- Каталог оборудования Siemens
- Каталог продуктов Siemens Industry
- Приводная техника
- Техника автоматизации
- Системы автоматизации
- Системы визуализации SIMATIC HMI
- Системы идентификации
- Промышленные коммуникации SIMATIC NET
- Промышленные аппараты управления SIRIUS
- Промышленные информационные технологии
- Управление на базе РС
- Системы управления процессом
- Контрольно-измерительные приборы
- Анализаторы процесса
- Блоки питания SITOP
- Продукты для специальных требований
- Energy
- Автоматизация и безопасность зданий
- Низковольтная коммутационная техника
- Технология безопасности
- Системные решения и продукты для отраслей
- Сервис
- Заказные данные (1)
- Аксессуары (3)
- Информационные материалы
Информационные материалы
SIMATIC MV320 is a rugged, powerful industrial barcode and data matrix code reader suitable for high resolutions. This handheld reader reads two-dimensional (2D) data matrix codes and one-dimensional (1D) barcodes. It can read medium to high contrast data matrix codes. The cell size should be larger than 0.13 mm. Barcodes can be read if the width of a bar is larger than 0.12 mm.
The reader possesses complex image processing functions and illumination technology in order to read codes on many different surfaces.
The SIMATIC MV320 handheld reader is suitable for wired communication. Due to the varied interface technology (USB, RS232), simple integration into your application is possible with the device.
The optical SIMATIC MV320 handheld reader is supplied as a package including USB cable. A separate package comprising cable and power supply is available for use as an RS232 version.
Дизайн
The SIMATIC MV320 handheld reader features a robust, ergonomic handle with integrated strain relief.
The SIMATIC MV320 is a monolithic product and thus extremely robust. The only replaceable component is the cable that is connected to the reader with protected strain relief but can nevertheless be easily replaced for the purpose of changing the interface technology.
Интеграция
The SIMATIC MV320 handheld readers can communicate with the host computer by means of RS232 and USB. No special software is required for this purpose. The SIMATIC MV320 is configured by reading supplied data matrix codes.
The optical handheld reader can only be operated via RS232 and USB for direct transfer of the codes to the host computer. "Batch mode" is not possible.
Чертеж
SIMATIC MV320 optical handheld reading device
Технические данные
Order number
6GF3320-0HT01
Suitability for operation
1D/2D: Aztec, Codabar, Codablock F, Code 11, Code 39, Code 39 Short Margin, Code 39 Extended Full ASCII, Code 39 Checksum, Code 93, Code 128, Code 128 Short Margin, Composite, Data Matrix, Data Matrix Rectangle, Data Matrix Inverse, GS1 DataBar (all), Interleaved 2of5, Interleaved 2of5 - 2 Digits, Macro PDF417, Maxicode, Matrix 2of5, Micro PDF417, MSI Plessy, NEC 2of5, OCR, PDF417, Postal Codes (All), QR Code, Telepen, UPC, UPC Short Margin, UPC Extension
Range
20 ... 375 mm
Range Note
Code-dependent
Optical data
Design of image sensor of the camera
CMOS 1280 x 960, image resolution 960 x 640
Mounting type of lens
Integrated
Type of light source
Lighting system comprising incident light (red)
Image acquisition frequency maximum
10 Hz
Type of focusing
Fixed focus, optimum focal point at 6.3 mm
Supply voltage, current consumption, power loss
Type of current supply
Via USB or external plug-type power supply unit (RS232), 5 V, 410 mA
Type of battery
--
Permitted ambient conditions
Ambient temperature
● during operation
-20 ... +55 °C
● during storage
-30 ... +65 °C
Relative humidity at 25 °C without condensation during operation maximum
95 %
Height of fall maximum
1.8 m
Design, dimensions and weight
Width
132 mm
Height
52 mm
Depth
92 mm
Net weight
0.13 kg
Product properties, functions, components general
Design of the display
2 LEDs
Operator element version
Trigger in handle
Design of acoustic signaling element
Vibration alarm, audible signal
Design of the interface
USB, RS232
Product functions management, configuration
Product function of the software
Read, display, save, transfer codes
Type of programming
Optical parameterization or via configuration software
Accessories
accessories
RS232 cable with power supply, USB cable, stand
