
● outside the read/write area		-40 ... +175 °C
● during storage		-25 ... +100 °C
Ambient condition for operation		Operating temperature permanent up to 100 °C, up to 175 °C min. 100 washing cycles, one time up to 220 °C for 30 s
Protection class IP		IP68 / IPx9K
Shock resistance		According to DIN EN 60721-3-7 Class 7 M3
Shock acceleration		400 m/s²
Vibrational acceleration		100 m/s²
Design, dimensions and weight
Height		3 mm
Diameter		16 mm
Net weight		1.2 g
Mounting type		patch, sewing, gluing
Product properties, functions, components general
Product feature
● printable		No
Standards, specifications, approvals
MTBF		228 y
Accessories
accessories		Mounting support and spacer