SIPLUS ET 200MP IM 155-5 PN ST TX RAIL

• Заказные данные
  (1)
• Информационные материалы

  Информационные материалы

  • Interface module for linking the ET 200MP to PROFINET
  • Approved in accordance with the railway standards EN 50155, EN 15121, EN 50124, EN 50125 and EN 45545 for use in rail traffic
  • Handles data exchange with the PROFINET I/O controller in the PLC
  • Integrated 2-port switch for line topology
  • Max. 30 I/O modules
  • Shortest bus cycle 250 µs
  • Linking to the isochronous task of the CPU
  • Prioritized fast startup (FSU) with 500 ms (max. 12 I/O modules)
  • Media Redundancy Protocol (MRP)
  • Shared device on up to 2 I/O controllers (when configuring using GSD file; depends on the respective configuration tool)
  • Omission of SIMATIC memory card (SMC); IM replacement without PG using LLDP

  Область применения

  The SIPLUS ET 200MP IM 155-5 PN ST TX RAIL interface module enables the connection of the ET 200MP to PROFINET and handles communication between the modules and the higher-level I/O controller autonomously.

  Дизайн

  The SIPLUS ET 200MP IM 155-5 PN ST TX RAIL interface module is screwed directly onto the S7-1500 rail. It incorporates:

  • Diagnostics displays for errors (Error), operation (RUN), maintenance (MAINT), and one link LED per port
  • Connection to PROFINET using RJ45 connector
  • 24 V DC supply unit for looping through the supply voltage
  • Protection of interface module against unauthorized access possible using lock, seal or cable tie

  Технические данные

  Order number		6AG2155-5AA00-4AB0
  		SIPLUS ET 200MP IM 155-5 PN ST TX RAIL
  General information
  Product type designation		IM 155-5 PN ST
  Product function
  ● I&M data		Yes; I&M0 to I&M3
  Supply voltage
  Type of supply voltage		DC
  Rated value (DC)		24 V
  Reverse polarity protection		Yes
  Short-circuit protection		Yes
  Mains buffering
  ● Mains/voltage failure stored energy time		5 ms
  Hardware configuration
  Rack
  ● Modules per rack, max.		30; I/O modules
  Interfaces
  Number of PROFINET interfaces		1
  1. Interface
  Interface types
  ● Number of ports		2
  ● integrated switch		Yes
  ● RJ 45 (Ethernet)		Yes
  Functionality
  ● PROFINET IO Device		Yes
  ● Media redundancy		Yes
  Interface types
  RJ 45 (Ethernet)
  ● Transmission procedure		PROFINET with 100 Mbit/s full duplex (100BASE-TX)
  ● 100 Mbps		Yes
  ● Autonegotiation		Yes
  ● Autocrossing		Yes
  PROFINET IO Device
  Services
  — Isochronous mode		Yes
  — IRT		Yes
  — MRP		Yes
  — Prioritized startup		Yes
  — Shared device		Yes
  — Number of IO Controllers with shared device, max.		2
  Open IE communication
  ● TCP/IP		Yes
  ● SNMP		Yes
  ● LLDP		Yes
  Isochronous mode
  Isochronous operation (application synchronized up to terminal)		Yes
  Equidistance		Yes
  shortest clock pulse		250 µs
  max. cycle		4 ms
  Interrupts/diagnostics/status information
  Status indicator		Yes
  Alarms		Yes
  Diagnostic functions		Yes
  Diagnostics indication LED
  ● RUN LED		Yes; Green LED
  ● ERROR LED		Yes; Red LED
  ● MAINT LED		Yes; yellow LED
  ● Connection display LINK TX/RX		Yes; yellow LED
  Isolation
  Isolation tested with		707 V DC (type test) and according to EN 50155 (routine test)
  Standards, approvals, certificates
  Railway application
  ● EN 50121-3-2		Yes; EMC for rail vehicles
  ● EN 50121-4		Yes; EMC for signal and telecommunications systems
  ● EN 50124-1		Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.5 kV; UNm = 24 V DC
  ● EN 50125-1		Yes; Rail vehicles - see ambient conditions
  ● EN 50125-2		Yes; Stationary electrical equipment - see ambient conditions
  ● EN 50125-3		Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track)
  ● EN 50155		Yes; Rail vehicles - temperature class Tx, horizontal mounting position, salt spray Class ST2
  ● EN 61373		Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B
  ● Fire protection acc. to EN 45545-2		Yes; Rail vehicles - verification on request
  Ambient conditions
  Ambient temperature during operation
  ● horizontal installation, min.		-40 °C; = Tmin
  ● horizontal installation, max.		70 °C; = Tmax; from > +60 °C no module permissible left of the IM; +85 °C for 10 min. (Tx acc. to EN 50155)
  Extended ambient conditions
  ● relative to ambient temperature-atmospheric pressure-installation altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
  Relative humidity
  — With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
  Resistance
  — against biologically active substances / conformity with EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
  — against biologically active substances/conformity with EN 60721-3-5		Yes; Class 5B2 mold and fungal spores (excluding fauna). The supplied plug covers must remain in place over the unused interfaces during operation!
  — against chemically active substances / conformity with EN 60721-3-3		Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
  — against chemically active substances/conformity with EN 60721-3-5		Yes; Class 5C3 (RH < 75%) including salt spray according to EN 50155 (ST2). The supplied plug covers must remain in place over the unused interfaces during operation!
  — against mechanically active substances / conformity with EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
  — against mechanically active substances/conformity with EN 60721-3-5		Yes; Class 5S3 including sand and dust. The supplied plug covers must remain in place over the unused interfaces during operation!
  Dimensions
  Width		35 mm
  Height		147 mm
  Depth		129 mm
  Weights
  Weight, approx.		310 g
  Other
  Note:		For use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A Online Support article 109736776