IO-Link master modules

• Заказные данные
  (1)
• Аксессуары
  (3)
• Информационные материалы

  Информационные материалы

  • 45 mm wide 4 IO-LINK HF electronic module
  • 4 IO-Link ports according to IO Link specification V1.1
  • Port Class B
  • The IO-Link parameters are configured using the Port Configuration Tool (S7-PCT), version V3.4 and higher

  Область применения

  The 4 IO-LINK HF electronic module facilitates data exchange with up to 4 IO-Link devices.
  Since IO-Link is compatible with standard sensors, commercially available sensors in accordance with IEC 61131 Type 1 can also be operated on the IO-Link master.

  Дизайн

  The 4 IO-LINK HF electronic module is used together with the CM IO-LINK 4 X M12 P connection module. Sensors and actuators are integrated using commercially available 3 or 5-pin M12 connectors on the CM IO-LINK 4 X M12 P.

  IO-Link devices (e.g. sensors) with a Class A port are connected using a 3-wire cable. IO-Link devices that require additional supply voltage and have a Class B port (e.g. actuators) are connected using a 5-wire cable.

  Технические данные

  Order number		6ES7147-4JD00-0AB0
  		ET200pro, EM 4 IO-Link HF
  Supply voltage
  Rated value (DC)		24 V
  Reverse polarity protection		Yes
  Load voltage 2L+
  ● Rated value (DC)		24 V
  ● Short-circuit protection		Yes
  ● Reverse polarity protection		Yes; against destruction; load increasing
  Input current
  from supply voltage 1L+, max.		40 mA
  from load voltage 2L+ (without load), max.		20 mA
  from backplane bus 3.3 V DC, max.		20 mA
  Encoder supply
  Number of outputs		4
  Short-circuit protection		Yes; per module, electronic
  Output current
  ● up to 55 °C, max.		2 A
  Power loss
  Power loss, typ.		2.6 W
  IO-Link
  Number of ports		4
  ● of which simultaneously controllable		4
  IO-Link protocol 1.0		Yes
  IO-Link protocol 1.1		Yes
  Transmission rate		4.8 kBaud (COM1); 38.4 kBaud (COM2), 230.4 kBaud (COM3)
  Size of process data, input per port		32 byte
  Size of process data, input per module		32 byte
  Size of process data, output per port		32 byte
  Size of process data, output per module		32 byte
  Memory size for device parameter		2 kbyte; for each port
  Master backup		Possible with function block IO_LINK_MASTER
  Cable length unshielded, max.		20 m
  Operating modes
  ● IO-Link		Yes
  ● DI		Yes
  ● DQ		Yes; max. 100 mA
  Connection of IO-Link devices
  ● Port type A		Yes; via 3-core cable
  ● Port type B		Yes; Additional device supply: for X1 and X2 max. 2 A in total, for X3 and X4 max. 2 A in total
  Interrupts/diagnostics/status information
  Diagnostic functions		Yes
  Alarms
  ● Diagnostic alarm		Yes
  Diagnostic messages
  ● Diagnostic information readable		Yes
  ● Wire-break		Yes
  ● Short-circuit		Yes
  Diagnostics indication LED
  ● Channel status display		Yes; One green LED for channel status Qn (SIO mode) and port status IO-Ln (IO-Link mode)
  ● Group error SF (red)		Yes
  ● Channel fault indicator F (red)		Yes; combined with the IO-Link port status
  Parameter
  Diagnostics wire break		channel by channel
  Diagnostics short-circuit		channel by channel
  Potential separation
  between the load voltages		Yes
  between backplane bus and all other circuit components		Yes
  Potential separation channels
  ● between the channels		No
  Isolation
  Isolation tested with		707 V DC (type test)
  Dimensions
  Width		45 mm
  Height		130 mm
  Depth		35 mm
  Weights
  Weight, approx.		150 g